Products in Exterior & Body: Glass Beads & Fibers

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

3B Fiberglass DS 8800-11P is a glass chopped strand specifically designed to rein-force high performance thermoplastic polymers, including PPS, PES, PSU, PPSU, PEI and PEEK. Furthermore, it shows interesting benefits in reinfor-cing PBT resins. 3B’s state-of-the-art manufacturing technology provides to DS 8800-11P very good strand integri-ty and bulk density leading to smooth compounders feeding, with low fuzz generation. DS 8800-11P displays excellent dis-persion within a large range of resin viscosities, enabling high glass fiber contents (> 55%). It is known for final reinforced parts’ heat stability and high mechanical properties combi-ned with hydrolysis/glycolysis perfor-mances that are rated from high to even outstanding specifically in PPS. DS 8800 -11P also meets stringent requirements of food contact and drinkable water standards such as EC 10/2011, FDA, BfR and ACS.

Microglass® glass flakes ® comes in scale-like glass flakes. Utilizing its own proprietary technology, NSG Group is the only manufacturer of glass flakes in Japan. Two types of glass are used for glass flakes E®, namely, C glass and E glass. C glass contains alkali components and has high acid resistance. E glass contains almost no alkali and so, it has high stability in resin and no electrical conductivity. For each type, NSG Group also offers surface treatment to improve compatibility with resins.

TG-18-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Conformat® N720 is a continuous strand, glass fiber reinforcing mat. N720 is a semi-porous reinforcing mat developed specifically for pultrusion applications requiring reinforcement and enhanced surface appearance.

3B Fiberglass CR 2080 consists of multiple continuous strands of smaller tex made from 3B E-CR glass wound onto a bobbin shape without mechanical twist and is free from static electricity generation.Choppable Roving CR2080 is silane sized and specifically designed for Sheet Molding Coumpound (SMC) application. SMC Rovings find appli-cations in automotive parts, sectional panel tanks, electrical items.2080 conforms to BS 14020 and IS 11320.

TG-10-T is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

PA high flow, high content of glass fiber reinforced mechanical properties. Applied in automobile, electric products and machine. PDA approval. (The product is only for global high-end customers)

Carbon-Core M110P120H is Chopped Strand Mat.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

CSV300/45 is Composite felt for pultrusion. It is composed of different types of woven fabrics, multi-axial fabrics and polyester surface felts bonded by hot melt adhesive powder. The weight is 200~900g/㎡, and the width is 50~1500mm. The products are widely used in the production of various pultruded woven products.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

SKAPS TDBM 1105 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Superior Huntingdon Composites M8686 is this is a family of continuous filament reinforcing mats designed for phenolic pultrusion processes. They are treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity.

Owens Corning M123 chopped strand mat represents a versatile solution for a wide range of applications, including open and closed mold, continuous and discontinuous lamination, filament winding, and other processes. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium-Tex multi-chop strands randomly dispersed and bonded together by a highly-soluble polyester powder binder. Certified by Lloyd’s Register of Shipping.

Owens Corning P213 is a multi-end roving represents a compelling solution for the manufacture of glass mat reinforced thermoplastic (GMT) applications. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with polypropylene resin systems.

Carbon-Core M111E250H is Chopped Strand Mat.

Owens Corning M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand lay-up or closed mold processes. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of fine-medium tex multi-chop strands randomly dispersed and bonded together with a highly soluble polyester powder binder. Certified by Lloyd’s Register on their website, the company lists itself as Lloyd’s Register and Det Norske Veritas.

SKAPS DBM 3606 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Conformat N863 is a continuous strand, glass fiber reinforcing mat. N863 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding, Closed Mold Injection, and many other closed molding applications.

SKAPS T 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins