Products in Bonding & Assembly: Appliances

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

POM copolymer unreinforced, medium viscosity

PBT-GF30, PBT, 30% glass fiber reinforced

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

PBT unreinforced, highly impact modified

PBT + PCT, unreinforced, increased heat resistance, impact modified

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT-GF15, PBT, 15% glass fiber reinforced

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

CP-Polymer Technik Wellamid® 22LN2-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® 22LN2-N: Flame Rated.Typical application of Wellamid® 22LN2-N: Automotive

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant, hydrolysis stabilized

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

PBT, 20% glass fiber reinforced, flame retardant (V0 at 0.8 mm; halogen free), hydrolysis-resistant

PBT unreinforced, injection molding type, low viscosity

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

Polyfill Technologies Elastofill Compound PT-EF05 is plastomeric material based on the specialty polymer blends with the unique characteristics. The product is highly compatible with LD, LLDPE and PP. It enhances the softness, elongation at break, elasticity and impact resistance of the film. Besides it also improves the transparency in the films. It also enhances the thermal bonding strength.

PBT + PET, 30% glass fiber reinforced, suitable for contact with food (EU)

KEBABLEND / TC FE 181003 PBT is a special compound based on PBT, which is thermally conductive and electrically insulating.

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

PBT-M40, PBT, 40% mineral

Engineering Grade Nylon Resin (PA66)

PBT unreinforced, flame retardant

PBT + PET, 30% glass fiber reinforced gray, suitable for contact with food (EU)

POM copolymer unreinforced, medium viscosity, UV stabilized

PBT-GF20, PBT, 20% glass fiber reinforced