Suppliers in Automotive & Transportation

Mamta Polycoats is a leading manufacturer and exporter of non-toxic and eco-friendly Citrate Acid Esters (Triethyl Citrate, Tributyl Citrate, Acetyl Triethyl Citrate, Acetyl Tributyl Citrate, Acetyl Triethyl Citrate), Adipate Esters and other high-quality chemical ingredients for Cosmetics, Personal Care, Food & Beverages, Flavors & Fragrances, Pharmaceuticals, and other industrial applications. Founded in 2007 by a team of scientists and entrepreneurs with over three decades’ experience in developing speciality chemicals, Mamta Polycoats is one of the fastest-growing innovators and suppliers of high-quality chemical ingredients to the world today

Astron Zircon Pvt. Ltd. by an industrialist with vast experience in ceramic industry and vision for global quality and consistency. Shear hard work speaks itself and within a short span the Astron Zircon Pvt. Ltd. has become a flagship of group of different industries engaged in manufacturing different products including Zinc Oxide, Ceramic Glaze Mixture Frits, Sodium Silicate and Glass Bottles.

We add the “performance” to a vast variety of products that are part of our daily lives, from the car you drive to the chips in your computer. Chances are, not a day goes by that you do not use a product that contains or has been manufactured using a King additive. While our additive functions are technical by nature, in short these specialty chemicals impart desirable, value-added properties to the end uses they are apart of. Whether a King catalyst used to cure an automotive coating while saving energy or a King rust preventive extending a lubricant’s life, they indeed add the performance that a consumer expects from their product choices. Often used at levels as low as parts per million, King additives, are an integral component to formulations of some of the biggest names in the chemical, rubber and oil industries worldwide. While many have been loyal customers for decades, we are constantly challenged by them and others to develop new products that provide even higher standards of performance. It is this challenge of providing innovative high performance additives that drives our business

"Maverick Corporation is recognized throughout the world as a leading expert in high temperature polyimide composites. Located near Cincinnati, OH USA Maverick is focused on delivering the highest temperature, best performing polyimide products in the market. We are an agile, high-tech company operating on a simple promise: Let Innovation Run Wild! Maverick Corporation was founded in 1993 by Dr. Robert Gray and Mr. Eric Collins. The company’s cornerstones are research, development and large volume manufacturing of polyimide resins for high temperature environments. Maverick products are manufactured using green, non-toxic formulations with service temperatures from 400°F (204°C) to over 700°F (371°C). Our formulations include high temperature resin systems. Maverick's resin products are available for purchase as follows Prepregs, Adhesives, and Thermal Barrier Prepregs are available from our partner, Renegade Materials Corporation. Our RTM systems are available direct from Maverick Corporation; Contact Us. Our company has a proven history of developing advanced materials and transitioning technologies into commercial applications. We team with our customers to engineer high tech solutions tailored to their needs. We set the industry standard for quality, on time delivery and customer service. Our companies are certified State of Ohio small businesses and have earned the most current ISO and AS9100 accreditations. Maverick continues to “raise the bar” by exceeding customer expectations."

"Kandui Industries is a globally trusted and leading manufacturer of masterbatches with an extensive reach across the globe. Established in 2006, Kandui offers world-class quality products and services to its customers thus making it one of the most preferred names in masterbatch manufacturing. The company offers a combination of state-of-the art extruders, well-equipped laboratory, reliable quality control systems, well-qualified managers, and a smart workforce.With two world class facilities based in Daman, 140 kms from the commercial capital Mumbai, Kandui is equipped with state-of-the-art technology. The company's annual manufacturing capacity is over 45000MT, with plans to expand further to 60000MT in the coming years. Our Mission is to achieve prominent presence in industry through continuous product and technical innovation, customer orientation and a focus on cost effectiveness, quality and services. KIPL firmly believes in “To give the customer the best quality ‘FIRST TIME’, ‘EVERY TIME’ & ‘ON TIME’. Our vision is to become the most trusted & preferred solution/material provider for our customers in the plastics & textile sector. We constantly strive to achieve excellence by creating the most innovative and cost-effective masterbatches. We believe in expanding values and undertaking global challenges to provide future-ready solutions to the industry."

