Products in Automotive: Tires

Zinc Oxide RAC by Brüggemann is a type of active zinc oxide that is produced through a special precipitation process. It is suitable for use in the vulcanization of a variety of rubber types, including:Natural rubber (NR)Styrene-butadiene rubber (SBR)Isoprene rubber (IR)Nitrile rubber (NBR)The product has excellent vulcanization properties due to its gentle thermal treatment and chemical origin. It is known for its high specific surface area, which enables it to provide excellent mechanical properties even when used in smaller amounts compared to traditional zinc oxides. Zinc Oxide RAC has a shelf life of 12 months.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps.

AL69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

Synthetic cis-butadiene rubber SIBUR BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene and filled with high aromatic oil

Synthetic styrene-butadiene rubber is obtained by emulsion copolymerisation of butadiene with styrene; filled with high aromatic petroleum oil and stabilized with staining antioxidant

Synthetic cis-butadiene rubber SIBUR BR-1245 is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.5. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Vaporlite® 90 (Uncoated) is the uncoated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

Styrene butadiene synthetic rubber SBR-1500 is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps; non-staining antioxidant

NR 73B2F is a chemical resistant lining rubber.The tensile strength, elongation, and abrasion resistance of natural rubber is excellent over a wide hardness rangeWith the exception of certain formulations of polybutadiene, it has the highest resilience of all rubbersNatural rubber is known for having good tear strength, fatigue resistance, and excellent compression setAll of these benefits make natural rubber the ideal choice for dynamic applications at low and ambient temperatures

Thanecure® T9 Superfine is the dimer of 2,4-toluene diisocyanate (TDI). It is a polyfunctional isocyanate used as a vulcanizing agent for specialty millable polyurethane rubbers, as a crosslinker for adhesives and as an adhesion promoter for rubber-to-fabric bonding.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Synthetic cis-butadiene rubber SIBUR BR-1243 Nd Grade B (LP) is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Rubber accelerator used to vulcanize "Viton®" fluoroelastomer and polyacrylate elastomers. Cross-linking agent in rubber processing; latent amine source in polyurethane production. Hexamethylenediamine carbamate for use as cross-linking agent in the vulcanization of vinylidene fluoride-hexafluoropropylene copolymer and vinylidene fluoride-hexafluoropropylene-tetrafluoroethylene copolymer elastomers.This product is produced in the USA at our plant in Dayton, TN.

RBR Clay belongs to 20 Microns' hard and soft clay range products which act as a reinforcing filler with huge techno-commercial benefits in rubber compounding formulation.

Styrene-butadiene synthetic rubber SSBR-2560 TDAE is the copolymerization product of 1,3-butadiene with styrene in hydrocarbon solvent in the presence of organolithium compounds and it is filled with TDAE oil and stabllized with staining antioxidant. The polymer contains по nitrosamines and substances that may become а source of nitrosamines.

Hyper MP 33 a speciality calcined clay developed by calcining the purest and processed Kaolin.

Polybutadiene rubber Synthetic cis-butadiene rubber BR-1243 Nd is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

NITRIFLEX® Styrene Butadiene Resin (SBR) S-6H by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is available in Powder form.

Synthetic styrene-butadiene rubber is obtained by low-temperature emulsion copolymerisation of butadiene with styrene and filled with petroleum-based softeners.

Synthetic rubber SBR-1502 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty

Zincamine (Zinc Dicyanatodiamine) is an activator for sulfur curing of EPDM and diene rubbers. Zinc(2+) bis(carbonylazanide) diamine; also provides activation for blowing agents.This product is produced in the USA at our plant in Dayton, TN.

Synthetic cis-butadiene functionalized rubber SIBUR BR-1243 E-Pro is the polymerization product of butadiene in solution in the presence of neodymium catalyst; 1,4-cis at least 97%; polydispersity not more 2.6. The polymer is stabilized by non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines. The product is characterized by improved processability.

Hyper 60 DV is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Millathane® 76M (Premilled) is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics and high strength and abrasion resistance properties.

Vaporlite® CTD (Coated) is a surface treated ultra fine sub-micron natural calcium carbonate. The submicron particles can act as spacers between TiO2 particles leading to an increase in the efficiency of TiO2 in the application.

VALEX™ Natural Rubber SGR-10 is commonly used as Polymer Compounding for a variety of applications.