This severely hydrotreated naphthenic base oil is primarily used in the metalworking and compounder blending industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light.

NA-SUL® CA-1259 is a high performance liquid rust and corrosion inhibitor for rust preventives and dewatering fluids. It offers excellent solubility in a wide range of mineral oils, esters and vegetable oils. NA-SUL® CA-1259 is less viscous than many other additives of its type and may often be able to be cold blended into oils. This results in lower energy cost and faster processing. NA-SUL® CA-1259 has an exceptional ability to help to separate water from oil and oil/solvent solutions making it very suitable for dewatering fluid applications. The solubility of NA-SUL® CA-1259 should be verified in the diluents that are being considered for use.

NA-SUL® CA-50 is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of oil-soluble calcium carbonate.

This severely hydrotreated paraffinic base oil provides excellent color stability and consistency. It passes the IP 346 labeling requirement.

UNIPAR® 580 CC is a paraffinic process oil.

MARLOWET M 100 VG is a fatty alcohol poly-glycol ether, based on LIALCHEM 25/75 and propylene oxide.

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

This severely hydrotreated naphthenic process oil provides good solvency for the rubber and chemical processing industries. It has a low pour point, a low odor level, excellent color, and resistance to discoloration by heat or ultraviolet light

Butyl triglycol ether of 70% mass purity. Butyl triglycol ether (BTG) has high dissolving power for cellulose nitrate, many synthetic, natural resins and dyestuffs. BTG is used typically in cutting and hydraulic oils, particularly in brake fluids, mining, oil field chemicals and textile dyes. For documents specific to a region, please contact Sasol using the 'Request Document' button.