Products in Vehicle Refinish: Polyesters

Irganox® 1010 (ED), a primary antioxidant and stabilizer, belongs to the phenols and phenolics chemical family. Composed of pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate), this powder-form antioxidant ensures effective protection against oxidative degradation. With the added benefit of being odor-free, it is an ideal choice for applications where maintaining product scent is crucial.

Efka® FL 3745 is a silicone-free flow and leveling agent with air release properties designed for liquid non-aqueous coatings. It is also suitable for powder coatings, modifying surface tension to provide smooth, trouble-free film surfaces, and enhancing gloss. In its physical form, it is a clear, colorless liquid.

Tinuvin® 292 HP is a liquid hindered amine light stabilizer developed for color-sensitive coating applications. It is a versatile HALS with superior performance in both water- and solvent-based coatings, extending the usable lifetime of coatings by minimizing loss of gloss and cracking. It demonstrates excellent compatibility with a wide variety of coating systems.

Efka® RM 1469 is a multifunctional additive designed to serve as a rheology modifier, anti-sagging agent, and thickener. This versatile product is compatible with various polymers and resins, including polyurethanes (PU), acrylics, melamines and melamine formaldehydes (MF), and cellulose acetate butyrate (CAB), along with polyesters. It boasts features such as good shear viscosity and high gloss, making it a valuable addition to formulations where these properties are crucial.

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion-inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate) and is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. The recommended loading levels for HALOX® Z-PLEX® 250 range from 5–10% based on the total formula weight.

HALOX® 550 WF is a water-free (WF) corrosion inhibitor and adhesion promoter that uses a sol-gel-based formula. It is designed to protect a variety of coatings, including waterborne and solventborne clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. This product is suitable for use in low-pH and acid-catalyzed systems.

HALOX® Z-PLEX 111 is a corrosion-inhibiting pigment used in protective coating systems that is highly versatile and more cost-effective than commercial zinc phosphate. HALOX® Z-PLEX 111 can provide a higher level of corrosion protection than commercial zinc phosphate when used as an equal-weight replacement.

HALOX® Zinc Phosphate is a white, non-refractive, corrosion-inhibiting pigment that is widely used in protective coating systems. It is also known as zinc phosphate-dihydrate and is characterized by a narrow particle size distribution, with an upper particle size limit of 10 microns and a mean particle size of 5 microns. This pigment is highly versatile and serves as a standard corrosion inhibitor for most high-performance resin systems, including vinyl, chlorinated rubbers, and epoxies. It is especially recommended for high acid-value resins, catalyzed baking systems, and vinylidene chloride latexes. In addition, HALOX® Zinc Phosphate is an ideal choice for thin film applications (less than 1 mil or 25 microns). It meets the ASTM D 6280-98 specification for zinc phosphate pigment type I and is widely used in the industry.

HALOX® SZP-391 is a white, nonrefractive, corrosion-inhibiting pigment that is highly efficient and versatile. It is recommended for use in a wide variety of resin systems, such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. Its fine particle size and low oil absorption make HALOX® SZP-391 the preferred pigment for thin-film applications (<1 mil or 25 microns).

HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor designed for corrosion protection in thin film coatings such as water and solvent-based finishes, high gloss DTM, conventional primers, acrylic clear coats, fast-drying lacquers, wash primers, anti-fingerprint coatings, and conversion coatings. It also increases hydrophobicity and is pH stable, making it compatible with both waterborne and solventborne coatings.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

AFCONA 2025 is a moderate defoamer with minimal side effects that prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems, and is recommended for medium-viscosity applications applied by spray and brush.

AFCONA 4080 is an effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. It has excellent stability performance due to steric hindrance, and is suitable for deflocculation of all types of pigments. It is a modified polyurethane polymer with a high molecular weight.

AFCONA 4047 is a high molecular weight polymeric dispersant for the deflocculation of all types of pigments. AFCONA 4047 is a highly effective polymeric dispersant used to stabilize inorganic and organic pigments, as well as carbon blacks. Steric hindrance provides very good stability performance with all type of pigments.

Afcona - 3700 is a wetting, leveling, and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties.

ECOTINT® SB RED OXIDE 03 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB REDDISH YELLOW 12 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB VIOLET 10 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB ORANGE 06 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB YELLOW OXIDE 02 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB MEDIUM YELLOW 14 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB BLACK 04 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB WHITE 01 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB REDDISH YELLOW 13 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB GREENISH YELLOW 07 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB GREEN 08 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB BLUE 09 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB RED 05 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Domemul RA 9675 is an acrylic APEO-free latex resin designed for the preparation of industrial aluminum pigmented aqueous basecoats. The pseudoplastic rheology profile of this resin ensures a great metallic appearance.Features & BenefitsEspecially designed for 1k waterborne metallic shades basecoatsStrong pseudoplastic and thixotropic rheology profileImproved metallic pigment orientation

ECOTINT® SB MAGENTA 11 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Domalkyd 5331 75 BAc is an alkyd resin modified with synthetic fatty acids designed for 2K PU enamels and varnishes. This resin is suitable for 2K car refinishing, ACE machinery, wood and high-grade industrial paints.Features and Benefits :2K PU coatingswood coatingscar refinishing, ACE machinery and industrial paints

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents.

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents.

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents.