Products in Fuel Systems: Polyurethanes (PU)

Miracll Chemicals E 90 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

Miracll Chemicals E 70 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Essentium’s TPU 95A Low Friction is the medium durometer filament in our broad flexible portfolio. It balances high elongation with impressive impact resistance and tensile strength. This filament has a low friction surface that allows for easier feeding while printing.

Miracll Chemicals E 155D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Intec Foams Sealtec PU Foam is a type of foam consisting of polyether and polyester grade foam particular suited for low compression seals, used mainly in the automotive industry. It replaces EPDM foam where weight saving is a factor. Sealtec foam only needs around 60% compression to be effective.

Miracll Chemicals E 175D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Henan Anglxxon Chemical Thermoplastic polyurethane resin ALX-P501 is used in fire hose resin is a thermoplastic polyurethane elastomer, TPU, nylon, chemical fiber fabrics, tarpaulins and other materials have an excellent bonding effect. It is sesistant to yellowing.

ISOTHANE 1065A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Miracll Chemicals E 195 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Miracll Chemicals E 85 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Miracll Chemicals E 95 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Tygothane C-210-A is a Polyurethane (Polyester based) (PUR-Ester) product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Chemical Resistant Clarity Good Flexibility Good Tear Strength Wear Resistant

ISOTHANE 1085A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

AFT Fluorotec AF1008 U203-D57G is a hydrolysis resistant PU (H-PU) composed of prepolymers based on polyoxytetrametylene glycol (PTMEG) and diphenylmethane diisocyanate (MDI) processed liquid with catalysts and a MoS2 polyol. The hardness is adjusted at 57 +/-2 Shore D which makes it an excellent extrusion resistant material. This special MoS2 composition performs excellent in critical lubrication situations and reducing the stick-slip behavior.

Henan Anglxxon Chemical Thermoplastic polyurethane resin ALX-A is used in adhesive is a solvent-soluble thermoplastic elastomer, in esters, ketones, DMF, dichloromethane and other solvents have good solubility.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Miracll Chemicals E 190 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

ISOTHANE 1075A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Miracll Chemicals E 180 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

ISOTHANE 1070A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

Sylvin™ 9467-65 Black is a vinyl / polyurethane compound formulated for injection molded valves for spray can applications.

Miracll Chemicals E 185 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Miracll Chemicals E 80 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

AFT Fluorotec AF1007 U203-D57 is a hydrolysis resistant PU (H-PU) composed of prepolymers based on polyoxytetrametylene glycol (PTMEG) and diphenylmethane diisocyanate (MDI). The hardness is adjusted at 57 +/-2 Shore D which makes it an excellent extrusion resistant material. The resistance to most common hydraulic fluids and oil water emulsions makes it a very universal material for seal applications.

ISOTHANE 1090A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

This product is a polyurethane system. "VP"-products are experimental products. Regarding technical data slight modifications are possible.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.