Products in Automotive: Mold Release Agent

K - STOFF O is primary amides specially developed as mold release & slip additives for rubber application. In rubber application, these amide waxes also act as a processing aid and/or additive to improve the surface properties of both natural and synthetic rubbers such as NR, NBR, SBR, EPDM, CR, etc.

K - STOFF E is a refined vegetable origin bio-based dispersing agent to improve lubrication.

ST-PETS is a formulated lubricant, with long chain fatty acids such as stearic acid, also called pentaerythritol tetrastearate or simply PETS, which are a class of polymer additives with a strong release effect It can be used as processing additive surface modifier and a mold release agent in PC and other thermoplastics. It can improve the flowability, surface glossiness and reduce the friction factor.

Grillo-Werke AG Zinc Oxide Red Seal MH 10 is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

ULTRA-LUBE™ 200 is a processing additive for most rubber compounds. It shows outstanding performance as a dispersing aid for most fillers used in rubber compounding. In injection and transfer molding ULTRA-LUBET 200 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 200 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-LUBE™ 200 does not adversely interfere with most curing systems. Due to its low dosage level there is little or no effect on physical properties of the finished goods.

ULTRA-LUBE™ 230 shows outstanding performance as a dispersing aid for commonly used fillers in rubber compounding. In injection and transfer molding ULTRA-LUBE™ 230 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 230 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-™ 230 has a higher solubility limit than ULTRA-LUBE™ 200.

ULTRA-LUBE™ 888 is effective in improving flow properties of rubber compounds. The release effect of ULTRA-LUBE™ 888 is excellent during compounding and after curing as an internal mold release. ULTRA-LUBE™ 888 improves the dispersion of both carbon black and mineral fillers.

Moulex® 352 is internal mold release agent. It also acts as wetting agent.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

ULTRA-LUBET™ 160 is highly effective in improving flow properties of rubber compounds. This effect is based on a reduction of intermolecular friction and external friction against metal surfaces. ULTRA-LUBE™ 160 is outstanding during the compounding stage and after vulcanization as a mold release. Besides, it is highly effective as an internal release agent in preventing rubber compounds sticking to open mill rolls as well as to rotors in internal mixers. ULTRA-LUBE™ 160 has a stabilizing effect on the tendency of re-crystallization in CR compounds.

Qingdao Zhongsu PE Wax H-20 is a polymerized type.

Grillo-Werke AG Zinc Oxide Green Seal is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

MoldWiz® WB-GR50 - A water based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part. Will not interfere with any secondary operations such as decorating, bonding, or painting

MATER 53 EF is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

MATER 58 TH is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

Grillo-Werke AG Zinc Oxide G6 is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

MoldWiz® EM-606SFL - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

Grillo-Werke AG Zinc Oxide Red Seal is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

The extensive use of petroleum-derived polymers is responsible for the increasing concern about the environmental impact of plastics, since most of them are not biodegradable. Worldwide polymer production is estimated to increase: it is considered that in 2020 each person will consume around 40 kg of plastic annually. In this scenario, bioplastics emerge as an alternative to conventional plastics and among biopolymers VIBATAN® PLA BLACK N0381) is currently considered one of the most promising biopolyester at industrial scale, due to its good balance between physicochemical properties and sustainability.

Qingdao Zhongsu PE Wax H-100 is a polymerized type.

Qingdao Zhongsu PE Wax H-23 is a polymerized type.

MoldWiz® EM-1212 - A water-based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

Qingdao Zhongsu PE Wax PE-6A is a polymerized type.

Stoner, Inc. E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

Stoner, Inc. E204 Light Duty Silicone Release - FG is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It produces a very light, dry mist coating which reduces over-application and buildup on molds.

Grillo-Werke AG Zinc Oxide 2011 is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

Stoner, Inc. A324 Rapid Release is specially formulated to release molded silicone rubber, thermoset plastics, rubber, and similar materials.

RP 06 - RP 06 Odor modifiedRP 11 General purposeRP 23 When PE is presentRP 38 High efficiency when PE is presentVMO Series Low Odor

Moulex® TPR is a semi-permanent water based release agent. It possesses high adhesivness on molds.

MoldWiz® EM-1212SF2 - A water-based external release agent with anti-rusting properties that dries at room temperature forming a monomolecular film which adheres by absorption to the mold walls and has no affinity for the resin or rubber. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

Moulex® 154 NS is internal mold release agent. It improves external release agent performances.

Qingdao Zhongsu PE Wax H-24 is a polymerized type.

MATER 55 EHD is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

XTEND® 19RBU - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.