Sekisui Specialty Chemicals has been producing high quality Polyvinyl Alcohol polymers and copolymers since 1959. Selvol Polyvinyl Alcohol (PVOH) is a non-toxic, environmentally friendly water soluble polymer. All Selvol products are produced at one of Sekisuis three ISO certified manufacturing plants. Our are trusted by global customers manufacturing products for paper, adhesives, personal care, oil and gas, emulsions, construction, textiles, and other specialty applications. We offer a comprehensive line of Selvol products to meet the exact needs of customers. Each lot is meticulously tested to ensure high quality, tight specifications, and optimal performance

Orion Engineered Carbons is a leading worldwide supplier of carbon black. We produce a broad range of carbon blacks that include high-performance specialty gas blacks, acetylene blacks, furnace blacks, lamp blacks, thermal blacks and other carbon blacks that tint, colorize and enhance the performance of polymers, plastics, paints and coatings, inks and toners, textile fibers, adhesives and sealants, tires, and mechanical rubber goods such as automotive belts and hoses. Orion operates 14 global production sites and has approximately 1,425 employees worldwide.

Manner Polymers is a privately held company based in McKinney, Texas. The company has increased its footprint to become one of the five largest flexible PVC compounders in North America since its inception in California more than 60 years ago. Manner’s culture is marked by a collaborative, consistent and detailed focus on creating superior outcomes for our customers and their end markets.

"MARTE SpA is a chemical company producing ORTHOPHTHALIC, ISOPHTHALIC, DCPD, FLAME RETARDANT unsaturated polyester resins intended for the composite product market. The sectors in which ARES ® polyester resins are used are: manual and continuous laminates, buttons, abrasive cones, sanitary ware, shower trays, whirlpool tubs, cold rooms, pipes and tanks, pultruded parts, moldings, pastes and gelcoats, agglomerates, etc."

Founded in 1980, Genesee Polymers manufactures silicone-based products for various industrial applications. These include mold release agents, electronics, pharmaceuticals, cosmetics, paints, coatings, paper treatment, printing inks, and textile softeners. The company is located in Burton, MI, and ships directly from there. Genesee Polymers' focus is on developing technologically advanced polymers and formulations based on customer requirements, delivering them on time for the benefit of customers, shareholders, employees, and suppliers. They prioritize research and development and continuous process improvement to ensure innovation, quality, and efficiency.

Flow Polymers is a leader in compatibilizing additives and dispersions for rubber and plastics. With almost 30 years of experience, they provide customer service, quick sample turnaround, innovative products, and consistent quality. Their products are compliant with the most stringent regulations, ensuring customer satisfaction. Flow Polymers is the go-to company for customers seeking a solution to their process and handling issues.

Advanced Honeycomb Technologies manufactures a wide range of honeycomb cores for aerospace and commercial applications. Advanced Honeycomb Technologies honeycomb meets or exceeds contractor specifications, and it is used in products as diverse as commercial aircraft, communications and transportation equipment, space vehicles, construction materials and recreational and sporting goods.

STIRRI is a customer-focused organization that manufactures high-quality solder chemicals for various customers, including OEM/ODM, professional users, and soldering enthusiasts. They offer a wide range of soldering essentials such as Solder Paste, Tacky Paste Flux, Conformal Coating, and Cleaning Solutions, all made in the USA to the highest purity and quality standards. In addition to these products, STIRRI also provides Solder Wire, BGA, Raw Materials, and Dispensing Components, making them a convenient one-stop shopping solution for all soldering needs. Let's build a Cyborg!

APEC, established in 1996, specializes in R&D and manufacture of eco-friendly waterborne acrylic emulsion adhesives, PSAs (Pressure Sensitive Adhesives), waterborne PUD (Polyurethane Dispersion) and AUD (Acrylic Urethane Dispersion). With its mission to contribute to human health and natural environment conservation by endeavoring to convert solvent-based emulsion adhesives into water-based ones, APEC has been committed to creating customer value and grown with its customers by collaborated, intensive R&D activities for the last two decades. Our capacity for agile renewal coupled with innovative corporate culture and supportive leadership enables us to offer our customers tailor-made, environment-friendly products that help them meet their local and global standards and responsibilities with high performance products. Our technological capabilities meet increasing customer demand for high quality and sustainable options. We collaborate and partner with you to understand your needs and recommend the right solutions.

Jinan TaiXing Fine Chemicals Co., Ltd., is a High-Tech enterprise which is established in 1998, professional in R & D, manufacturing and sales of Environment-friendly halogen-free flame retardants. We develop seven product series with 70,000 tons annual output capacity of flame retardants, including 20,000 tons ultrafine Aluminum hydroxide, zinc borate, ammonium polyphosphate, Melamine Cyanurate (MCA), aluminum hydroxide, magnesium hydroxide, flame retardant master batch and specialized flame retardant for GF reinforced PBT, PA and TPU, widely used in engineering-plastics, rubber, tube and belt, electric & electronics, PVC film, low smoke halogen-free wire and cable, building materials etc.

