Products in Automotive: Glass Beads & Fibers

SKAPS WM 3814 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

STANDARD GLASS UD was specifically developed for leaf springs in the passenger car and truck sectors. The unidirectional fabric saves up to 50% in weight compared to steel, boasts a longer service life and features outstanding fatigue properties. Processed using the RTM process, it can be used with epoxy and PU resins and is ideally suited for high volume production.

Taishan Fiberglass EWR800, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.

This reinforcing mat is a continuous-filament product, which is treated with a suitable bonding resin and coupling agent. It has good handling properties, resists wash in the mold, has good porosity, fast wet through, exceptionally good formability, weight uniformity, and uniform strand integrity.

E01 Emulsion Chopped Strand Mat is made of randomly distributed chopped E6 glass strands held together by an emulsion binder. E01 is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. E01 is designed for use in hand lay-up, filament winding, compression molding and continuous laminating processes. Its end-use applications include boats, bath equipment, automotive parts, chemical corrosion resistant pipes, tanks, cooling towers and building components.

Superior Huntingdon Composites M8635 is this reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and better porosity.

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

Glass Microspheres HGT30 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

This reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and betier porosity.

TG-07-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

7500 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

HBX250CF is a High performance fiber braided sleeve. Carbon fiber yarns are interwoven obliquely or longitudinally to form a preform with a tubular structure. The carbon fiber tow for weaving can be 3K, 6K or 12K. Products are widely used in aerospace, medical applications, shipbuilding, automobiles, sports equipment and other fields.

SKAPS W 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Carbon-Core M110E100H is Chopped Strand Mat.

AeroWindTech AWTFGC 120 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.

Polyform Biaxial 45 is a bidirectional fabric with plies orientated at +45° and -45°. This allows for maximum mechanical properties to be gained in both directions for strategic placement in a structure such as a yacht hull.

TG-06-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

CSM 300 is used in composite materials production as reinforcing filler with unsaturated polyester resins applied.

3B Fiberglass CM 4020 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CFM products contain an insoluble binder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl, ester, epoxy and polyurethane resin systems. The CM 4020 mat is ideally suited for injection molding RTM and S-RIM processes. The CM 4020 mat has a high rigidity which helps to work with large CFM cuts without loosing _x005F_x001f_bres. The ex-cellent mechanical properties provided by CM 4020 combined with the good electrical properties of the resins make the molded parts attractive for applica-tions like the electrical apparatus (high voltage), transportation and automotive industries, infrastructures equipments.

Polyform Veil Mat PVM/600/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

7587 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

SKAPS M 0010 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

L900 is Multi-axial stitch felt. It is made of glass fiber untwisted roving laid in warp (0º), weft (90º) or diagonal (±45º) directions, or evenly spread glass chopped layers, stitched by polyester stitching threads. The weight is 200~2000g/㎡, and the width is 50~2600mm. Products are widely used in wind energy, boats, auto parts, construction engineering, medical equipment, sports and leisure and other fields.

Muehlmeier E-glass mat E-CSM- emulsion bonded consists of cut and non-oriented E-CR glass strands, which have silane size. The binding of the strands amongst each other happens by a liquid mat binder on PVAc base which is easily soluble in styrene. Working happens in the well known contact- and continuous processes. The mat is suitable for UP, EP and vinyl ester resins. Compared to E-glass E-CR glass has excellent resistance against chemical and thermal influences and also a higher dielectric strength.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

Glass Microspheres HGT25 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

Taishan Fiberglass EWR400, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.

Superior Huntingdon Composites M8615 is Continuous Filament Mat Designed for Matched Metal Die Molding.

ORCA CS MAT 1 OZ. X 13” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Jiangsu Changhai Composite Materials ROVING FOR PULTRUSION ER-4800-902 is compatible with polyester, vinyl ester, and epoxy resin systems. It is designed for use in the end products which require high mechanical properties. It can be used for FRP grid, FRP windows and doors, FRP tent supporting pole.