Products in Automotive & Transportation: Pigment

Magnapearl® 4000 functions as a pigment and colorant, offering an effect pigment. It falls under the category of pearlescent and inorganic pigments, with mica as its base. Known for excellent whiteness and good optical properties, it's applicable in textile dyeing processes. This solid pigment presents a white color and comes in a solid physical form.

Ti-Pure™ R-103 is a rutile titanium dioxide pigment manufactured by the chloride process. Its high opacity and very blue undertone tint produce clean, bright whites at low loadings in clear resins and those with natural color. Ti-Pure™ R-103 is specially formulated to reduce the discoloration of resin compounds and finished plastic products during processing and exposure to ultraviolet light.

Ti-Pure™ R-350 is designed to exceed today’s expectations for titanium dioxide and set tomorrow’s standard in plastic formulations. This product is intended for formulators looking for a single grade of TiO2 with performance suitable for a wide range of plastic end uses. It provides a matchless combination of excellent dispersion and processing, minimal volatile content, minimal interaction with polymer additives, durability, and the brightness that only chloride-produced rutile TiO2 can provide. This product is the only TiO2 available that can offer such an exceptional set of properties.

DCL 3RLM Bismuth Vanadate, PY.184 is a lemon-shaded yellow pigment with excellent durability properties. DCC Yellow 3RLM exhibits high saturation and high opacity and is recommended for use in high-grade industrial and automotive paints. It has good overall resistance properties.

DCL 4GMX Bismuth Vanadate, PY.184 is a very green shade yellow pigment with the highest color strength, gloss, and opacity versus traditional grades and very good durability properties. DCC Yellow 4GMX is especially suitable for industrial and decorative paint applications.

DCL 7036 Benzimidazolone Orange, PO.36 is a vibrant, reddish-orange pigment specifically designed for high-grade industrial coatings, automotive refinishing, and coil coatings. With excellent weather fastness and heat stability, it is an ideal replacement for molybdate orange. DCC Orange 7036 provides a cost-effective, lead-free alternative to molybdate orange for various applications.

DCL 1002 Medium Yellow, PY.34 is a standard medium chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1003 Medium Yellow, PY.34 is a standard medium chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1019 Medium Yellow, PY.34 is a pre-darkened standard medium chrome yellow pigment used in plastic and coating applications where excellent weatherefastness is required. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 3GMX Bismuth Vanadate, PY.184 is a new generation of Bismuth Vanadate pigment from Dominion Color Corporation that offers a highly attractive, greenish yellow shade with an exceptional color strength, high gloss, clean shade, and easy dispersion. It has been developed to be particularly suitable for industrial coatings.

DCL 1623 Molybdate Orange, PR.104 is a standard yellow shade molybdate orange pigment. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a highly reliable and versatile choice for a wide range of coating and plastic applications.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL 3GMX-SI Bismuth Vanadate, PY.184 is a bright, green-shaded yellow pigment with stir-in dispersing properties. DCC Yellow 3GMX-SI has the highest color strength, gloss, and opacity versus traditional grades. DCC Yellow 3GMX-SI is especially suitable for automotive, industrial, and decorative paint applications.

DCL 1032 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 8817 Transparent Red Iron Oxide, PR.101 is a high performance transparent red iron oxide offering high color strength, weather resistance, and UV protection properties. 8817 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 1370 Naphthol Red, PR.170 is a very bright, yellow-shaded naphthol red with very good lightfastness, opacity, flow properties, and chemical resistance. The shade of 1370 is yellower and more opaque compared to that of 1970A. It is a reliable and versatile choice for various plastic, ink and coating applications.

DCL 305 Chromium Oxide Green, PG.17 (medium shade, G6099 type) is a high-quality, clean, medium shade, very stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL 5020 Medium Yellow, PY.34 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance medium shade yellow pigment with stir-in properties and is recommended for high-end decorative, automotive, aerospace, industrial, and powder coatings along with plastic applications.

DCL 3777 Phthalocyanine Green, PG.7 (blue shade) is a bright, blue-shaded phthalocyanine with excellent overall properties. The product is FDA-approved (Section 178.3297) and recommended for various applications in inks, coatings, and plastics. It can be easily dispersed in plastics, coatings, and water-based flexo inks.

DCL 5606 Molybdate Orange, PR.104 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance blue shade moly orange pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics and roadmarking (subject to regional legislation).

DCL RMXA Bismuth Vanadate, PY.184 is a lemon shade yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, and high opacity. It is recommended for high alkaline substrates and alkaline-containing systems like silicate plasters and stuccos, as well as in many polymers.

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL 1012 Medium Yellow, PY.34 (stir in) is a standard medium chrome yellow pigment with stir-in properties used in plastics and coatings. The applications of this product are estricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 7151 Benzimidazolone Yellow, PY.151 is a Pigment Yellow 151 based on benzimidazolone chemistry and is a direct match to H4G. It offers superior resistance properties, such as excellent weather fastness and chemical resistance, making it ideal for demanding coating applications where a green shade of yellow is required.

DCL KY881 Lemon Yellow, PY.34 is a silica-encapsulated lemon chrome-yellow pigment with superior heat and chemical resistance for high-end industrial coating and plastic applications. It also exhibits good overall lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of applications.

DCL YE998 Molybdate Orange, PR.104 is a pre-darkened blue-shaded molybdate orange pigment with stir-in properties used in coating and plastic applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 3GLM Bismuth Vanadate, PY.184 is a brilliant green-shaded yellow pigment with high color strength and opacity. DCC Yellow 3GLM exhibits excellent weather fastness and is recommended for use in automotive and high-grade industrial paints, as well as plastics such as PE and PP.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 1013 Medium Yellow, PY.34 is standard medium chrome yellow pigment used mainly for plastic and coating applications. It has good overall resistance properties. This pigment finds major applications in the following: Plastics such as PVC, PP and PE. Automotive/aerospace, powder and industrial coatings.

DCL Y934 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics and roadmarking applications (subject to regional legislation).

DCL 8300P Phthalocyanine Blue, PB.15:3 is a beta-shaded phthalocyanine blue pigment that is characterized by its easy dispersibility. This pigment is FDA-approved (Section 178.3297). It exhibits good overall resistance properties, lightfastness, and heat stability, making it a reliable and versatile choice for a range of applications.

DCL 1026 Medium Yellow, PY.34 is a standard lemon chrome yellow pigment used in plastic and coating applications. It has overall good resistance properties and is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1606 Molybdate Orange, PR.104 (stir in) is a pre-darken blue shade molybdate orange pigment with stir in properties used in plastic and coating applications where excellent weather fastness properties are required. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 5033 Lemon Yellow, PY.34 is a pre-darkened, SO2-resistant, high-performance lemon shade yellow pigment with stir-in properties and is recommended for coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 5RLM Bismuth Vanadate, PY.184 is a mid-shaded yellow pigment with excellent durability properties. DCC Yellow 5RLM exhibits high saturation, high opacity and is recommended for use in high-grade industrial, aerospace industrial, powder, and automotive paints, as well as PE and PS plastics.