Products in Other Automotive & Transportation Applications: Polyesters

Cuyahoga Plastics EB7000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form.

Cuyahoga Plastics AB5000 is a UV resistant, flame retardant, glass-reinforced polyester thermoset suitable for outdoor applications. Compression, transfer, and injection molding grades are available. It is currently supplied in bulk form, cut preforms, and box length extrusions.

Cuyahoga Plastics EB3000-2 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms and box length extrusions.

Cuyahoga Plastics EB5000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms, and box length extrusions.

Cuyahoga Plastics AB4000 is a mineral-filled, glass fiber reinforced polyester thermoset suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms & box length extrusions.

ROMILOY® 5720/01 is PC/PBT, injection molding grade, easy-flowing, high-impact, UV stabilized.

TİSESTER F 20D03 K02 R01 is a PBT, 20% Glass Fiber Reinforced, Heat Stabilized, Natural.

CompaDur® 121 GF 10 FR (011) is a PBT, injection molding grade, 10% glass fibers, heat-stabilized, flame retardant, good flow ability and strength.

CompaDur® 121 GF 20 (004) is a PBT, injection molding grade, non-reinforced, high viscosity, easy release.

TİSESTER F 30D03 F01 K02 HS R01 is a PBT, 30% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

ROMILOY® 2720 is PC/PET, injection molding grade, easy-flowing, impact-resistant, high heat resistance.

PEPLPET B 101C PET is a Pet Bottle Grade.

CompaDur® 121 GK 20 (008) is a PBT, injection molding grade, 20% glass beads, heat stabilized, low warp, good surface.

CompaDur® 121 GF 30 FR (013) is a PBT, injection molding grade, 30% glass fibers, heat-stabilized, flame retardant, high stiffness and strength.

Selenis Maven MS 105 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 2 mm, without crystallization occurring. Selenis Maven MS 105 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

TRI-REZ® Polyol 1030-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

TİSESTER F 30D05 R01 is a PBT, 30% Glass Bead Reinforced, Natural.

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

Plastiverd Plastiverd Design is copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has been specially designed for thick wall applications. This grade presents a higher IV and outstanding mechanical properties.

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

TİSESTER® F 10D03 R01 is a PBT, 10% Glass Fiber Reinforced, Natural

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

ROMILOY® 5240 GF20 is ASA/PBT, injection molding grade, 20% glass fiber reinforced, high dimensional stability, high surface quality.

CompaDur® 121 GF 20 LW (006) is a PBT, injection molding grade, 20% glass fiber, heat stabilized, low warp, balanced flow ability and strength.

ROMILOY® 5730/01 is PC/PBT, injection molding grade, high-impact.

Selenis Maven NF 421 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 421 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 421 is recommended when a very demanding performance and outstanding toughness are essential, such as, ultimate impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 421 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 421 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 421 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

CompaDur® 151 FR (010) is a PBT, injection molding grade, non-reinforced, heat-stabilized, flame retardant.

TİSESTER® F 20D03 F01 K02 HS R01 is a PBT, 20% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural