Products in Coatings & Finishes: Polyvinyl Chloride (PVC)

DCL 1372 DPP Flame Red, PR.272 is a bright, opaque, slightly yellow shade red pigment that stands out as an offset to the industry standard. It boasts excellent overall properties. This pigment finds major applications in the following: Plastics such as PVC, PE and PP Automotive/aerospace, industrial, powder coatings Water flexo, solvent flexo and inkjet inks

DCL 1222 Quinacridone Magenta, PR.122 (Yellow shade), is a high-performance pigment that retains all the typical properties of quinacridone pigments, while offering a more yellowish and brighter masstone and a noticeably yellower, brighter, and stronger tint compared to the 1229 grade.

DCL 3136 Phthalocyanine Green, PG.36 is a strong, yellow-shaded, fully brominated phthalocyanine green pigment of excellent value, tinting strength, and color purity. 3136 has excellent overall properties. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL Y933 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment, mainly used in plastics and coatings. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. The applications of this product are restricted to industrial and professional inks, coatings, plastics and roadmarking applications (subject to regional legislation).

DCL 301 Chromium Oxide Green, PG.17 (light shade, G4099 type) is a high-quality, clean, yellow-shade, very-stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL 1970-A Naphthol Red, PR.170 is a bright, blue-shaded naphthol red with good overall properties. It has a wide range of applications, including in plastics such as PVC and PE, as well as decorative, powder, and industrial coatings. It is also used in solvent flexo, inkjet, offset, and UV inks.

DCL 2443 Vat Orange, PO.43 is a bright, high-chroma orange pigment with excellent overall properties and high tint strength, suitable for nearly all types of coatings and plastics applications. It can be used to formulate pastel colors and for shading as well as creating copper metallic shades; however, full shade applications may have a tendency to darken upon exposure.

DCL 5020 Medium Yellow, PY.34 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance medium shade yellow pigment with stir-in properties and is recommended for high-end decorative, automotive, aerospace, industrial, and powder coatings along with plastic applications.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL KY881 Lemon Yellow, PY.34 is a silica-encapsulated lemon chrome-yellow pigment with superior heat and chemical resistance for high-end industrial coating and plastic applications. It also exhibits good overall lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of applications.

DCL 305 Chromium Oxide Green, PG.17 (medium shade, G6099 type) is a high-quality, clean, medium shade, very stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL 1233 Carbazole Violet, PV.23 is a high-performance pigment with a bluish-violet color and high tint strength. It exhibits excellent fastness to light and weathering in most applications and is only slightly affected by reductions with titanium dioxide.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 5610 Molybdate Orange, PR.104 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance yellow shade moly orange pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics and roadmarking (subject to regional legislation).

DCL 5606 Molybdate Orange, PR.104 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance blue shade moly orange pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics and roadmarking (subject to regional legislation).

DCL 1229 Quinacridone Magenta, PR.122 (Blue shade) is a standard magenta shade PR 122 that exhibits all the typical properties of quinacridone pigments. It is a low-warpage pigment, recommended for plastics, coatings, and inks, and finds a wide range of applications in coatings, such as trade sales, automotive, agricultural equipment, architectural paints, and industrial finishes. Its excellent heat stability and exterior durability make it suitable for use in various polymeric resin systems, such as polyolefins, polystyrene, polycarbonate, and ABS.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL 1003 Medium Yellow, PY.34 is a standard medium chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1836 Azo Orange, PO.36 is an opaque grade of PO.36 that exhibits a reddish-shaded orange color with excellent light and weather fastness characteristics. 1836 provides high opacity and good flow properties in a variety of plastics, coatings, and inks.

DCL 1610 Molybdate Orange, PR.104 (stir in), is a pre-darken yellow shade molybdate orange pigment with stir-in properties used in plastic and coating applications where excellent weather fastness is required. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1606 Molybdate Orange, PR.104 (stir in) is a pre-darken blue shade molybdate orange pigment with stir in properties used in plastic and coating applications where excellent weather fastness properties are required. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 1036 Lemon Yellow, PY.34 (stir in) is a standard lemon chrome yellow pigment with stir-in properties used in plastic and coating. The applications of this product are estricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 1032 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1001 Medium Yellow, PY.34 is a standard medium chrome yellow pigments used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1013 Medium Yellow, PY.34 is standard medium chrome yellow pigment used mainly for plastic and coating applications. It has good overall resistance properties. This pigment finds major applications in the following: Plastics such as PVC, PP and PE. Automotive/aerospace, powder and industrial coatings.

DCL 1014 Medium Yellow, PY.34 is a standard medium chrome yellow pigment. This pigment is recommended to be used for plastics such as polyvinyl chloride(PVC), polyethylene (PE) and polypropylene (PP), along with automotive, aerospace, industrial, and powder coating applications.

AFCONA 2720 is an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, epoxies and PVC-compounds. It supports the quick deaeration of thermosetting resin systems, allowing for the production of foam-free and blister-free self-leveling compounds and laminates. Additionally, AFCONA 2720 is suitable for use in can and coil coatings, where it is less likely to cause side effects such as inconsistent craters in the line.

AFCONA 5207 is a very economical dispersant with good pigment stabilizing performance. It functions as a wetting and dispersing additive for solvent-based architectural and decorative paints, also a very suitable dispersant for printing ink. It will stabilize most of the pigments that are commonly used in these systems.

Dar-Tech Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties such as extreme toughness, abrasion resistance, and mar resistance. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood.

DCL 1012 Medium Yellow, PY.34 (stir in) is a standard medium chrome yellow pigment with stir-in properties used in plastics and coatings. The applications of this product are estricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 1019 Medium Yellow, PY.34 is a pre-darkened standard medium chrome yellow pigment used in plastic and coating applications where excellent weatherefastness is required. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

Dar-Tech Hauthane HD-2125 DMM is a hard, NMP-free, APEO-free, alcohol-resistant, aliphatic, polyester, waterborne polyurethane dispersion. HD-2125 DMM was developed for use on flexible and rigid PVC and other plastic substrates. It may also be formulated to provide gloss topcoats on cementitious, metal, and wood substrates. This product exhibits superior chemical resistance properties while maintaining excellent flexibility and gloss retention characteristics.

DCL 1624 Molybdate Orange, PR.104 is a standard yellow shade molybdate orange pigment. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a highly reliable and versatile choice for a wide range of coating and plastic applications.

DCL 1005 Medium Yellow, PY.34 is a standard medium chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

AFCONA 5009 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces, reducing the interfacial tension between pigments or extenders and the vehicle. It is an economy grade of additive and stabilizes the pigments through electrical charge repulsion forces.