Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Automotive & Transportation
Automotive
Powertrain & UTH
Products in Powertrain & UTH: Polyethylenes
28 Products found in Powertrain & UTH
Filters
Product Families
Suppliers
End Uses
Functions
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Color:
Green
Physical Form:
Plates
TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
SABIC's Specialties Business
LNP™ STAT-KON™ Compound FX98501
Polymer Name:
Polyethylene (unspecified)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer
Fillers Included:
Carbon Powder, Glass Fiber, Carbon Black
SABIC's Specialties Business LNP STAT-KON FX98501 compound is based on Polyethylene (PE) resin containing conductive carbon powder and glass fiber. Added features of this grade include: Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Electric Cable Compounds
AquaGraft® 1-5150
Applications:
Jacketing & Insulation, Data Communication Cables, Consumer Electronics
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Welding Cable
AquaGraft® 1-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
Hyundai EP
PLASTOMER® 1075B/N
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.
Hyundai EP
PLASMER® 2055B/N
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 2055B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 2055B/N can be reused without scrap during processing.
Hyundai EP
PLASMER® 1035BM/NM
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1035BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1035BM/NM is a fully crosslinked product and can be reused without scrap during processing.
Hyundai EP
PLASMER® 1045BM/NM
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.
Hyundai EP
PLASMER® 1050DB/DN
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1050DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1050DB/DN is a fully crosslinked product and can be reused without scrap during processing.
Hyundai EP
PLASMER® 1065BM/NM
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1065BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1065BM/NM is a fully crosslinked product and can be reused without scrap during processing.
Bell Plastics
Bell Plastics Ultra XLPE Film
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Physical Form:
Film, Sheets
Features:
Chemical Resistant, UV Resistant, Cost Effective, Good Adhesion, Long Shelf Life, Low Temperature Flexibility, Abrasion Resistant, Smooth Surface Finish, Low Friction
Color:
Black, Natural
Bell Plastics Ultra XLPE Film is a new and innovative film that offers many of the advantages of UHMWPE films as well as the added benefit of being able to produce much wider sheets, all at a significant cost savings. Bell Plastics Ultra XLPE Film has excellent abrasion and chemical resistance and is ideal for applications such as hose covers and abrasion resistant industrial products.
Hyundai EP
PLASTOMER® 1080B/N
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASTOMER® 1080B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1080B/N is a fully crosslinked product and can be reused without scrap during processing.
C.B.Frost & Co.
Plastazote® LD45
Foam Type:
Closed Cell Foam
Chemical Family:
Polyethylenes, Polyolefins
End Uses:
Gaskets
Plastazote® LD45 is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process.
Saint-Gobain
Chemfluor™ UHMW Polyethylene Flim
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:
Film
Features:
Good Environmental Stress Crack Resistance (ESCR), Food Contact Acceptable, High Molecular Weight, Chemical Resistant, Self Lubricating, Impact Resistance, Abrasion Resistant, Low Friction
Chemfluor UHMW Polyethylene Flim is an Ultra High Molecular Weight Polyethylene product. It is available in North America. Applications of Chemfluor UHMW Polyethylene Flim include bags/liners, engineering/industrial parts and food contact applications.Characteristics include: Chemical Resistant High ESCR (Stress Crack Resistant) Impact Resistant Wear Resistant
Hyundai EP
PLASMER® 1370B/N
Applications:
Lighting, Exterior & Body, Jacketing & Insulation
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1370B/N is a flame retardant grade that can be widely used in automobiles and electrical/electronic parts. PLASMER ® 1370B/N is a fully crosslinked product and can be reused without scrap during processing.
Manifattura Cattaneo
Manifattura Cattaneo PE HD
Polymer Name:
High Density Polyethylene (HDPE)
Physical Form:
Rods, Sheets, Bars
Features:
Chemical Resistant, Water Resistant, Low Water Absorption, Odorless, Good Electrical Properties
Density:
2140.0 - 2160.0 kg/m³
Tensile Modulus:
1300.0 - 1300.0 MPa
Color:
Green, Black, Natural
Manifattura Cattaneo PE HD material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.
Hyundai EP
PLASMER® 1040DB/DN
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1040DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1040DB/DN is a fully crosslinked product and can be reused without scrap during processing.
PBY Plastics
PBY Plastics PB71000C
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Compression Molding
PBY Plastics PB71000C is a compression molded virgin Ultra High Molecular Weight PolyEthylene (UHMWPE).
Hyundai EP
PLASMER® 1025BM/NM
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1025BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1025BM/NM is a fully crosslinked product and can be reused without scrap during processing.
Hyundai EP
PLASMER® 2065B/N
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 2065B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASTOMER ® 2065B/N can be reused without scrap during processing.
Hyundai EP
PLASMER® 1055BM/NM
Applications:
Other Building & Construction Applications, Lighting, Jacketing & Insulation
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Appliances
PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.
Manifattura Cattaneo
Manifattura Cattaneo PE UMW
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:
Rods, Sheets, Tube
Features:
Chemical Resistant, Water Resistant, Low Water Absorption, Odorless, Good Electrical Properties, Low Density
Tensile Modulus:
900.0 - 900.0 MPa
Color:
Natural
Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.
C.B.Frost & Co.
Plastazote® LD24
Foam Type:
Closed Cell Foam
Chemical Family:
Polyethylenes, Polyolefins
End Uses:
Gaskets
Plastazote® LD24 is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process.
Hyundai EP
PLASMER® 1380B/N
Applications:
Lighting, Exterior & Body, Jacketing & Insulation
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASMER® 1380B/N is a flame retardant grade that can be widely used in automobiles and electrical/electronic parts. PLASTOMER ® 1380B/N is a fully crosslinked product and can be reused without scrap during processing.
Hyundai EP
PLASTOMER® 1070B/N
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASTOMER® 1070B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASTOMER ® 1070B/N is a fully crosslinked product and can be reused without scrap during processing.
Polyplastics Group
Duracon® NW-02
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1360.0 - 1360.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
52.0 - 52.0 MPa
Polyplastics Group Duracon® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Licharz
Licharz PE-UHMW 1000
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Physical Form:
Plates, Tube, Bars
Features:
Wear Resistant, Chemical Resistant, Excellent Toughness, Vibration Damping, Semi Crystalline
Density:
940.0 - 940.0 kg/m³
Color:
Green, Black, Natural
Partly crystalline thermoplastic material with high toughness and chemical resistance, but lower compared to other plastics mechanical strength. Because of its high molar mass of approx. 4,500,000 g / mol is very good Wear resistance and vibration damping.
Silon
TABOCAB® SXI 006
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Density:
925.0 - 925.0 kg/m³
Tensile Strength:
20.0 - 20.0 MPa
The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.
Hyundai EP
PLASTOMER® 1090B/N
Applications:
Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:
Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
Ethylene-based Elastomer (POE)
End Uses:
Housings, Automotive Interior Parts, Automotive Exterior Parts
PLASTOMER® 1090B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1090B/N is a fully crosslinked product and can be reused without scrap during processing.