Products in Automotive & Transportation: Methacrylates

Bisomer® LMA (Lauryl Methacrylate) is a hydrophobic methacrylate monomer.

VITROFLEX TRANSPARENT MCV229NN is the acrylic pouring plate with transparent colors that allow vision through.

Sacryl 2066 is a copolymer of methyl methacrylate and n-butyl methacrylate.

SCIGRIP® SG5000 Adhesive has been proven effective when used instead of glass patching in the repair of cracks and dings in fiberglass molds. It has also been shown to provide more durable repairs when compared to other, traditional patching and repair methods.

ADERIS® 8068 is Advanced structural methacrylate adhesive used for thick joints and vertical applications. It is versatile with low shrinkage, high-performance flexible bonding, high gaps and standard socket.

SCIGRIP® SG230HV is a two-component, 10:1 mix ratio product for bonding composite and other plastic parts with little to no surface preparation1,2. The adhesive is designed to work with a selection of activators to provide a wide range of working times from 30 to 120 minutes. SG230 HV is mostly used in marine, transportation and construction applications. It is especially suited for bonding large structural parts requiring long working times and for filling deep irregular gaps up to 1.5 inches (39 mm). SG230 HV is available in 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment. The combination of SG230 HV A with SG220 B activator is recommended only for use above 85°F (29°C) ambient temperature.

ADERIS® 8140 is Advanced structural methacrylate adhesive and is used for multipurpose structural bonding and Important games,. It has high coat resistance and fast setting.

VITROFLEX TRANSPARENT MCA467NN is the acrylic pouring plate with transparent colors that allow vision through.

Policril® Standard 2050 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

Policril® Standard 2020 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

Smiths Metal Centers Acrylic PMMA is an amorphous thermoplastic which is optically transparent, unaffected by moisture, and offers a high strength-to weight ratio. Common trade names for this material include Plexiglas®, Acrylite® and Lucite®. Acrylics are not recommended for use with chlorinated or aromatic hydrocarbons, esters or ketones. However, the material is unaffected by aqueous solutions of most detergents, acids, alkali’s and laboratory chemicals. It is both a thermoplastics and transparent plastic and is often used as an alternative to glass, but should not be used in structural applications due to poor impact resistance.

Bisomer® TEGDMA (Triethyleneglycol Dimethacrylate).

ADERIS® 8061 is Advanced structural methacrylate adhesive. It is used for flexible peel-resistant bonding and is versatile with low shrinkage, high-performance flexible bonding and quick plugs.

Policril® Standard 1290 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

Bisomer® EP150DMA is a dimethacrylate ester of a specifically designed block polyalkylene glycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems.

Jiangsu Tetrachem TTA15 is a light yellow liquid with the chemical name 3,4-Epoxycyclohexylmethyl Methacrylate. This product has both properties of epoxy and acrylic resins and has the ability to cure multiple different ways. It has low viscosity, heat resistance, weather resistance and electrical insulation. TTA15 is primarily used in coatings and adhesives.

SABIN ENGINEERING AAA PMMA is a transparent thermoplastic. SABIN ENGINEERING AAA PMMA are able to withstand harsh weather conditions, including UV radiation. These sheets maintain their optical properties for several years and are suitable for industries such as construction and signage. Acrylic’s mechanical and optical properties make it an excellent replacement for glass.

ADERIS® 8041S is Advanced structural methacrylate adhesive and is used for multipurpose structural bonding. It is versatile, low to medium games and very fast.

ADERIS® 8161HV is Advanced structural methacrylate adhesive. It is used for flexible peel-resistant bonding and is versatile with low shrinkage and flexible bonding with high performance slow grip.

Bisomer® PEM63P HD is a hydroxyl functional methacrylate monomer.

SCIGRIP® SG200-20 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding composites, thermoplastics1 , metals2 and combinations thereof. Minimal surface preparation1, 2 combined with a choice of 10, 20 and 40 minute working times, provide reduced labor and production cycle time. These products are widely used for marine, transportation and general plastic bonding applications. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

ADERIS® 8141 is Advanced structural methacrylate adhesive and is used for multipurpose structural bonding and Important games. It has high coat resistance.

Bisomer® HPMA (Hydroxpropyl Methacrylate) is a hydroxyl functional methacrylate monomer.

Bisomer® S20W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

Meracryl™ HPMA 98 is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. Hydroxyesters are recommended for heat or room temperature cured coatings with permanent marring and solvent resistance, high gloss retention and weatherability.

ADERIS® 8062 is Advanced structural methacrylate adhesive. It is used for flexible peel-resistant bonding and is versatile with low shrinkage and flexible bonding with high performance slow grip.

Meracryl™ Hema 98 is a functional monomer that can copolymerize with other monomers to produce copolymers with a hydroxy group in the side chain. Hydroxyesters are recommended for heat or room temperature cured coatings with permanent marring and solvent resistance, high gloss retention and weatherability.

Bisomer® BZMA (Benzyl Methacrylate) is a low viscosity mono-functional monomer suitable for a wide range of applications.

SCIGRIP® SG800-05 are two component, 10:1 ratio Methacrylate Adhesives for bonding metals and other plastic substrates. The SG800 Series is formulated to meet specific requirements of the transportation industry, including high temperature strength, excellent fatigue and impact resistance and low bond-line read through on show surfaces. Ability to adjust working times and minimal surface preparation requirements makes the SG800 Series ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for use with meter-mix dispense equipment.

ADERIS® 8069 is Advanced structural methacrylate adhesive used for thick joints and vertical applications. It is versatile with low shrinkage, flexible bonding at high performance, high play and slow grip.

SCIGRIP® SG600-10 Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts1 . These advanced products are designed to meet specific requirements of the transportation industry, including excellent fatigue and shock load resistance. The combination of minimum surface preparation1, 2, and reduced read through makes the SG600 series ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for use with meter-mix dispense equipment.

Moulex® TMPTMA 70 by Additek is a vulcanization co-agent on carrier silica. It offers increased mechanical properties with peroxide cured compounds. It exhibits increased resistance to solvents. Provides improved compression set.

Policril® Standard 3050 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

ESD I6118 belongs to ESD Polymethyl Methacrylate Series with Anti-static, High mechanical strength, Static dissipative and Good toughness.

GEHR PMMA XT® (ACRYL) is amorphous material belongs to the polymer group of standard plastics, due to its thermal and mechanical properties. In addition to its high mechanical strength and rigidity, it certainly has an extraordinarily brilliant transparency. Its weather and UV resistance as well as its surface hardness are also very high. PMMA is also scratch-resistant and polishable. The continuous operating temperature ranges between -40 °C and +70 °C. The chemical resistance to most solvents, the resistance to stress cracking as well as the toughness is clearly subordinate compared to other materials from the group of standard polymers.

Policril® Standard 2040 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.