Products in Powertrain & UTH: Cables

SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.

SABIC's Specialties Business CYCOLOY CX7240 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated flame retardant grade. It has a UL94 V0@.75mm, 5VA@3.0mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.

SABIC's Specialties Business ULTEM™ Resin 2120 is a high-flow, 10% glass fiber-reinforced polyetherimide resin. This material is RoHS compliant, intrinsically flame retardant without the use of FR modifiers, and offers UL94 V0 at over 0.5 mm. It offers excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This material is opaque and can be custom colored. SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which are available through differentiated color nomenclature.

20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C).

SABIC's Specialties Business ULTEM™ Resin 2220 is a high-flow resin with a 20% glass fiber reinforcement made from polyetherimide. This material is RoHS compliant and inherently flame retardant, without the need for any flame retardant additives, and offers a UL94 V0 rating at over 0.5 mm. It provides excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This opaque material can be custom colored, and SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which can be identified by differentiated color nomenclature.

SABIC's Specialties Business ULTEM™ Resin 1010R is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg of 217°C), improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS compliant. The material is available in opaque colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business ULTEM™ Resin 2210R is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 2320 is a high-flow, 30% glass fiber-reinforced polyetherimide resin. This material is RoHS compliant, is intrinsically flame retardant without the use of FR modifiers, and offers UL94 V0 at more than 0.5 mm. This material offers excellent dimension stability, strength, stiffness, and creep resistance up to high temperatures due to its high glass transition temperature of 217°C. This material is opaque and can be custom colored. SABIC's ISCC+-certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

LNP LUBRICOMP RFL36XXY compound is based on Nylon 6/6 resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business FLEX NORYL WCV063 resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and carries UL VW-1 and UL94 V0 ratings along with a Shore D Hardness reading of 63. FLEX NORYL WCV063 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra thin-wall capability, Good scratch abrasion and pinch resistance, High dimensional stability, low shrinkage and warpage, Very low water absorption, chemical resistance, and good dieletrcic strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

Transparent, high flow polyetherimide.

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business NORYL™ N190 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N190 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *This grade is also referred to as NORYL™ N1900 in several regions.

SABIC's Specialties Business NORYL™ N1900 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N1900 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *this grade is also referred to as NORYL™ N190 in several regions.

Aegis® H85WC01 resin is a medium-high viscosity, heat stabilized, nylon 6 jacket compound for use in wire, cable, flexible lighting and plenum applications. It provides excellent performance across the range of THHN, THWN and TFFN constructions along with a well-balanced set of properties, including low fuming, high toughness, abrasion resistance, and excellent resistance to gasoline, oil and other hydrocarbons.

Aegis® H55WC01 is a medium viscosity, heat stabilized, nylon 6 universal wire jacket compound providing excellent performance across the range of THHN, THWN and TFFN constructions. It also offers a well-balanced set of properties including flexibility, toughness, abrasion resistance and excellent resistance to gasoline, oil and other hydrocarbons. Aegis® H55WC01 nylon compound has been investigated in accordance with the test methods outlined in ANSI/UL 1581 and ANSI/UL 83 and is certified under UL QMTT2 for use in wire, cable and flexible lighting products.

Aegis® H55WCX resin is a medium-viscosity, heat stabilized, nylon 6 universal wire jacket compound that provides excellent performance across a range of THHN, THWN and TFFN constructions. It offers well-balanced features including flexibility, toughness, abrasion resistance, and superior resistance to gasoline, oil and other hydrocarbons.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AquaGraft® 61-7125 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Excelene 5000 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

AquaGraft® 16-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Excelene 5002 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

AquaGraft® 4-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® 1-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

AquaGraft® 2-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Neoflon ETFE EP-610, available in pellet and solid forms, stands out with features such as excellent flexibility, good electrical properties, and a low melting point. Its applications span across automotive, consumer goods, electrical and electronics, and printing and packaging, finding use in aerospace, appliances, automotive electronics, and wire and cable insulation. With processing methods covering extrusion and injection molding, it offers versatility in various end uses.

NBR 2675 is essentially an acrylonitrile (27-30%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

Neoflon FEP NP-30, in solid form, stands out with features such as chemical resistance, good electrical properties, and high-temperature strength. Targeting markets in automotive, electrical, and electronics, it finds application in cables, coaxial cable insulation, plenum cable insulation, tubes, and wires. With extrusion as its processing method, it offers a specialized solution for specific end uses.

Neoflon ETFE EP-610AS, in black pellet and solid forms, combines excellent flexibility, good adhesion, and a low melting point. Targeting automotive and electrical and electronics markets, it caters to applications like automotive fuel lines, cables, connectors, and semiconductor applications. With processing methods including extrusion and injection molding, it offers a specialized solution with a distinctive appearance.

Neoflon ETFE EP-521, in pellet and solid forms, boasts features like chemical resistance, excellent melt flow, good electrical properties, and low specific gravity. Targeting markets in automotive, consumer goods, electrical and electronics, and printing and packaging, it finds applications in aerospace, appliances, automotive electronics, and wire and cable insulation. With processing methods covering extrusion and injection molding, it caters to a diverse range of end uses.

Neoflon FEP NP-20, in solid form, shares features like chemical resistance, good electrical properties, and high-temperature strength with NP-101. Targeting markets in automotive, electrical, and electronics, it finds application in cables, coaxial cable insulation, film, and tubes. With processing methods including extrusion and film extrusion, it provides a reliable solution for various end uses.

NBR 4045 is essentially an acrylonitrile (36-40%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. High content of acrylonitrile, very high oil resistance.