Products in Other Bonding & Assembly Applications: Industrial Applic...

PBT unreinforced, highly impact modified

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

PBT + PCT, unreinforced, increased heat resistance, impact modified

PBT unreinforced, injection molding type, low viscosity

POM copolymer unreinforced, medium viscosity

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PBT unreinforced, flame retardant

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

POM copolymer unreinforced, medium viscosity, UV stabilized

PBT unreinforced, injection molding type, approved for use in contact with food

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.