Polímeros Mexicanos is the most important specialized company in the world in the production of compounds for the rotational molding industry. From our invaluable human capital, through the best products on the market, our facilities with state-of-the-art technology, the team of experts and research, to our excellent service and personalized attention, they are patents that make Polímeros Mexicanos, a leading global company. We are the only company in the world, dedicated 100% to the manufacture of compounds for the Rotomolding industry, serving clients in more than 100 cities, in more than 30 countries, around the world.

Kays Kft. is a 100% Hungarian family-owned company committed to sustainability and efficient use of resources. We have been in close cooperation with the German Hapego Plastics GmbH since 2014 and are present in many areas of the German market. We are members of the Hungarian Plastic Industry Association, the Magyarok a Piacon Club, the German-Hungarian Chamber of Industry and Commerce and the Győr-Moson-Sopron County Chamber of Commerce and Industry. Our mission is to promote environmental consciousness in all our operations.

Headquartered in Fort Worth, Texas, with facilities in North America, Europe and Asia, KMG manufactures, formulates and globally distributes specialty chemicals for the Semiconductor, Industrial Wood Preservation, and Pipeline and Energy markets.

"Our years of experience show that most companies will check with their existing suppliers if they have a problem with their compounds. In many cases, however, there is no solution on the market for complex requirements. For this reason, we develop customer-specific and exclusive compounds in cooperation with our partner company Lapp Engineering AG . These help you to save costs, increase the margins of your products, open up new business areas and maintain existing business areas. "

HPL is one of the largest petrochemical companies in India with a total capacity equivalent to 7,00,000 TPA of ethylene. Process technologies for various manufacturing plants have been selected from internationally renowned vendors with an aim to produce world-class hyphenated products with excellent safety and environment considerations.

Barrday is a leading advanced material solutions company with an international manufacturing and sales presence. Our product lines encompass applications for the composite and protective markets. Our success is based on developing technologically advanced fiber reinforcement, prepreg and other material solutions for our customers in the aerospace, defense, industrial, energy and protective markets.

"Triangle Coatings’ business began in 1932 as a small, regional paint manufacturer. We offered users quality coatings, quick service, and immediate access to chemical information and technical advice. As we grew, we established ourselves as a reliable and knowledgeable source for standard and specialty paints and coatings made available in small and large quantities. Today, through our expanded manufacturing facilities and modern laboratories, Triangle Coatings, Inc. offers a full line of Architectural & Decorative Paints, Oil Paints, Concrete Sealers, Industrial Maintenance Coatings, OEM Product Finishes, and Government Specification Coatings. In addition, we offer custom formulation and toll manufacturing for customers with specific demands. An environmentally conscientious company, Triangle Coatings is also responsible for developing an environmentally friendly line of coatings, including High Reflective and Smart Coatings, which help increase the energy efficiency of buildings and other manufacturing and construction projects. As a leader and generous contributor to efforts throughout the industry promoting environmentally responsible manufacturing practices and projects, we continue to research and develop sound practices that mitigate our impact on the environment. You’ll find our coatings on NASA, NATO and National Radio Observatory large antennas; bridges, including the Golden Gate Bridge; refineries, including Chevron Refineries; utility equipment for PG&E; and on thousands of other surfaces for customers around the world. Our coatings cover a wide assortment of substrates and meet global specifications for a variety of customers. Our broad reaching and valued clientele is due in large part to Triangle’s responsive and friendly customer service. Working together in a relaxed family atmosphere, we encourage our employees to go the extra mile for our customers. Our staff is composed of hard-working and talented individuals who pride themselves on manufacturing and shipping only the finest quality paints and coatings.

Aexcel Corporation changed its name in 1988 to establish a new corporate identity and began to focus on developing Traffic Safety Paints. The company moved into a 70,000 square-foot building with a large warehouse in 1989 and experienced rapid growth. In 1993, John S. Milgram was appointed President and the company worked on developing improved Uthane technologies. Powder coatings eventually won the battle, so the company had to seek new products and markets. During the late 1990s, Aexcel's reputation for quality, integrity, and service increased, exemplified by providing Indiana Department of Transportation with 603,000 gallons of on-time and problem-free paints in 1997. From mid-1999 to 2001, the company underwent difficult restructuring.

