Products in Automotive & Transportation: Unsaturated Polyester (UPE)

espol™ 30.00 is a non-accelerated isophthalic polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

Crystic® Polyester Resin 489 is a thixotropic isophthalic polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for molding boat hulls with outstanding durability and superior blister resistance. The outstanding wetting characteristics of Crystic 489 provide rapid impregnation with freedom from drainage.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin 124PA is a medium-thixotropic, tropicalized, pre-accelerated, waxed unsaturated polyester resin. It is designed for rapid wetting and impregnation of reinforcements, making it ideal for building boats, water tanks, bath tubs, shower trays, and other products that require water resistance. The unwaxed version of this resin is also available.

espol™ 41.00 is a non-accelerated isophthalic neopentyl glycol (ISO-NPG) polyester resin suitable for aggressive marine applications. The resin has been approved by the IRS (Indian Registrar of Shipping) for usage on ships and other marine transport vehicles. It has been specifically formulated for resistance to seawater, offering superior osmotic stability alongside excellent mechanical properties.

Crystic® Fire Retardant Resin U1007TPA is a filled, fire-retardant, pre-accelerated, thixotropic unsaturated polyester resin designed for RTM and RTM light. It cures with standard MEKP peroxide and has a 17-minute gel time. This product will achieve M2 to the French fire standard.

Crestafix® 90-82PA Polyester Bonding Paste is a pre-accelerated polyester bonding paste. This product is a viscous, white, filled compound that is specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, composite constructions, and car body components. This product is a high productivity grade designed for use with narrow mixers that will dispense at a high flow rate while maintaining thixotropic properties upon vertical application.

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Fire Retardant Resin 5046PA is a filled, orthophthalic, pre-accelerated, unsaturated polyester resin suitable for fire retardant applications. It is designed for manufacturing composite parts using hand layup or injection processes. This product is ideal for demanding applications in buildings, public transport, and railways. It has excellent fire resistance and a Q rating of 0.53, achieving M1/F2 standards as a fully cured laminate with Gelcoat 967 PA FR. This product has a low viscosity, which lowers consumption and enhances suitability for RTM processes. The low styrene content also provides better comfort for users, and the stability provides low filler sedimentation. Pigments and additional fillers can be added to this resin. However, their effects should be tested in workshop conditions before being added to the formulation.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® FR1166 PAK is a filled, orthophtalic, pre accelerated, low styrene content and thixotropic unsaturated polyester resin. It has to be used when excellent low smoke and fire resistant laminates are required. Crystic PD1166 PAK is halogen free and does not contain heavy metals.

Crestafix® 90-78PA Polyester Bonding Paste is a fast-curing, pre-accelerated, orthophthalic polyester bonding paste. It exhibits exceptional handling properties, especially on GRP and wood substrates. This product has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, and any other non-structural bonding applications. It is non-sagging and does not require resin additions.

Crestafix® 621CC 85 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highliy thixotropic polyester can also be used on timber and plasterboard.

Crestafix® 90-84PA Polyester Bonding Paste is a lightweight, low-exotherm, pre-accelerated orthophthalic polyester bonding paste. It is a non-sagging compound, designed for non-structural applications where gap-filling may be a secondary requirement. This product has been specifically designed to provide weight-saving properties and ease of application.

Crystic® Polyester Resin 491PAT is a versatile, pre-accelerated, unsaturated polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. This product is thixotropic and can be applied with either brush or spray equipment. It may also be used in the pultrusion process for the production of profile sections. This product is suitable for the fabrication of high-performance boat hulls destined for use in warm and tropical waters.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crestafix® 90-80PA Polyester Bonding Paste is a pre-accelerated, orthophthalic polyester bonding paste that is reinforced with 3 mm glass fibers. This product exhibits exceptional mechanical and handling properties, has low shrinkage, and has better resistance to impact. It has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, composite constructions, and car body components. It is non-sagging and does not require resin additions.

espol™ 30.01 is a pre-accelerated isophthalic polyester resin that rapidly wets out reinforcements. espol™ 30.01 has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

Cuyahoga Plastics AB4000 is a mineral-filled, glass fiber reinforced polyester thermoset suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms & box length extrusions.

Cuyahoga Plastics AB5000 is a UV resistant, flame retardant, glass-reinforced polyester thermoset suitable for outdoor applications. Compression, transfer, and injection molding grades are available. It is currently supplied in bulk form, cut preforms, and box length extrusions.

Cuyahoga Plastics EB5000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms, and box length extrusions.

T19X9 is an orthophthalic unsaturated polyester resin tixotropic, preaccellerated , and catalysis indicator. T19X9 is mostly used in hand lay-up application.

USP-EAGLE (BF36-62) is Unsaturated Polyester resin with high hardness, high reactivity, good wetability, fast drying and early sandability.it is used in standard &Light weight body filler for cars.

Cuyahoga Plastics EB3000-2 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms and box length extrusions.

Cuyahoga Plastics EB7000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form.

USP-EAGLE (BF40-68) is a pre-accelerated Unsaturated Polyester resin with high flexibility, medium reactivity.it is used as standard & light weight body filler for cars.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

R10x9 is a pre- accelerated orthophthalic unsaturated polyester resin of medium reactivity and medium viscosity dissolved in styrene. R10x9 is mostly used in casting applications.

R10X0 is a pure orthophthalic unsaturated polyester resin of medium reactivity and medium viscosity dissolved in styrene. R10X0 is mostly used in casting production.

ISOPHTHALATES TP1005 is a Tropicalized Thixotropic.

POLYNT 9153 KA - Unsaturated polyester resin in styrene,DCPD. It is used to produce isothermal sandwich panels through press and vacuum molding method.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.