Products in Other Automotive & Transportation Applications: Chemical...

DBNPG is a thermosetting polyester resins. It can be formulated over a wide range of compositions to provide a broader selection of resin properties than those available with anhydride flame retardant. Resins formulated with it have high chemical and flame resistance minimal thermal discoloration and excellent light stability The high bromine content of it and its ready reaction into polyurethanes make it suitable for use in rigid polyurethane foams, UPE,PU rigid foams.

AKSACA™ AC 2101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

Aronkasei AR-710 is styrene type elastomer AR.

AKSACA™ 12K A-49 is a High Quality Carbon Fiber.

G-PAEK™ 1100ESG is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for stock shapes extrusion, easy flow, Beige in color.

Polifil® GFN/MRN 6/6 reinforced series of compounds offer superior strength, rigidity and creep resistance. Glass fibers provide excellent thermal and dimensional stability while maintaining good heat and chemical resistance.

Maven NF 300 is an economical solution for the extrusion of heavy gage sheet that allows for high thicknesses without crystallization occurring. Selenis Maven NF 300 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 300 is a very economical polymer for this highly competitive market environment. In competition with other polymers frequently used in the heavy gage sheet business such as Polycarbonate, PMMA and Polystyrene Selenis Maven NF 300 is sensibly priced while featuring excellent clarity, good surface gloss, and a practically neutral edge color. 

G-PAEK™ 1400P G is Ultra High performance thermoplastic polymer, unfilled Polyether Ketone, semi crystalline, coarse powder for extrusion compounding, high flow, FDA food contact compliant, color natural white.

G-PAEK™ 1200G is Ultra high Performance thermoplastic polymer, virgin, semicrytalline granules suitable for injection molding, easy flow, Beige in color.

TİSESTER F UNR F01 K04 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Impact Modified, Natural.

Aronkasei AR-720 is styrene type elastomer AR.

Selenis Maven MS 105 is a copolyester with a slow crystallization rate and is suitable for the extrusion of heavy gage sheets, allowing for thicknesses up to 2 mm, without crystallization occurring. Selenis Maven MS 105 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge color are required.

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gage sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge color are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gaged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

Ketoprix™ EKT23G3C3L resins are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also added to assist in injection molding.

Goodyear Rubber Company of So. California EPDM polymer (Ethylene Propylene Diene Monomer rubber) is a type of synthetic elastomer characterized by wide range applications. Main properties of EPDM are its outstanding heat, ozone and weather resistance. EPDM exhibits satisfactory compatibility with hydraulic fluids, ketones, hot and cold water and alkalis.

Duresco NU 505 L is a Mineral filled epoxy molding compound with high temperature resistance and very good dimensional stability. Low and isotropic thermal expansion.

Prime ABS Weather-X 200 is an acrylic capped co extruded ABS sheet, which can be produced as a two or three multilayer composite. The acrylic cap imparts a very high gloss, vibrant colors with superior depth of image, excellent UV protection, chemical resistance, toughness and excellent formability.

Aronkasei AR-731 is styrene type elastomer AR.

Todos Chemical TODOTEX EBF is used in polyester and its blended fabrics brightening, and applicable in both exhaust and padding dyeing, this product is of high light fastness (grade 7-8), excellent stability against acid, alkali, hard water, peroxide and chlorite bleaching.

Prime ABS Weather-X 401 Film is a thin gage extruded acrylic (PMMA) protective cap film that can be laminated to plastic substrates, such as ABS, HIPS, and PMMA. Its exceptional UV protection extends the indoor and outdoor durability of the base sheet. Extruded acrylic film also protects the substrate from yellowing and fading. Its consistent high gloss outshines the finish of brown acrylic films. This tough film also provides abrasion resistance, mildew and fungus resistance, as well as, protection from chemical spillage.

G-PAEK™ 1120SFE is Ultra High Performance Thermoplastic polymer, 20% PTFE blended in Polyether Ketone, semi-crystalline granules suitable for injection molding, easy flow, light Beige in color.

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

TİSESTER F 25D03 F01 K02 HS R01 is a PBT, 25% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

Polifil® GFN/MRN 6/6 reinforced series of compounds offer superior strength, rigidity and creep resistance. Glass fibers provide excellent thermal and dimensional stability while maintaining good heat and chemical resistance. Polifil® GFN/MRN are excellent candidates for bike components and fuel caps, as well as other automotive components. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. Polifil® GFPPCC products are UL94 HB rated. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

G-PAEK™ 1200P G is Ultra High performance thermoplastic polymer, unreinforced Polyether Ketone, semi crystalline, powder for extrusion compounding, standard flow, food contact compliant, color natural white.

G-PAEK™ 1100G is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for injection molding, easy flow, Beige in color.

KYDEX® 100 is available in a wide range of standard and custom colors, textures, and sheet sizes. It is Underwriters Laboratories, Inc® recognized for UL Std 94 V-0, 5V and has 961 J/m (18 ft-lbs/in) Notched Izod impact resistance. A high impact, fire-rated alloy sheet that is tough, durable, proprietary, that brings new dimensions to thermoformers.

AKSACA™ 12K A-42 is a High Quality Carbon Fiber.

Aronkasei AR-791 is styrene type elastomer AR.

By mixing several polymers together, JSR has lined up polymeric materials that display new characteristics. Products that have various functions, such as superior heat resistance and chemical resistance are available at JSR.

AKSACA™ AC 0101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

AKSACA™ 24K A-42 is a High Quality Carbon Fiber.

TİSESTER F 30D05 R01 is a PBT, 30% Glass Bead Reinforced, Natural.