Products in Other Automotive & Transportation Applications: Polyolef...

Copolymer PP, impact modified. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP, high fluidity. For SDS, please contact Addiplast Group using the 'Request Document' button.

PP copolymer, impact modified, high fluidity. For SDS, please contact Addiplast Group using the 'Request Document' button.

ESD protection copolymer PP. Resistivity 104. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP, mineral loaded, impact modified, UV stabilized, low emission. For SDS, please contact Addiplast Group using the 'Request Document' button.

ESD protection, copolymer PP. Resistivity 108. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP, mineral filled, UV stabilised for interior automotive. For SDS, please contact Addiplast Group using the 'Request Document' button.

Impact modified copolymer PP. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP, nucleated. For SDS, please contact Addiplast Group using the 'Request Document' button.

Black carbon ESD, resistivity 103 PP compound, Very high electrical properties. For SDS, please contact Addiplast Group using the 'Request Document' button.

ESD protection, copolymer PP. Resistivity 104. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP, mineral filled, UV stabilised for interior automotive. For SDS, please contact Addiplast Group using the 'Request Document' button.

Copolymer PP, glass fibers reinforced, UV stabilised, improved scratch resistance. For SDS, please contact Addiplast Group using the 'Request Document' button.

Corex Polypropylene honeycomb is the idealcomponent for any lightweight assembly. It is extremely light but very strong. It provides high stability at a low weight and is resistant to both heat and corrosion.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Teldene® H03ML is used as injection molding for house wares, toys, small appliance parts, Raffia and automotive compounding.

Armlen PP MF 30-3IM is a 30% mineral filled, impact modified polypropylene. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in natural, light beige, beige-yellow, beige-gray and chocolate colors.

Polifil® C series compounds are homopolymer polypropylene resins reinforced with fine particle size calcium carbonate. They combine high impact with stiffness, good colorability, resistance to environmental stress-cracking, good surface, and low mold shrinkage. Polifil® C products in the 20 to 40% range are UL94 HB rated. These compounds are used in appliances, electrical components, housewares, toys, automotive, and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Gichem DP08/TD Polypropylene is PP 40% talc, high dimensional and thermal stability, detergent stabilized. High injection speed.

Lu'An Jietonda New Material SA501 is a Film hardening agent for powder coatings.Jietonda® SA501 is a modified PTFE wax used for powder coatings to increase hardness and smoothness of film.

Armlen PP MF 40-1 is a 40% mineral filled polypropylene, modified. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in natural, brown, gray and black colors.

Armlen PP MD 40-5TS is a 40% mineral filled thermos-stabilized polypropylene. This material displays high resistance to impact loads, good rigidity, and dimensional stability. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment etc. Available in white color.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes.

Armlen PP-2FRX is a low-combustible polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation etc. Available in black color.

Armlen PP MF 30-1 is a 30% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in white, blue and black.

PBS1200J is high impact copolymer polypropylene with extra high izod impact, Superior low temperature drop impact which is used in automotive, compounding.

Gichem DG04 Polypropylene is PP 20% talc, good stiffness, High Injection Speed.

Trecora Chemical CHU610 is a polyethylene wax. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CHU610 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Gichem CG05/KM Polypropylene is PP copolymer, 25% talc, high impact resistance.

Inhance Fluoro-Seal UH-1250 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

JSR EP21 is low filler loading and good extrusion properties.

Armlen PP MF 25-1 is a 25% mineral filled polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in natural, gray and black colors.

Piolen® T20A15 also known as PP-Homo TV20 is a natural / black type.

ANSALENE PP AT A02 000 0000 AT is Polypropylene Homopolymer with anti-static property for injection molding.

Inhance Fluoro-Seal UH-1700 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.