Products in Off Road & Commercial Vehicle Coatings: Radiation Curabl...

AFCONA 3031 is a polyether modified polysiloxane slip and leveling additive used primarily in metal and UV coatings. It provides a very good slip performance, which is characterized by an "oily" or "wet look" appearance that can visually enhance film thickness. AFCONA 3031 is used in metal coatings, such as industrial heat-cured systems, car refinish polyurethane clear topcoats, and other vehicle paint.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-381-N1 is a micronized synthetic and natural wax alloy that has a uniform melting range peaking at 91°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 174 is synthetic wax and polytetrafluoroethylene (PTFE) compounded in refined linseed oil. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TexMATTE 6005 is a cross-linked polymethyl methacrylate product.

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 87NS is a polymeric compound for non-skid applications. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

S-395-SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity, and the high onset of melt. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 171 is a synthetic wax compounded in refined linseed oil. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

Antioxidants - Others

Multifunctional additive with good wetting and dispersing properties for solvent-based and water borne coating systems, biodegradable. ANTIGEL is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Defoamer for solvent borne and water-based coating systems, silicone free. BLISTER FREE 75 shows very good defoaming properties in solvent borne: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, BLISTER FREE 75 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.

SILLITIN Z 89 puriss is similar to Sillitin Z 86 puriss but has a higher color requirements.

Afcona 3031 is a slip and leveling additive used mainly in metal and uv coatings.

SILLITIN Z 89 similar to Sillitin Z 86 but has a higher color requirements.

Multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. ANTIGEL 6217 is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL 6217 are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.