Products in Automotive & Transportation: Reinforcement

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

AL PS-35, a precipitated, non-crystalline, amorphous silica, is an excellent silica for improving mechanical properties of rubber and elastomers. Also, due to its high level of absorption, it can be used as a carrier for liquid additives in applications such as animal feed.

AL 69C is a 50/50 mixture of AL69 with N330 carbon black to form a free flowing granule that is easy to use and at the same time utilize the properties of the AL 69 silane. AL 69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

AL69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

AL PS-33 is an economical rubber reinforcing silica. The combination of high reinforcing, good abrasion resistance and ease of processing make it a good choice for formulators. It enhances the physical and mechanical properties of many rubber compounds.

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Silanogran Silanogran SI-69/GR 70 offers improvement of mixing properties e. g. reduction in Mooney viscosity, better processability when mixing, calendering and extruding and influences the physical-mechanical data of the vulcanizates favorably.

Orient Black® N375 offers high wear resistance and reinforcing properties.

Dragonite™ -XR is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-XR is an untreated product grade with slightly lower reactivity and acidity due to 2% iron oxide content. It is recommended at loadings of 30 - 60 wt%.

Orient Black® N299 is an intermediate Super Abrasion Furnace (ISAF) grade with high structure and high surface area features high reinforcement in tire tread compound.

Shijiazhuang Saiya Chemical Carbon Black - N220 it appears in pure black fine grain or powder which can burn in air. Widely used in textile, printing and dyeing, ceramic, paper, synthetic detergent, pesticide, metallurgy, food, rubber, etc.

Black Bear BBC TR30 provides comparable hardness with unique reinforcing characteristics and a PAH level below detection limits. We have also seen dramatic synergistic effects when blended with N330. For Technical Rubber Goods we manufacture two grades that prove a versatile, one-to-one replacement for a wide range of current grades; BBC TR30 and BBC TR30S.

MB6015-00 is a FIBRIL nanotube - based masterbatches. MB6015-00 is a Amorphous Base Resin Polycarbonate (PC).

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

MB2020-00 is a FIBRIL nanotube - based masterbatches.MB2020-00 is a Amorphous Base Resin Polystyrene (PS).

Orient Black® N234 is an Intermediate Super Abrasion Furnace (ISAF) grade with high structure and high surface area offers high reinforcement and excellent extrusion properties.

MB4220-00 is a FIBRIL nanotube - based masterbatches. MB4220-00 is a Semi-Crystalline Base Resin Nylon (Polyamide) 12 (PA12).

MB3615-01 is a FIBRIL nanotube - based masterbatches. MB3615-01 is a Elastomer Base Resin Thermoplastic Urethane (TPU).

MB7015-00 is a FIBRIL nanotube - based masterbatches. MB7015-00 is a Semi-Crystalline Base Resin Polyphenylene Sulfide (PPS).

Orient Black® N220 is an intermediate Super Abrasion Furnace (SAF) grade withmedium structure and high surface area, offers high tensile strength.

MB1215-00 is a FIBRIL nanotube - based masterbatches. MB1215-00 is a Epoxy Base Resin Bisphenol A/ Epichlorohydrin (BPA/EPI).

ZC120MP Precipitated Silica is made by advanced pressure spraying drying technology, with uniform size, high dispersion, high fluidity, and low dust properties. Don't float in the sky during production,transportation or process. It is convenience to transport and process.

Orient Black® N550LG is a low surface area, high structure and smooth pellet surface reinforcing filler grade having high purity.

MB9015-00 is a FIBRIL nanotube - based masterbatches. MB9015-00 is a Semi-Crystalline Base Resin Polyetheretherketone (PEEK).

Orient Black® N330 is a High Abrasion Furnace (HAF) grade features medium structure and medium surface area, offers high resilience, easy processing and good tensile strength properties.

Orient Black® N550 is a low surface area and high structure fast extruding furnace grade offers moderate resilience.

MB8515-02 is a FIBRIL nanotube - based masterbatches. MB8515-02 is a Amorphous Base Resin Polyetherimide (PEI).

SPIRATAC® 100 is a treated fiber for improved processing of spiral and knitted packages. Available on our full line of industrial fibers.

Orient Black® N326 is low structure carbon black of N300 series grade and is characteristics with medium surface area offers high elongation, flexibility and tear strength in rubber application.

MB2820-00 is a FIBRIL nanotube - based masterbatches. MB2820-00 is a Elastomer Base Resin Ethylene Propylene Diene (EPDM).

Ceramer 15 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Dragonite™ -HP is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-HP is an untreated product grade with high reactivity and acidity. It s recommended at loadings of 1 - 10 wt%.

MB3020-01 is a FIBRIL nanotube - based masterbatches. MB3020-01 is a Semi-Crystalline Base Resin Polypropylene (PP).

Orient Black® N121 is a Super Abrasion Furnace (SAF) grade with high structure and high surface area offers high reinforcement in rubber products.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).