Products in Aerospace & Aviation: Molding Compound

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.

Plenco® 00755 is a melamine-phenolic copolymer molding compound offering excellent electrical and flame resistant properties. UL recognized under component file E40654. 00755 is available only in brown. 00755 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CMG and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 06401 is a glass fiber and mineral filled two-stage phenolic molding compound. UL recognized under component file E40654. 06401 is available in black.

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

Plenco® 06301 is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. 06301 is available in black.

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.

Plenco® 06553 is a mineral and glass fiber reinforced two-stage phenolic molding compound, formulated for dimensional stability, good chemical resistance to brake fluids, such as DOT 3 and 4, and should provide grinding to close tolerances. 06553 is UL recognized under component file E40654. 06553 is available in black. 06553 was qualified under military specification MIL-M 14 (superseded by ASTM D-5948) TYPE MFH and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Plenco® 00714 is a melamine-phenolic copolymer molding compound, offering excellent arc resistance and comparative track index values. UL recognized under component file E40654. 00714 is available in brown. 00714 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) Type CMG and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 06310 is a glass and mineral filled phenolic molding compound offering excellent heat resistance and dimensional stability. 06310 is available in black.

Polynt Group SMC LP 6700 LW is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LP 6700 LW is a low weight compounds and it has been developed for structural parts. SMC LP 6700 LW meets mechanical and thermal properties with reduction weight of the final parts. SMC LP 6700lw is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Toray Toray Cetex® MC1200 is a thermoplastic bulk molding compound (BMC) based upon Cetex TC1200 PEEK thermoplastic uni-directional tape. Toray Cetex® MC1200 is offered on standard-modulus fibers lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product allows complex shapes to be made with varying wall thickness, integrated ribs, and reinforcing structure. Many composite compression molded parts are used to replace metal parts for weight savings or they replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1200-4A, PEEK, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

SMCarbon® 80CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

StarPCS™ SBMC-998 are carbon fiber reinforced molding compounds containing a discontinuous carbon fiber, a specially formulated StarPCSTM polycarbosilane resin, and refractory particulate. SBMC-900 and SBMC-998 can be used in the cured state, but are specifically designed for use as a ceramic matrix composite (CMC) thermal or mechanical structure.

Toray MS-4H is a 25.4 mm (1”) carbon fiber/epoxy resin compression molding system using high strength standardmodulus (HS) carbon fiber. MS-4H is an excellent low-cost, high performance molding compound that has been qualified to military and commercial Applicationss. It has excellent out time stability and processes very well in medium-to-large heavy parts. 138°C (280°F) Fast Cure Standard-Modulus Compression Molding System

HTC™ 9510 is an E-Glass Fiber reinforced Bismaleimide (BMI) ESC® molding compound. It exhibits outstanding elevated temperature characteristics providing greatly extended service temperature range versus epoxy compounds for compression molding applications.

AMC® 8595 (unidrectional) is a unidirectional carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 60K tow.

SMCarbon® 24CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

AMC® 2593 is a chopped carbon fiber reinforced ESC® phenolic molding compound. It is easily moldable and provides parts that are high strength, with high heat resistance, low density and it exhibits low flammability characteristics. The carbon fiber is standard modulus PAN based 3K tow.

AMC® 8590HT is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

SMCarbon® 80CF60-12K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Lytex® 9063-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.

Polynt Group LPMC 14/28 RN-Color is generally used in automotive applications.

UDCarbon® 90CF60-12K is a unidirectional molding compound based on epoxy resin and reinforced with continuous carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group SMC LPA 2000 R35 is a sheet molding compound based on an unsaturated polyester resin class “A” grade reinforced with glass fibers. This SMC has been developed for body panel application, with excellent mechanical properties and excellent surface. Good varnish adhesion and excellent gluing are other peculiarities of SMC LPA 2000 R35. SMC LPA 2000 R35 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group HUP 24/57 RB-Color is generally used in automotive applications.

SMCarbon® 26CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group BMC EP 16 LW is epoxy-based material, available in neutral color or Black and it is generally used in aeronautical, automotive, leisure and clothing applicatons.

Polynt Group BMC EP 24 MF is material filled with inert minerals, processable by transfer, injection and compression molding and it is generally used in automotive, electronic and electrical, railway sector applicatons.

SMCarbon® 24CF60-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Toray Toray MicroPly™ SF-4 is a BMI syntactic film that provides excellent elevated temperature properties and compatible to Toray RS-8HT. Toray MicroPly™ SF-4 is available in unsupported or supported continuous film form in various thicknesses from 0.25–2.5 mm (10 mils– 100 mils). Toray MicroPly™ SF-4 has been evaluated and qualified in aerospace structures. 204°C (400°F) Cure BMI Syntactic Film. Film to 127 cm (50”) wide.

RECarbon® 24CF40-400gr - Recycled molding compound based on vinyl ester resin and reinforced with carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 80CF40-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SMCarbon® 24CF50-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Quantum Composites QC-8705 is a vinyl ester ESC® molding compound reinforced with continuous, unidirectional (0°) glassfibers. It provides high strength,stiffness, and fatigue resistance in the fiber direction, and can be used to selectively reinforce other materials.

UDCarbon® 24CF60-12K is generally used in automotive, industrial sector, leisure and clothing applications.