Products in Other Automotive & Transportation Applications: Polyolef...

Revolve N-131 is a Super-Linear® rotational molding grade designed to provide high stiffness without compromising impact properties which makes the grade ideal for any leisure marine products. The grade is suitable for multi-layer applications in combination with foam.

TABOREN® PH 22 B 25 is a PP homopolymer, Filler: Barium Sulfate, Stabilization: Basic antioxidant.

TABOREN® PC 72 G 10 is a PP copolymer, Filler: Glass fibers, Stabilization: Basic antioxidant.

Trecora Chemical OX-7 is an oxidized polyethylene wax. It is easily emulsified. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-7 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Piolen® T20A43 also known as PP-Copo TV20 is a natural type polypropylene.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Polifil® GFPP series compounds are homopolymer polypropylene resins reinforced with glass fibers. They provide high impact with increased strength, stiffness, surface hardness, and higher continuous temperature. Other benefits include reduced distortion under long-term stress. These compounds are used in appliances, electrical components, automotive and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Armlen PP MD 40-11TS is a 40% mineral filled, thermostabilized polypropylene. This material displays high mechanical and electrical properties; is resilient to cold and hot water, alkali, acids and detergents, organic polar solvents (acetone, spirits etc.), benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in white color.

Polypropylene filled with 20% Calcium Carbonate, impact resistant. Main features: High impact resistance, easy to demould, intended for the manufacture of thin-walled products. Available in various colors. Application: plinth siding panels.

Teldene® H03ML is used as injection molding for house wares, toys, small appliance parts, Raffia and automotive compounding.

JSR EP27 is typical High Mooney Medium ENB content.

Armlen PP GF 20-2LS is a 20% glass fiber, light-stabilized polypropylene. This material displays high mechanical, thermophysical and dielectric properties; material is resilient to hot and cold water, to nonpolar solvents and rigid environments (kerosene, gasoline, benzene etc.) and alkali and acids. Exploitation benefits: improved impact strength, heat- and cold-resistance, good appearance. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Available in gray color.

Armlen PP MF 30-3IM is a 30% mineral filled, impact modified polypropylene. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in natural, light beige, beige-yellow, beige-gray and chocolate colors.

Polifil® C series compounds are homopolymer polypropylene resins reinforced with fine particle size calcium carbonate. They combine high impact with stiffness, good colorability, resistance to environmental stress-cracking, good surface, and low mold shrinkage. Polifil® C products in the 20 to 40% range are UL94 HB rated. These compounds are used in appliances, electrical components, housewares, toys, automotive, and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Armlen PP GF MD 30-1 is a 30% glass fiber, thermostabilized, hydrolysis resilient polypropylene. This material displays high mechanical, thermophysical and dielectric properties; is resilient to cold and hot water, alkali, acids, detergents (acetone, spirits etc.), and benzene fumes. This material is compliant with Europesecurity requirements. Designed for injection molding of items and parts for wide solutions range: construction, electronics, auto industry, machine engineering, aviation, fire safety equipment, household, transportation etc. Including products exploited outdoor in natural light, precipitation and other weather factors. Available in light-gray color.

Gichem DPV35/CE Polypropylene is PP 40% with talc and glass fiber filled, chemically coupled, esthetic. High Injection Speed.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

JSR EP25 is high speed curing and high filler loading,good extrusion.

Inhance Fluoro-Seal UH-1045 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Piolen® T10H19 also known as PP-Homo TV10 is a natural heat stabilized.

Polifil® GFPP series compounds are homopolymer polypropylene resins reinforced with glass fibers. They provide high impact with increased strength, stiffness, surface hardness, and higher continuous temperature. Other benefits include reduced distortion under long-term stress. These compounds are used in appliances, electrical components, automotive and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Trecora Chemical CWP500 is a polyethylene wax. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Imparts a non-stick character to a coating that decreases the tendency for blocking. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP500 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU561 is a polyethylene wax. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax.

Plascore Infusion Grade PP Honeycomb features a composite surfacing material that is compatible with most laminating resins. Infusion Grade PP Honeycomb is designed specifically for optimum performance in Lite RTM and Infusion Processes. Playing a significant in role in composite products for the marine, wind energy and transportation markets, Infusion Grade PP Honeycomb is a preferred core in incredibly strong and stiff sandwich structures made with resin and reinforcing fibers. Lightweight, low in density and very cost-effective, Infusion Grade PP Honeycomb gives composite manufacturers the ability to deliver cost-effective sandwich structures to customers where high stiffness and low weight are design priorities.

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Armlen PP MF 40-2M is a 40% mineral filled polypropylene with improved impact strength and frost resistance. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in natural and black colors.

A 40% mineral filled, thermostabilized polypropylene. This material displays high resilience to impact, good rigidity, dimensional stability. This material is compliant with European safety requirements. Available in white color.

Armlen PP-1FRX is a low-combustible polypropylene. Designed for injection molding and injection molding or extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation and etc. Available in black color.

Piolen® T20A15 also known as PP-Homo TV20 is a natural / black type.

Piolen® T40A15 also known as PP-Homo TV40 is a natural polypropylene type.

Polifil® GFPP series compounds are homopolymer polypropylene resins reinforced with glass fibers. They provide high impact with increased strength, stiffness, surface hardness, and higher continuous temperature. Other benefits include reduced distortion under long-term stress. These compounds are used in appliances, electrical components, automotive and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Armlen PP MF 35-1 is a 35% mineral filled polypropylene. This material displays high mechanical properties, low buckling and shrinkage parameters, it may be applied as substitution of metals, thermosetting polymers and other thermoplastics (polyamides, polyester, ABS plastics) in technical products, including those exploited in chemically aggressive conditions, and general items. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in black color.

Armlen PP MF 25-1 is a 25% mineral filled polypropylene. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in natural, gray and black colors.