Products in Lubricants & Functional Fluids: Excellent Lubricity

LEXOLUBE CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester designed for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. LEXOLUBE CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. LEXOLUBE CQ-3000 is a USDA Certified Biobased Product with high biodegradability that is also on the LuSC list, making it a great choice for Vessel General Permit (VGP) or EcoLabel products.

LEXOLUBE IPP is a long chain fatty acid monoester. Isopropyl esters are partially branched structures that resist hydrolysis and are well suited for use in water-based metalworking fluids.

LUBRICIT 2-EHP is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LUBRICIT 2-EHD/1 is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 9526 is a complex polyol ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation. LEXOLUBE 9526 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LEXOLUBE NBS is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

NEWPOL LB-650X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL LB-300X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL LB-1800X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL LB-400XY is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL 50HB-260 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

CalEster™ F is a higher viscosity polyol ester made from dipentaerythritol and saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ T is NSF HX-1 registered as suitable for use in food manufacturing industry. CalEster™ T is suitable for a broad range of lubricant applications where low viscosity, wide temperature capability, and biodegradability are desired, including automotive engine oils, environmental lubricants, air compressor oils, transmission fluids, turbine oils, hydraulic fluids, and wide temperature grease. CalEster™ T also makes an excellent correction fluid for low polarity base oils like PAO and GTL. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 68 S is an ISO 68 pure polyol ester made from mono-pentaerythritols and saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ N is suitable for a broad range of lubricant applications where a combination of lower viscosity and a wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ TS is suitable for a broad range of lubricant applications where a wide operating temperature capability is desired including turbine oils, gear oils, engine oils, air compressor oils, and hydraulic fluids. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ MW is suitable for a broad range of lubricant applications where a combination of lower viscosity and wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 32 Pro is an ISO 32 pure polyol ester made from pentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

CalEster™ 22 Pro is an ISO 32 pure polyol ester made from pentaerythritol with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

NEWPOL V-10-C is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

CalEster™ 68 Pro is an ISO 68 pure polyol ester made from mixed pentaerythritols with saturated fatty acids for maximum stability. CalEster™ Synthetic Polyol Ester Calumet Specialty Products Partners, L.P. Offers a complete line of high purity Synthetic Polyol Ester for use in high performance lubricant applications. With over 50 years of experience in manufacturing Synthetic Polyol Ester, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

Fluoro GT 105 is a 5 micron polytetrafluoroethylene (PTFE) micropowder. Fluoro GT designates a series of PTFE micro powders made from highly crystalline, sintered PTFE. These products can be added with minimal to no change to the viscosity of the system. They impart excellent lubricity and wear resistance.

NanoFLON® PIB25 is a stable, 25% dispersion of premium grade submicron polytetrafluoroethylene (PTFE) in poly-isobutene and ester oil. These products are ideal for use in extreme pressure, anti-wear and low friction lubricants under high or low temperatures.

NEWPOL 75H-90000 is polyalkylene glycol-type lubricant used for lithium soap grease as well as high temperature grease compounded with graphite or molybdenum sulfide. It is soluble in water.

Fluoro GT 130 is a 25-35 micron powder. Fluoro GT designates a series of PTFE micro powders made from highly crystalline, sintered PTFE. These products can be added with minimal to no change to the viscosity of the system. They impart excellent lubricity and wear resistance.

Glylub 34 is designed to offer excellent performance at very low temperature with a high lubricity performance above all in two stroke engines. They are formulated particularly for low temperature performances. Obtained from sebacic acid and linear or branched alcohol are designed for 2/4 stroke engine lubricants and hydraulic fluids.

FUEL SHIELD™ is the ultimate fuel system performance enhancer and fuel lubricity improver. Utilizing the most Advanced Boundary Film (ABF) Technology,it provides maximum lubrication in gasoline and diesel fuel systems. Fuel Shield™ is especially formulated to help protect against accelerated wear caused from Ultra Low Sulfur Diesel (ULSD) fuels. Fuel Shield thoroughly cleans the entire fuel system while reducing emissions, increasing fuel mileage, improving power, performance, in addition to extending the life of fuel injectors, injection pumps and fuel filter life. Other benefits include the elimination of gum and resin deposits, increased fuel combustion efficiency, improved fuel atomization, removes water and fights corrosion in the fuel system.

ROX® MF 1600 Water In Fuel Emulsifier is most effective for land-based diesel, marine MGO and hybrid fuels. It is designed to maximize the emulsification effect up to 10 times of the original product and is implemented as an alternative fuel to reduce NOx emissions and particulate matter significantly.

ROX® MF 2900 ULSMGO LUBRICITY IMPROVER is specifically formulated to improve the lubricity of Ultra Low Sulfur MGO and other middle distillates and hybrid fuels with poor lubricity. Fuels that do not have sufficient lubricity will lead to greater wear and tear on engine equipment, fuel pumps and injection equipment. ULSMGO Lubricity Improver (ROX® MF 2900) is a highly effective way of improving the lubricity of the fuel, measurable through the HFRR test procedure. Greater longevity of engine components and reduced maintenance costs will be observed.

At RB Products, we supply an extensive line of additive componentry, designed to enhance end-product specifications. When incorporated into a chosen base oil mixture, additives can provide the following performance enhancements: Anti-Corrosion; Anti-Wear; Extreme Pressure; Lubricity; Anti-Oxidation; Viscosity Improvement ; Increased Solubility As part of our Additive Componentry line, we offer Branched Alkyl Benzene (RB BAB), an Alkylate manufactured from a branched alkylbenzene.

Glylub 54 is designed to offer excellent performance at very low temperature with a high lubricity performance above all in two stroke engines. They are formulated particularly for low temperature performances. Obtained from sebacic acid and linear or branched alcohol are designed for 2/4 stroke engine lubricants and hydraulic fluids.

Power Research PRI-D is a super concentrated, complete diesel fuel treatment for shipping, refiners, suppliers and commercial diesel consumers that improves all standard distillate grades and is especially formulated to overcome the degraded lubricity and thermal stability characteristics of severely hydrotreated 0.1% MGO marine fuels, VLSFO and ultra-low sulfur (ULSD) diesel fuels.

Glylub 24 is designed to offer excellent performance at very low temperature with a high lubricity performance above all in two stroke engines. They are formulated particularly for low temperature performances. Obtained from sebacic acid and linear or branched alcohol are designed for 2/4 stroke engine lubricants and hydraulic fluids.

Energy Technology Group Air Brake System Antifreeze is a methanol-based air line/ air brake anti-freeze for alcohol evaporator and injector systems. It contains corrosion inhibitor and lubricity agent to protect valves and seals.