Products in Transmission Fluids: Industrial Lubricants

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DOA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GTL is a fully saturated glycerol triester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9515 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range and good oxidative stability.

LUBRICIT GMO is a glycerol monooleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT 9505 is a dimerate fluid that is used as a synthetic base oil for formulations requiring good low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DINA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DTDA/1 is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHD is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GMO-VEG is a glycerol monooleate derived from vegetable fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9522 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester designed for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. LEXOLUBE CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. LEXOLUBE CQ-3000 is a USDA Certified Biobased Product with high biodegradability that is also on the LuSC list, making it a great choice for Vessel General Permit (VGP) or EcoLabel products.

LUBRICIT GMT is a glycerol mono/diester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 2-EHD/1 is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DTDA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GTO is a glycerol trioleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT DIDS is a sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

RIANOX® 116 is an antioxidant for lubricating oil or grease

FOAM BAN® 149 is a defoamer formulated with silicone compounds dispersed in synthetic hydrocarbons for use in non-aqueous industrial lubricants. The main areas of applications are hydraulic oils and gear oils.

FOAM BAN 155 is a silicone-polyacrylate hybrid defoamer that provides excellent defoaming and air release properties in non-aqueous industrial lubricants. The areas of application include (but are not limited to) non-aqueous grinding fluids, cutting oils, hydraulic oils and gear oils.