Products in Vehicle Refinish: Pigment

DCL YE998 Molybdate Orange, PR.104 is a pre-darkened blue-shaded molybdate orange pigment with stir-in properties used in coating and plastic applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1179 Perylene Red, PR.179 is a semi-transparent maroon shade with excellent fastness properties and is FDA-approved (Section 178.3297). It is primarily recommended for higher-quality industrial coatings, automotive OEM and refinishes, and plastics such as polyolefins, PVC, and PUR, and may also be suitable for styrene and other polymers.

DCL 8817 Transparent Red Iron Oxide, PR.101 is a high performance transparent red iron oxide offering high color strength, weather resistance, and UV protection properties. 8817 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 1229 Quinacridone Magenta, PR.122 (Blue shade) is a standard magenta shade PR 122 that exhibits all the typical properties of quinacridone pigments. It is a low-warpage pigment, recommended for plastics, coatings, and inks, and finds a wide range of applications in coatings, such as trade sales, automotive, agricultural equipment, architectural paints, and industrial finishes. Its excellent heat stability and exterior durability make it suitable for use in various polymeric resin systems, such as polyolefins, polystyrene, polycarbonate, and ABS.

DCL 1242L Disazo Scarlet, PR.242 is a yellowish shade, red pigment with excellent fastness properties. It shows excellent resistance against ethanol and water. It is mainly applicable in Plastics such as PVC, PE, PP, PS and fiber. Automotive/aerospace, industrial and powder coatings. Solvent flexo and water flexo inks etc.

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL ORS Bismuth Orange, PO.86 is honored to present a brand-new color index for the coatings and plastics market. PO.86 is the cleanest inorganic orange pigment available and is recommended for use in premium-grade coatings for automotive, industrial, and architectural applications. It is suitable for use in both solvent and water/universal coatings.

DCL 1370 Naphthol Red, PR.170 is a very bright, yellow-shaded naphthol red with very good lightfastness, opacity, flow properties, and chemical resistance. The shade of 1370 is yellower and more opaque compared to that of 1970A. It is a reliable and versatile choice for various plastic, ink and coating applications.

DCL 7136 Benzimidazolone Orange, PO.36 is a high-performance blue-shades orange pigment for use in high-end coating applications. It can be used in all coatings, but is recommended for the highest-end coating applications, where excellent weather fastness, heat stability, chemical resistance, rheology, and dispersion are required.

DCL 7336 Benzimidazolone Orange, PO.36 is a high performance blue shade orange pigment, ideal for use in high-end coating applications that require excellent weather fastness, heat stability, chemical resistance, rheology, and dispersion. It is suitable for use in all coatings but is particularly recommended for the most demanding applications.

DCL 1177 Anthraquinone Red, PR.177 is a transparent, non-warping, blue-shaded red with excellent fastness properties. It is FDA-approved (Section 178.3297) and can be used in a variety of plastics, including polyolefins and PVC, as well as PET, ABS, rubber, and styrene. Additionally, it is suitable for general industrial coatings and automotive applications.

DCL 7036 Benzimidazolone Orange, PO.36 is a vibrant, reddish-orange pigment specifically designed for high-grade industrial coatings, automotive refinishing, and coil coatings. With excellent weather fastness and heat stability, it is an ideal replacement for molybdate orange. DCC Orange 7036 provides a cost-effective, lead-free alternative to molybdate orange for various applications.

DCL 7354 DPP Red, PR.254 is a yellow-shaded DPP that offers excellent opacity, high color saturation, weather resistance, heat stability, acid, alkali, and solvent resistance. It is recommended for high-end coatings and high-end plastics applications, and is FDA compliant for indirect food contact plastic applications.

DCL 1166 Disazo Scarlet, PR.166 is a transparent, yellow-shaded red with excellent heat stability and very good fastness properties. It is recommended for auto refinishes, solvent industrial coatings, and powder coating applications. It is also recommended for all ink and plastic applications.

DCL YE941 Molybdate Orange, PR.104 is a standard yellow shade molybdate orange that exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of coating and plastic applications.

DCL 1372 DPP Flame Red, PR.272 is a bright, opaque, slightly yellow shade red pigment that stands out as an offset to the industry standard. It boasts excellent overall properties. This pigment finds major applications in the following: Plastics such as PVC, PE and PP Automotive/aerospace, industrial, powder coatings Water flexo, solvent flexo and inkjet inks

DCL 2443 Vat Orange, PO.43 is a bright, high-chroma orange pigment with excellent overall properties and high tint strength, suitable for nearly all types of coatings and plastics applications. It can be used to formulate pastel colors and for shading as well as creating copper metallic shades; however, full shade applications may have a tendency to darken upon exposure.

DCL 1970-A Naphthol Red, PR.170 is a bright, blue-shaded naphthol red with good overall properties. It has a wide range of applications, including in plastics such as PVC and PE, as well as decorative, powder, and industrial coatings. It is also used in solvent flexo, inkjet, offset, and UV inks.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 5610 Molybdate Orange, PR.104 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance yellow shade moly orange pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics and roadmarking (subject to regional legislation).

DCL 5606 Molybdate Orange, PR.104 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance blue shade moly orange pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics and roadmarking (subject to regional legislation).