Products in Powertrain & UTH: Polyethylene Terephthalate (PET)

Ertalyte® TX Polyethylene Terephthalate Polyester PET is an unreinforced, semi-crystalline grade that offers superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance, and great chemical and abrasion resistance. This grade is designed to withstand high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.Features:Superior dimensional stabilityExcellent wear resistanceLow coefficient of frictionHigh strength and rigidityOutstanding stain resistanceGreat chemical and abrasion resistanceBenefits:Withstands high pressure and velocity conditionsLow moisture absorption rate ensures mechanical and electrical properties are unaffected by moistureLow wear rate compared to unmodified polyestersIdeal for use in environments with soft metal and plastic mating surfaces where noise abatement is criticalApplications:High pressure and velocity applicationsFood processing and packagingPharmaceuticalOil and gas industriesMechanical precision parts that must endure high loads and wear conditions.

MultiPet C-03 from one way bottles, post consumer.

Manifattura Cattaneo PET + PTFEis a polyethylene terephthalate modified in the structure by the incorporation of dispersed PTFE. This specific formulation exhibits extraordinary self-lubricating properties, in addition to having excellent wear resistance, it offers a better coefficient of friction.

VYPET™ VNT-840 is a 40% glass/mineral reinforced PET injection molding compound especially designed for electrical applications where equal flow / cross dielectric properties are required.

MultiPet O-02 from one way bottles, post consumer.

MultiPet C-04 from one way bottles, post consumer.

HiMax™ 8gsm DPA (Dot Pattern Adhesive) products are designed to help composite manufacturers maintain the desired position of the reinforcement prior to resin introduction, particularly in closed mold processes such as vacuum infusion and resin transfer molding. HiMax™ DPA was developed to provide the optimal level of tack while keeping additional weight to a minimum. Using DPA in conjunction with HiMax™ fabrics allows the user to easily position and re-position the individual layers of their laminate stack before resin is introduced. Conformance to tight radii and complex mold geometry is also aided by DPA.

Semi-crystalline thermoplastic with high Hardness, rigidity and mechanical strength as well good creep resistance. By adding a it has a special, homogeneously distributed solid lubricant, compared to pure PET, improved sliding properties and higher abrasion resistance.

TKG® ETL (PET + SOLID LUBRICANT) is a relatively new semi-crystalline polymer created for technical uses. It is suitable for mechanical parts that require dimensional stability and a low coefficient of friction.

VYPET™ VNT-835 is a 35% Mineral and Glass Fiber reinforced PET injection molding compound designed for structural applications.

MultiPet C-01 from refillable bottles, post consumer.

Semi-crystalline thermoplastic with high Hardness, rigidity and mechanical strength as well good creep resistance. PET has very good ones Sliding properties and shows little sliding wear. Also for parts due to its good dimensional stability good with high demands on dimensional accuracy suitable.

GEHR PET® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

TKG® ET (PET) is a relatively new semi-crystalline polymer created for technical uses. It is suitable for mechanical parts that require dimensional stability and a low coefficient of friction.

VYPET™ VNT 340 SK is a 40% glass/mineral reinforced PET injection molding compound especially designed for electrical applications where equal flow / cross dielectric properties are required.

MultiPet B-02 from one way bottles, post consumer.

HiMax™ 3gsm DPA (Dot Pattern Adhesive) products are designed to help composite manufacturers maintain the desired position of the reinforcement prior to resin introduction, particularly in closed mold processes such as vacuum infusion and resin transfer molding. HiMax™ DPA was developed to provide the optimal level of tack while keeping additional weight to a minimum. The novel application process allows just 3 grams per m2 of adhesive to be applied to the specified fabric. Using DPA in conjunction with HiMax™ fabrics allows the user to easily position and re-position the individual layers of their laminate stack before resin is introduced. Conformance to tight radii and complex mold geometry is also aided by DPA.

MultiPet C-02 from one way bottles, post consumer.