Products in Automotive: Epoxy & Epoxy Derivatives

8329TCS is a 2-part, heat-cure, thermally conductive epoxy adhesive with a 4-hour working time. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal adhesive is used to glue heat sinks to LEDs, CPUs and other heat-generating components. 8329TCS has been designed for maximum thermal conductivity. It is highly viscous and must be mixed by hand prior to application. For a lower viscosity, use 8329TFS. For a shorter working time, use 8329TCM.

8329TCF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, viscous, thixotropic, and bonds well to a wide variety of substrates. It is also flame retardant and meets the UL 94V-0 standard. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours. This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems. 8329TCF has been designed for maximum thermal conductivity with a high viscosity. For a lower viscosity, use 8329TFF. For a longer working life, use 8329TCM or 8329TCS.

ADEKA™ EP-4000, identified by the polymer name epoxy resins and compounds, finds application in engineered and electrical/electronic applications. Noted for its material features of good adhesion and flexibility, this product is specifically tailored for processing methods such as casting in plastics and elastomers. ADEKA™ EP-4000 stands as a reliable choice in industries where superior adhesion, flexibility, and versatile processing methods are essential.

ADEKA™ EP-4100TX, a distinctive epoxy resin and compound blend, features amorphous materials for exceptional properties. Tailored for heat cure processes, this formulation finds its niche in engineered applications within the realm of plastics and elastomers. Specifically designed for casting methods, ADEKA™ EP-4100TX ensures top-notch performance, setting a new standard for reliability and excellence in industrial applications.

ADEKA™ EP-7001, an epoxy resin and compound polymer, is a cutting-edge solution in the realm of plastics technology. Tailored for casting methods, it exhibits remarkable features like good adhesion and flexibility. Positioned for excellence, ADEKA™ EP-7001 finds its applications in the automotive and transportation and electrical and electronics markets, meeting the demands of electrical and electronic applications and engineering applications with precision.

ADEKA™ EPU-7N, an epoxy resin and compound polymer, embodies cutting-edge plastics technology. Engineered with a focus on providing excellent adhesion and flexibility, this polymer ensures optimal performance in diverse applications. ADEKA™ EPU-7N is useful for superior results in the dynamic field of plastics technology.

ADEKA™ EP-4100, an epoxy resin and compound polymer, is designed for versatile applications, serving both general-purpose and engineered applications. Tailored for plastics and elastomer processing methods, particularly casting, ADEKA™ EP-4100 ensures reliable and efficient performance across a spectrum of industrial processes. With a focus on practicality and adaptability, this polymer proves to be a valuable choice for manufacturers seeking a reliable solution for casting applications in the plastics industry.

ADEKA™ EP-4400, a distinguished epoxy resin and compound polymer, excels at catering to the specialized needs of electrical, electronic, and engineered applications. Engineered for casting, its material features, including its amorphous nature and good adhesion, make it an optimal choice for industries requiring reliability and top-notch performance.

BECKOPOX™ EP 140, a liquid binder and resin in the epoxy and epoxy derivatives family by CASE Ingredients, is recognized for its excellent moisture and solvent resistance. Serving the automotive and transportation, building and construction, industrial, and paints and coatings sectors, it offers good adhesion and low shrinkage. This product finds applications in automotive OEM coatings, marine coatings, and industrial settings like tooling and moldmaking. Compatible with metal substrates, its specialized uses encompass adhesives, trowelling, casting, laminating compounds, and coatings demanding high chemical resistance.

BECKOPOX™ EP 385W/56WA, an epoxy and epoxy derivative binder and resin by CASE Ingredients, boasts VOC-free labeling. This dispersion provides corrosion resistance, improved chemical resistance, and enhanced flexibility. Targeting automotive, building and construction, and paints and coatings sectors, it excels in applications like automotive OEM coatings, marine coatings, and decorative finishes on metal surfaces and laminates.

BECKOPOX™ EP 116 is a non-crystallizing liquid resin, tailored for coatings demanding high chemical resistance, as well as adhesives, trowelling, casting, and laminating compounds. Ideal for epoxy coatings, laminates, and solventless or high-solids coatings on metal surfaces, it offers improved chemical resistance and good abrasion resistance. Versatile applications span exterior and interior use, including wallcoverings, decorative laminates, furniture coatings, industrial coatings, and metal coatings. This resin stands out for its adaptability and durability across a spectrum of demanding applications.

EPOXIBOND™ EB-107LP-2 is a two component - optical, medical, and semiconductor grade epoxy resin, with low viscosity, long pot-life, and good handling characteristics.

BECKOPOX™ EP 128 is a liquid binder and resin falling within the epoxy and epoxy derivatives category of CASE Ingredients. Noteworthy for its solvent-free and VOC-free attributes, this product excels in automotive and transportation, building and construction, industrial, and paints and coatings sectors. It offers exceptional chemical and moisture resistance, good adhesion, and low shrinkage. Tailored for applications like automotive OEM coatings, marine coatings, and industrial castings, it is compatible with metal substrates and various coating types, including solvent-borne and high-solids coatings.

ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.

ADEKA™ EP-4005, a stellar member of the epoxy resins and compounds family, is tailored to meet the demands of diverse applications. Boasting features like good adhesion, good flexibility, and low viscosity, this polymer ensures superior performance in both electrical/electronic and engineered applications. Specifically designed for use in casting processes within plastics and elastomers, ADEKA™ EP-4005 stands as a reliable choice for those seeking versatility and excellence in their material formulations.

