Products in Bonding & Assembly: Automotive Applications

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

PA 66 basic type

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

CP-Polymer Technik Wellamid® 22LHI4 XE-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® 22LHI4 XE-N are: Impact Modified Impact Resistant Typical application of Wellamid® 22LHI4 XE-N: Automotive

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

High Impact Nylon Resin (PA66)

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

KEBABLEND / TC FE 181003 PBT is a special compound based on PBT, which is thermally conductive and electrically insulating.

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PA 66 flame retarded

PBT + PET, 30% glass fiber reinforced, suitable for contact with food (EU)

Polyfill Technologies Elastofill Compound PT-EF05 is plastomeric material based on the specialty polymer blends with the unique characteristics. The product is highly compatible with LD, LLDPE and PP. It enhances the softness, elongation at break, elasticity and impact resistance of the film. Besides it also improves the transparency in the films. It also enhances the thermal bonding strength.

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

PBT-GF30, PBT, 30% glass fiber reinforced

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

PBT unreinforced, injection molding type, low viscosity

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

PBT, 20% glass fiber reinforced, flame retardant (V0 at 0.8 mm; halogen free), hydrolysis-resistant

Impact Modified Nylon Resin (PA66)

CP-Polymer Technik Wellamid® 22LN2-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® 22LN2-N: Flame Rated.Typical application of Wellamid® 22LN2-N: Automotive

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT + PCT, unreinforced, increased heat resistance, impact modified

PBT-GF15, PBT, 15% glass fiber reinforced

PBT unreinforced, highly impact modified

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant, hydrolysis stabilized

POM copolymer unreinforced, medium viscosity

Engineering Grade Nylon Resin (PA66)