Products in Other Automotive & Transportation Applications: Foaming ...

Cel-Span® CFA 897 is a 40% active endothermic foaming agent concentrates recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 897 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications.

Sinobase Polymers Chemical AC-02 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Cel-Span® CFA 200 is a 50% active Binary foaming agent specially formulated with activators and self-nucleating agents that contribute to uniform cell formation and smooth surfaces. CelSpan® CFA 200 concentrate releases mostly N2 and CO2 gasses upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, similar in color to endothermic chemical foaming agents. Cel-Span® CFA 200 is recommended for extrusion, injection, and structural molding of any kind of thermoplastics, except polycarbonate and thermoplastic polyesters.

Polytrans AZODICARBONAMIDE is AC Blowing Agent/ Blowing Agent ADC.

Sinobase Polymers Chemical AC-04 is a slightly yellowish powder that is stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water and there is no toxicity or contamination..

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

Sinobase Polymers Chemical AC-05 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.

Otsuka Chemical AZ H-115E is developed in order to solve these problems and to improve the overall efficiency of the foaming agent. Otsuka Chemical is ready to supply their variety of foaming agents for objected plastics, rubber, or ways of molding. Micro-fine foaming agent can easily worsen the working environment as well as making automatic weighing and supply difficult. Molding is also a concern in regards to worsening the foamed product.

Sinobase Polymers Chemical AC-03 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

New Particle Chemical Colors Corp. 7300 FOAMING PLASTIC MASTERBATCH is a most widely used Nitrogen foaming Masterbatch For Foamed Plastics. Foaming plastic masterbatch 7300 is particularly adapted for use in unicellular products where low gas loss be diffusion is required since it blows by releasing nitrogen.It is non-odorous in itself and imparts no odor to the finished products for which it is used and may be used in white or light colored compounds without the objectionable discoloration and staining obtained with many organic chemicals although it is a yellow pellet, the decomposition residue by heat is white. 7300 is broadly used blowing agent for most polymers processing, and should not be used with beryllium or copper tooling in injection molding structural foam.

Sinobase Polymers Chemical AC-01 is a slightly yellowish powder. Which is stable at room temperature and is soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination..

Cel-Span® CFA 899 is a 40% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899 is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Cel-Span® CFA 844 is a highly loaded 80% active endothermic foaming agent formulated for applications with high gas requirements. Cel-Span® CFA 844 concentrate releases carbon dioxide gas upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, a color common to endothermic chemical foaming agents.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

Sinobase Polymers Chemical ACP-W Blowing Agent is a mixture of AC, DPT blowing agents and other additives. Foaming at low temperature and giving stable performance.