Products in Aerospace & Aviation: Rheology Modifier

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

DISPARLON® BB-102 is a thixotropic agent based on an ultra-fine amide wax pre-activated in HAPs free solvents. DISPARLON® BB-102 is a very soft paste designed for easy incorporation by post-addition.

K-FLEX® XM-B301 is a low-viscosity, acetoacetate functional reactive diluent with excellent compatibility with a wide range of resins. It is primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.

DISPARLON® NS-5500 is a post addable hybrid thixotropic agent based on a combination of unique technologies supplied as a free flowing paste. DISPARLON® NS-5500 enables uniform coverage with good gloss, pigment orientation, improved flip/flop, anti-settling and anti-sag properties while keeping viscosity low. This product is especially effective for use in automotive systems with aluminum and wood stains with matting or iron oxide pigments. It is post-addable with low shear.

DISPARLON® PFA-231 is a thixotropic agent in paste form consisting of a specially prepared amide wax activated in aromatic free solvent. Develops an exceptionally strong thixotropic structure for anti-settling and anti-sag properties in a wide variety of applications and resin systems.

Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below. Kraton D1164 PT - supplied as a dusted dense pellet Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1171 P is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied from North America in the form below. Kraton D1171 PT - supplied as a dusted dense pellet Kraton D1171 P can be used as a base material for hot melt adhesives. It may also find use as a base material for compound formulations and as a modifier for bitumen.

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1114 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied from North America in the physical form identified below. Kraton D1114 PT - supplied as a dusted dense pellet Kraton D1114 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1126 P is a clear, radial copolymer based on styrene and isoprene, with a polystyrene content of 21%. In addition, it has a diblock content of 30% and high melt flow. It is supplied from North America in the physical form identified below. Kraton D1126 PT - supplied as a dusted dense pellet Kraton D1126 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1101 J is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from Japan in the physical form(s) identified below. Kraton D1101 JU - supplied as undusted crumb Kraton D1101 JO - supplied as crumb dusted with organic dusting agent Kraton D1101 JSM - supplied as powder dusted with amorphous silica Kraton D1101 J is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D1192 A is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 AT - supplied as porous pellets dusted with talc Kraton D1192 AS - supplied as porous pellets dusted with amorphous silica Kraton D1192 ASM - supplied as powder dusted with amorphous silica Kraton D1192 ATM - supplied as powder dusted with talc for the North American market Kraton D1192 A is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D0246 E is a high vinyl, high diblock SBS polymer with bound styrene of 26% mass. The polymer contains uncoupled, dicoupled, and multi-coupled components. The major component is the uncoupled species. Kraton D0246 ET - supplied as a porous pellet dusted with talc Kraton D0246 E is used as a modifier of bitumen.

CLiQFLOW® 707 is a hydrogenated castor oil based thixotropic additive for solvent-free and non-to low-polar solvent based systems. It imparts a strongly shear thinning flow behavior with excellent sag resistance and good flow and leveling. Anti-settling properties and work ability are also improved with the organic thixotrope.

Kraton D1165 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1165 PT - supplied as a dusted dense pellet Kraton D1165 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Incozol LV is a reactive diluent designed to help producers of polyurethane coatings attain low VOC systems. It is used in the formulation of two component coatings for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, anti-graffiti lacquers and waterproof coatings.

Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP - supplied as dusted dense pellets Kraton D1161 JS - supplied as dusted crumb Kraton D1161 JU - supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton G1643 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from Taiwan in the physical form identified below. Kraton G1643 VS - is supplied as a dusted, dense pellet. Kraton G1643 V is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1162 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from North America in the physical form identified below. Kraton D1162 PT - supplied as a dusted dense pellet Kraton D1162 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

CLiQFLOW® 709 is an amide modified hydrogenated castor oil based thixotropic additive for nonto mid-polar solvent based systems. It imparts a strongly shear thinning flow behavior with excellent sag resistance and good flow and leveling. Anti-settling properties and workability are also improved markedly with the organic thixotrope.

Kraton D-1161 polymer is a clear linear triblock copolymer based on styrene and isoprene, with bound styrene of 15% mass. Kraton D-1161 polymer is used in fomulating adhesives ,sealants and coatings, and may also be used as a modifier of bitumen.