CHEMSET® EE5210 Thixotropic Epoxy Potting Compound – Black is a two component system with flow-control properties which sets to give a tough, resilient, electrically insulating material. It is resistant to temperature fluctuation and is dimensionally stable even under tropical conditions. It will not cause corrosion nor will it shatter on impact.

UDCarbon® 90CF60-12K is a unidirectional molding compound based on epoxy resin and reinforced with continuous carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

APCM DA 4517 is an epoxy prepreg designed for a temperature range of -67°F (-55°C) to 350°F (177°C), with a cure of 180°F (82°C) for three hour. Shorter cures times are available at higher temperatures. The system is designed to be post cured if the higher temperature service range is required.

HexPly® M34 is an epoxy system, specifically developed for low temperature curing of large structural components, particularly in industrial markets. HexPly® M34 is a self-extinguishing system, providing excellent fire-resistant properties, and meeting the German and French rail qualifications DIN 5510, S3-SR2-ST2 and NF F 16-101 (M2, F1). HexPly® M34 prepreg is ideal for manufacturing sandwich structures, providing excellent adhesion to PVC foam cores. HexPly® M34 exhibits a good shelf life at Room Temperature for a low temperature curing system.

HexPly® M73 is a 350°F (177°C) curing toughened resin with 350°F (177°C) dry and 270°F (132°C) wet service capabilities. HexPly® M73 is formulated for autoclave or press molding and can be cured at 350°F for six hours. A two-hour cure at 350°F with two-hour post-cure at 390°F may also be used. Unidirectional tape and woven fabric impregnated with HexPly® M73 resin will retain tack for 10 or more days at room temperature.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Features Tough and durable Resists breakage and handles challenging functional assemblies Great for snap fits, assemblies and demanding applications Ideal for master patterns for vacuum casting

Toray E731 is a toughened epoxy resin system designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The resin formulation ensures that components are free from white-spots and exhibit high clarity.

Wilko Paint Wilkopon Primer Gray Wilko No. 342.22 is a two-component epoxy polyamide primer that has good early recoat properties. It has excellent sanding and filling properties, which makes it ideal for refinishing surfaces that have been previously coated with epoxies and urethanes. It has excellent adhesion to a wide variety of substrates including concrete, treated galvanized & stainless steel, etched aluminum, and fiberglass-filled polyester plastics.

Toray E732 is a snap cure toughened epoxy resin matrix optimized for press curing (compression molding) prepreg Applicationss. With a cure time of 4 minutes at 160°C (320°F), an onset Tg of 170°C (338°F) is achieved. At this higher temperature, medium-to-high production rates can be accomplished, with customers able to produce beyond 50,000 parts per year. Toray E732 is a versatile matrix with a range of processing options allowing a variety of automotive and industrial Applicationss to be realized.

A hard, accurate plastic with excellent moisture and temperature stability.Applications High temperature requirements Test of water and fluid handling components Wind tunnel models Master patterns Fixtures, gages and jigs Features High stiffness Excellent accuracy Best in class moisture stability Elevated temperature resistance Benefits Stable and rigid parts that withstand adverse environments Outstanding stiffness for demanding applications Ideal for parts requiring high thermal and moisture resistance

CHS-EPOXY 411 is a Semisolid epoxy resin based on Bis A

Lytex® 9063-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.

PRF Composite Materials RP802 is an epoxy tooling prepreg system capable of withstanding temperatures up to 190°C after full post cure. RP-802 is available in carbon and glass woven fabrics from 200 - 800 g/m2 impregnated with epoxy resin. RP-802 prepreg allows high quality tooling laminates to be produced directly from a low temperature master model permitting a wide choice of master model materials. Using a low temperature vacuum bag and autoclave process for inital cure, the tool laminate can then be demoulded for freestanding post cure.

Vetronite® EGS T 23 T is composed of epoxy resin and glass fabric reinforement.

VisiJet® CF-BK Black Rubber-like Material Rubber-like look and feel Extreme flexibility Absorbs shocks and impacts to enhance durability

BC 5003 is a medium viscosity, unfilled laminating system. It is a room temperature curing resin with a relatively short pot life. BC 5003 is also considered an excellent general purpose adhesive for in-shop use. Recommended for use in gluing up BCC's Tooling Board Series.

HexPly® M91 is a high performance, very tough epoxy matrix for use in aerospace primary structures and engines. HexPly® M91 is a toughened, controlled flow, epoxy resin system supplied with unidirectional fibers.

PRF Composite Materials RP549 is a highly toughened modified epoxy prepreg that has been specially formulated for the production of components requiring high mechanical properties and good impact resistance, particularly those exposed to elevated temperatures. This new system has an >200°C Tg following the 180°C cure cycle, and provides excellent mechanical properties in tensile, ILS and flexural strength. RP549 is now in manufacture on a range of our high quality woven fabrics.

SMCarbon® 90CF60-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

VisiJet M5-X is a strong, rigid material with a hybrid ABS/polypropylene-like performance-and-feel that makes brilliant white parts. This material makes bright white parts that look like they've been injection molded. Parts made from this material are rigid, making it an excellent fit for packaging products including bottles, household plastics, piping, valves and other parts that call for stiffness.