Products in Automotive: Reinforcement

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

For low viscosity PA6 & PA66 as well as rubber modified PA6 & PA66, applied in automobile, electric products, machine, etc. NPE free..

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

ORCA CS MAT 3 OZ. X 4” ROLL LB. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Carbon Fabrics 38491 (0.65 mm) is made of carbon fiber by 2/2 Twill weaving style.

7544 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

Owens Corning 985 multi-end roving represents a compelling solution for sheet molding compound applications (SMC) where complex decorative design and high impact resistance are required. Designed for SMC applications used in the building materials, consumer goods, and automotive markets. 985 multi-end roving represents a compelling solution for sheet molding compound applications where complex decorative design and high impact resistance are required. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with polyester and vinyl ester resin systems as well as some polyurethane resins.

3B Fiberglass CR 3037 consists of multiple continuous strands of smaller tex made from 3B E-CR glass wound onto a bobbin shape without mechanical twist and is free from static electricity generation.Choppable Roving CR3037 is silane sized and specifically designed to produce single or multi-layer fabrics for automobile, boat building, che-mical tanks. CR3037 is also recom-mended for continuous filament wind application to manufacture pipes and tanks.3037 conforms to BS 14020 and IS 11320.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

C-TAPE™ U300P 12K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 318 gsm. It is made using 12K HS carbon fiber. This carbon tape is used primarily for local reinforcement with epoxy resin. *FOE fiber available upon request

Angeloni Group GG 200 P is a carbon balanced fabric and is used in automotive, sport and leisure, light aircrafts.

PA high flow, high content of glass fiber reinforced mechanical properties. Applied in automobile, electric products and machine. PDA approval.

KEVLAR 29 FABRICS O95 is ballistic fabrics.

1144-02: Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

GRANOC YARN XN-60-60S used for industrial and sports application.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

125 U is a carbon Reinforcement.

Basaltex NV Multidirectional Fabrics 520 are laid in different orientations, layer-by-layer, and stitched together with a lightweight polyester yarn to form a fabric. Respect to woven fabrics, Non-Crimp (NC) fabrics offer better mechanical properties, primarily from the fact that the fibers are always straight and that more orientations of fiber are available from the increased number of layers of fabric. Due to the stitched nature of the multiaxial construction, the crimp effect associated with woven fabric is not present.

Basaltex NV Multidirectional Fabrics 720 QUADRI are laid in different orientations, layer-by-layer, and stitched together with a lightweight polyester yarn to form a fabric. Respect to woven fabrics, Non-Crimp (NC) fabrics offer better mechanical properties, primarily from the fact that the fibers are always straight and that more orientations of fiber are available from the increased number of layers of fabric. Due to the stitched nature of the multiaxial construction, the crimp effect associated with woven fabric is not present.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

SKAPS M 0020 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

From classical man-made fibers to man-made fibers on cellulose base to high performance fibers. Kevlar 220 dtex can be used custom-designed for BAFA®-laid scrims.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Angeloni Group CBX-600 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

BC 13 136 Basalt yarn is employed for the production of basalt fabrics tapes and cords.

Procotex CF-MLD180 is a mixture of all origin carbon and graphite ex-PAN fibers, obtained from pure carbon fibers, selected and milled for compounding. Its sizing, wich can vary is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints..; its compatibility needs to be checked on each new batch and for each new application.

ORCA CS MAT 0.75OZ X 50” ROLL LB. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

3B Fiberglass M8615 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

ORCA CS MAT 3 OZ. X 60” ROLL LB. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

CBX 200 is a carbon Reinforcement.

C-PLY™ SP 0/45 75/75 CT3,4 12K HS is a 150 gsm biaxial spread-tow carbon NCF, 0/+45°, 75 gsm/ply.It is made using 12K HS carbon fiber.The anisotropic orientation ensures that use of the material weight is optimized according to the direction of the forces exerted on the part to be made.

ACM C800P is a Unidirectional Woven Fabrics with Standard fabric width of 300 mm and Custom width range of 120—1600 mm having EP/VE Resin compatibility. Unidirectional carbon tapes are carbon fabric with at least 85% of the filaments arranged in the same direction. Thin glass, aramid, or hot melt fibers are used as weft (cross fibers). This structure supports the high tensile strength of the carbon tape and makes it a relevant material in demand for construction and many other applications.

Jiangsu Changhai Composite Materials Assembled roving for GMT 702 is designed for reinforcing modified PP.And it is a structural material,which is widely used in automotive,construction,packaging, electrical equipments industry and so on.

Style 220 is 3.22 oz. per square yard (109.18 g/m2) 4 harness satin (crowfoot) weave fiberglass fabric.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.