Products in Other Automotive Applications: Gears

Stanyl® TW200B6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.

Stanyl® TW200F6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.

GLAMIDE® T-656E is a Polyamide 66 (Nylon 66) product. It is available in North America.Characteristics include: Flame Rated Wear Resistant

PA 6 reinforced with glass fiber, heat stabilized

This polyamide from caprolactam and laurolactam produced in the free-casting process shows in comparison to pure LiNNOTAM has a higher impact and shock resistance as well as a lower tendency to absorb moisture. In addition, the material is characterized by improved creep behavior and higher elasticity.

Titacon® GF930 is a 30％GLASS FIBER REINFORCED, HIGH STRENGTH/STIFFNESS, DIMENSIONAL ACCURACY.

Solver Polyimide Polyimide Resin Composite 15% Molybdenum Disulfide can be used for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, scientific instrument, industrial machinery, production equipment and so on. The polyimide is fit for the application surroundings which can be temperature resisting, sealed, dimensional stability, deformation without fracture, such as sealing ring, thrust washer sliding bearing, vacuum pump vane, valve seat gear and so on.

Semi-crystalline high-performance plastic with targeted improved sliding properties through the addition of solid lubricants. The excellent Properties of pure PEEK are enhanced by the Additives are not adversely affected and remain Receive.

Pentamid A GV30 H black is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

Pentamid B GV30 H2 RC S black is a normal viscosity, highly heat stabilized polyamide 6, 30% glass fiber reinforced, recompound.

PA 6 reinforced with glass fiber, improved impact strength

Titacon® GF520 20％GLASS FIBER REINFORCED, HIGH STRENGTH/STIFFNESS, HOMO-POLYACETAL.

Solver Polyimide Polyimide Resin Composite 15PTFE can be ued for aircraft, aviation, automobile, office equipment, electrical and electronic equipment, sciencific instrument, industrial machinery production equipment and so on. The polyimide is fit fo the application surroundings which can be temperature resisting, sealed, dimensional stability, deformatio without fracture, such as seeling ring, thrust washer sliding bearing, vacuum pump vane, valve seat, gear and so on.

Polimersan Plastics Polipa (PA 6) is one of the most preferred Polymer due to resistance to bending and wearing, perfect performance balance and low cost.

POM-CF10, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

Nylene Duratel MF9 is an unreinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 issuitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

Titacon® SI902 is a 2％SILICONE FILLED, LOW FRICTION, MEDIUM FLOW.

Pentamid AB GV60 H natural is a normal viscosity, heat stabilized polyamide 66+6, 60% glass fiber reinforced.

Titacon® TF920 is a 20％PTFE POWDER FILLED, WEAR RESISTANCE.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

RGR20 is a Nylon 66 Glass Reinforced 20%.

Pentamid A GV20 GK10 E H natural is a normal viscosity,impact modified polyamide 66, 30% glass fiber and bead reinforced, heat stabilized.

Engineering Grade Nylon Resin (PA66)

Ziamid® B is already used in the automotive, E&E, construction and consumer goods industry, the recyclates / ZIA compounds from MKV offer a real alternative to virgin material.

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

Glass Fiber Reinforced, Engineering Grade Nylon Resin (PA6)

PA 6 reinforced with glass fiber, improved impact strength

Pentamid A GV35 H RC black is a normal viscosity, heat stabilized polyamide 66, 35% glass fiber reinforced, recompound.

Titacon® TX940 is a HIGH IMPACT, TOUGHNESS, HIGH ELASTOMER FILLED.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

PA 66 reinforced with glass fiber, heat stabilized

Pentamid AB GV15 E H natural is a normal viscosity, heat stabilized polyamide 66+6, 15% glass fiber reinforced, impact modified.

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

GEHR PBT® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

Pentamid B GV60 H natural is a normal viscosity, heat stabilized polyamide 6, 60% glass fiber reinforced.