"The STOCKMEIER Group was founded as a chemical distributor in Bielefeld, Germany in 1920 by August Stockmeier. After his passing, his son, Dr. Jürgen Stockmeier, took over the company later passing the business to his son, Peter Stockmeier. Throughout the company’s years, the group diversified from a strict chemical distributor to also being a manufacturer of urethanes, food aromas and flavorings, coloring products for the paper and textile industry, and solutions for AdBlue® additives. In 1990, Jürgen Stockmeier and Edwin Martinkat began a venture to form STOCKMEIER Urethanes Group, a polyurethane systems house focused on the development and production of coatings, adhesives, sealants, and elastomers. In May of 1991 their hard work and dedication paid off, and the first STOCKMEIER Urethanes site was incorporated in Bielefeld, Germany. Over the next 30 years, the company continued to grow and currently has sites in Germany, France, the United Kingdom, and the United States. "

The Jeco group was founded in 1987. In the past 30 years, Jeco has been adhering to the development philosophy of "contributing to the contribution of human society and creating value for partners", striving to strive for excellence and developing into one of the largest high-performance organic pigment and easy to disperse pigment manufacturers in China. The products include six major colors, such as red, yellow, blue, green, purple and orange, and more than 100 varieties. They are widely used in coatings, ink, plastic, liquid crystal imaging and other industries. The company is headquartered in Hebei Cangzhou port chemical industrial park, covers an area of 400 thousand square meters, with a provincial technology center, the provincial high-tech enterprises, well-known trademarks, brand-name products, China ten famous brand of organic pigments and so on, the establishment of Shanghai Jie Hong new Mstar Technology Ltd in Shanghai, have a wide range of marketing channels in the world. Jie Hong pigment has accumulated many patents, technical advantages and rich experience in the organic pigment industry for many years, especially in the proprietary technology of pigment dispersal, so as to provide users with an applicable, better and precise product experience.

"WSD chemical established in 2000,we are professional engaged in the research, development, production, sale and service of PVC additives。. We are located in Shengzhou City,Zhejiang,China, near to Shanghai, Hangzhou ,Ningbo, YIwu .and have convenient transportation access.Our products have used on big markets,such as South Korea, Vietnam, India, Philippines, Pakistan, Bangladesh,Afghanistan, Qatar, Kuwait, United Arab Emirates, Saudi Arabia, Jordan, Bahrain, South Africa, Madagascar, Ethiopia, Tanzania, Kenya, Burundi, Dominica, Algeria, Peru, Chile, Bolivia, Brazil, Mexico, Uzbekistan, Tajikistan, Belarus, Russia and other countries and regions。"

"Established in 1943, ETNA Products, Inc. is a WBENC-Certified Women’s Business Enterprise manufacturing and distributing metalworking lubricants, coolants, rust preventatives and cleaners to customers across the United States and around the world. Metalworking fluids manufacturers such as ETNA Products, Inc. provide consultative solutions for our customers. Our business growth is due to our commitment to our mission statement: We are committed to manufacturing and distributing high quality metalworking lubricants, coolants, rust preventatives and cleaners that meet and exceed our customers’ needs. In addition, we provide a safe, environmentally friendly working environment for our associates. ETNA Products, Inc. is committed to manufacturing and supplying our customers across the world with high–performing, environmentally sensitive products including neat oils, synthetic oils, and water miscible products including synthetic solutions, semi-synthetics and premium grade soluble oils, rust preventatives, corrosion inhibitors and cleaners. Our sales and technical service teams work in collaboration with our customers to maintain ETNA Products, Inc.’s metalworking lubricants, grinding fluids, rust preventatives and cleaners at peak performance levels. Our technical service sampling and fast reporting of our in-use products results in optimal fluid performance, improved finished part quality and increased profitability"

We design and develop world-class conductive inks for next generation electronics. Considered the expert in next-gen printed electronics, for over twenty years, Austin, Texas, based NovaCentrix is the go-to leader for industry-transforming conductive inks and nanopowders.

Buckeye Polymers Inc. currently provides the polymer molding industry with high quality, competitively priced thermoplastic resins. Buckeye Polymers has multiple manufacturing, sales, and service facilities located throughout the United States and Canada.

