Products in Bonding & Assembly: Sporting Goods

PA 66 flame retarded

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

CP-Polymer Technik Wellamid® GFT33N051-N2 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America.Important attributes of Wellamid® GFT33N051-N2 are: Heat Stabilizer Impact Modified

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

PBT + PCT, unreinforced, increased heat resistance, impact modified

PBT unreinforced, injection molding type, low viscosity

PBT unreinforced, highly impact modified

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

POM copolymer unreinforced, medium viscosity, UV stabilized

PBT unreinforced, injection molding type, approved for use in contact with food

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

PA 66 flame retarded