Products in Automotive Fluids & Lubricants: Industrial Lubricants

PETROSOL D 20/26 is a fraction of hydrogenated kerosene, with an initial and final distillation range typically between 200°C and 260°C. Notably, it exhibits very low aromatic content and has a faint odor. Its low aromatic content and nearly imperceptible scent make it a versatile choice for various applications, including use in paints, varnishes, fuel, solvents, lubricants, multipurpose oils, drilling fluids, insecticides, home air fresheners, and as an efficient degreaser.

LUBIMAX® PIB 1000 SA is a member of the LUBIMAX® PIB series of polyisobutenes. LUBIMAX® PIB 1000 SA is colorless, chemically inert, nondrying and highly resistant to oxidation and photodegradation. This range of products is non-toxic and will not leave residue post volatilization or thermal decomposition.

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

LUBRICIT TMP C810 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

NEWPOL 50HB-660 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

LUBRICIT TMP C9 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DOA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GTL is a fully saturated glycerol triester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9515 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range and good oxidative stability.

LUBRICIT GMO is a glycerol monooleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT 9505 is a dimerate fluid that is used as a synthetic base oil for formulations requiring good low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DINA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DTDA/1 is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHD is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GMO-VEG is a glycerol monooleate derived from vegetable fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9522 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester designed for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. LEXOLUBE CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. LEXOLUBE CQ-3000 is a USDA Certified Biobased Product with high biodegradability that is also on the LuSC list, making it a great choice for Vessel General Permit (VGP) or EcoLabel products.

LUBRICIT GMT is a glycerol mono/diester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 2-EHD/1 is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DTDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GTO is a glycerol trioleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT DIDS is a sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

NEWPOL 50HB-260 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

BT75 is a high viscosity, lubricant base oil designed specifically to help customers in the lubrication industries meet their production quality standards. This high quality renewable base oil offers exceptional technical performance and environmental benefits.

RIANOX® L150 is a mixture of aminic and high molecular weight phenolic antioxidant for lubricants

LUBIMAX® PIB 1000 is a member of LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 1000 is colorless, chemically inert, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.

BT22 is a medium viscosity, lubricant base oil designed specifically to help customers in the lubrication industries meet their production quality standards. This high quality renewable base oil offers exceptional technical performance and environmental benefits.

NA-LUBE® FM-1191 is a liquid friction modifier for automotive and industrial lubricants as well as greases. NA-LUBE® FM-1191 does not contain any sulfur or phosphorus. NA-LUBE® FM-1191 is soluble in both synthetic and petroleum based stocks.

PUREstab L 135 is a liquid hindered phenolic antioxidant that is highly effective thermal stabilization of plastics (especially polyurethanes and polyols) and lubricants (especially industrial lubricants and engine oils).

LUBIMAX® PIB 1300 is a member of the LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 1300 is colorless, chemically inert, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.