"Svenska Aerogel manufactures a unique product – Quartzene® Next Generation Aerogel. Quartzene allows materials to be used in different ways to give them entirely new properties. By adding Quartzene, the end product becomes more efficient by using less material, reducing weight, replacing plastic and saving energy. Svenska Aerogel helps industries to develop new products with properties that shape the future to be more sustainable. Svenska Aerogel’s concept for manufacturing Quartzene is unique and addresses sustainability throughout. To produce Quartzene, natural resources are used – silicon, water and energy in a patented environmentally responsible process. The production is designed in modules to be set up at the customer or in customer-dense areas. Svenska Aerogel has gone from research, via start-up and is now being scaled-up. Today, the company has developed a Svenska Aerogel 2.0 platform with increased production capacity that enables the company to be an industrial partner. The focus today is on the market segments transport, process industry, paper and pulp, as well as real estate and the construction industry. The company has created a customer-centric organization with comprehensive support, international expertise and expanded collaboration with distributors. The objective is to launch new products with Quartzene in selected segments. The company’s factory is situated in Gävle (1 h 30 min from Arlanda airport) with good air, sea and rail connections. The location is well suited with traditionally high competence in materials technology and process industry."

"MotorCarbon was established in Dayton, OH in 1993 with the objective of developing low-cost carbon mesophase materials and a process to mass-produce pre-formed, near-net-shape engine parts made of pure carbon. The principles of MotorCarbon understand the technological aspect of distilling inexpensive slurry oil into petroleum pitch, from which high-value mesophase is derived. Their experience with experimental and mass volume petroleum products, material extraction techniques and carbon research is extensive. MotorCarbon has been awarded several research contracts with the Department of Defense and the Department of Energy as well as engine manufacturers. During the years of development work, it became apparent that, once small carbon parts can be mass-produced cost effectively, virtually every industry would use carbon as their choice material, with an unfathomable market potential..MotorCarbon is a materials development company focused on engineering new processes to convert slurry oil, a common petroleum by-product, into an advanced technology carbon material. The resulting product, Meso-C™ can be utilized as a precursor for high stiffness carbon fibers for aircraft and automobiles, extremely conductive carbon foams for cooling electronics, and revolutionary new 3D printing powders for temperature-stable lightweight parts. MotorCarbon is bringing carbon into everyday life.MotorCarbon’s objective is to create ways to leverage oil as a component of building products versus burning it as bunker fuel. Traditionally, refineries dispose of their slurry oil waste stream as dirty bunker fuel for ocean-going ships. Starting 1 January 2020, the International Maritime Organization (IMO) will restrict sulfur content in bunker fuels to less than 0.5% m/m (mass by mass), down from previous regulations limiting it to 3.5% m/m. As a result, refineries will have to adjust or look for alternatives to selling slurry as fuel. MotorCarbon has the solution."

Swancor was established in 1992, with plants in Nantou, Shanghai, Tianjin, Jiangsu, and Malaysia. Swancor products including environmentally friendly corrosion-resistant vinyl ester resins and special unsaturated polyester resins, wind turbine blade materials such as infusion resin, hand lay-up resin and adhesive, and high-performance fire retardant resins that can be used in railway and transportation application. In order to meet trend of longer and lighter weight for wind blade, Swancor also developed prepreg resin and pultrusion resin for carbon fiber spar caps. Swancor is a technology-oriented company, focusing on innovative research and development, and provides customers with customized total solutions to help customers improve their competitiveness. Swancor fully complies with global quality assurance standard, such as ISO9001, ISO14001 and ISO45001, to bring value to customers and partners, and also gets the certificates from Lloyd’s and DNV.

Energy Technology Group offers a range of high-quality products that improve and enhance various fuel types, including diesel, biodiesel, gasoline, turbine fuels, and heating fuels. With extensive research and development expertise, combined with field experience, the company utilizes the latest technologies to address issues and enhance the characteristics of these fuels. Their products have been proven to correct problems and improve the performance of fuels used in various industries such as automotive, marine, and industrial sectors.

"We have two continuous and six discontinuous production lines at our site in Oelsnitz/Germany. Unique worldwide, this enables us to benefit from the advantages of both manufacturing methods at a single site from a single source. Our expertise of over 60 years in manufacturing and developing glass fibre reinforced plastics, assures our worldwide customers the highest, consistent quality and individual service. OPTIPLAN GmbH is known as an exceptionally innovative company and always a pioneer in new and further developments of our products. The proof for this is demonstrated by the numerous new products and patents. To us, innovation does not only mean the development of new, groundbreaking products, but also equally to continually improve our products, production processes and services, in order to continuously provide our customers with a maximum of market driven solutions. Close contact with our customers and raw material suppliers, in-depth market knowledge along with sound technological competence and close cooperation with scientific research & development organisations form the basis for OPTIPLAN being for many years one of the pioneers in the sector in developing new products and opening up new applications."