Products in Bonding & Assembly: Polyamides

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

UNI-REZ 2228 polyamide resin is a high viscosity, alcohol soluble type resin for use in flexographic printing. Its high molecular weight and fast solvent release makes it ideal for high speed printing and when high chemical and/or abrasion resistance properties are desired.

Anhui I-Sourcing International Hot Melt Polyamide Adhesive is an amber adhesive.

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

LOXIAMID PA6 HS1 IM3 03039 is an injection molding grade of Polyamide 6 resin with excellent impact resistance.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

PA 66 basic type

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Anhui I-Sourcing International polyamide hot melt adhesive powder is an amber adhesive powder.

High Impact Nylon Resin (PA66)

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

LOXIAMID PA6 HS1 03001 is an injection molding grade of Polyamide 6 resin.

Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

PA 66 flame retarded

UNI-REZ 2671 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2671 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

Nylene Low wear 30% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced - Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

CP-Polymer Technik Wellamid® 22LHI4 XE-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® 22LHI4 XE-N are: Impact Modified Impact Resistant Typical application of Wellamid® 22LHI4 XE-N: Automotive

Nylene Toughened, heat-stabilized nylon 6/6 Exhibits an improved impact resistance and flexibility over unmodified nylons Retains the excellent chemical and heat resistance typical of all nylon products Suitable for applications such as clips, fasteners, safety restraint parts, and other parts with snap fit or clip features

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

GRODNAMID PA6-GF20 M10 is glass filled polymer composite material.

CP-Polymer Technik Wellamid® 22LN2-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® 22LN2-N: Flame Rated.Typical application of Wellamid® 22LN2-N: Automotive

Impact Modified Nylon Resin (PA66)

Shakespeare® terpolymer series are linear polyamide grades with unique solubility characteristics and physical properties. They are compatible with other nylons and are ideal nylon carrier resins for color and functional additives requiring excellent dispersion and high loading. The resins offer improved adhesion to glass and metal surfaces. Selected grades are soluble in alcohol and can be applied by solution coating techniques.

Nylene Designed for very fast cycle time molding and parts requiring high flow rates, such as long thin parts or high cavitation tools Low viscosity nylon 6 with special nucleation for rapid part set-up and special flow enhancers to aid in molding Excellent choice for parts such as wire ties, clips, fasteners, bushings and bearings

Nylene General purpose injection molding resin. Lubricated and nucleated for faster cycle times Suitable for applications such as clips & fasteners, bushings & rollers, and other general purpose uses

Nylene Medium-impact modified nylon for fast, easy molding Parts molded from 721 have good impact strength right out of the mold without post conditioning Suitable for applications such as clips, fasteners, and other parts where some initial flexibility and impact resistance is desired Cylinder temperatures should be in the 450°F-500°F range.

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 2672 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2672 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

UNI-REZ™ thermoplastic polyamide adhesives resins bond to a variety of substrates. Kraton’s leading technology position enables a tailored combination of strength, flexibility, environmental resistances, adhesion and open times.

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

UNI-REZ 1533 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 1533 polyamide resin provides fast solvent release, good gel resistance, and excellent grease resistance in flexographic / gravure inks for plastic substrates.