Products in Transportation: Epoxy & Epoxy Derivatives

SYNTHALAT A 200 is an acrylic/epoxide resion cross-linked with polyisocyanate. It is used in combination with aliphatic polyisocyanates for air-drying and oven-drying two-component primers with excellent filling properties, quick drying, and good adhesion to steel, aluminum, and zinc, which gives good results in condensed moisture tests and salt spray tests. Wherever there is a requirement for maximum corrosion resistance and adhesion, this type of 2-component primer is used. It has applications in industrial maintenance, primers and lacquers, and metal coatings.

Cosmic Epoxy CP7314 is a long-glass reinforced epoxy molding compound provided in flake form. This material is well-suited for serving as a replacement for a wide range of aircraft and heavy metal parts, offering enhanced durability and strength for demanding applications in these industries.

Cosmic Epoxy CP7318 is a long-glass-reinforced epoxy molding compound supplied in flake form. It can be compressed or transfer-moulded and exhibits high physical strength. This material has a shelf life of 12 months when stored at 20°C or lower. It serves as an ideal replacement for numerous aircraft and heavy metal parts.

Cosmic Epoxy CP7312 is a long-glass-reinforced epoxy molding compound supplied in flake form. It can be compression or transfer-moulded and offers high physical strength. This material has a shelf life of 12 months when stored at 20°C or lower. It is an excellent replacement option for a wide range of aircraft and heavy metal parts, making it a versatile choice for various applications.

Cosmic Epoxy CP7311 is a long-glass reinforced epoxy molding compound that comes in a flake form. It is designed to be an ideal replacement for various aircraft and heavy metal parts, providing a durable and high-strength material suitable for demanding applications in these industries.

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

MC511A is a high strength, glass epoxy laminate that is specially formulated to meet power generation producer’s exacting standards where higher strength at elevated temperatures are required. MC511A is certifiable to MIL-I-24768/3, Type GEB, IEC-60893-3-2 EP GC 203 and is halogen free to meet the European restrictions.

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

EC-1106 is an electronic grade Optically Clear Epoxy, Encapsulating and Potting Compound. This heat curing system has very low viscosity and long work life.

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

BECKOPOX™ EM 2120w/45WA is a dispersion and liquid within the epoxy and epoxy derivatives chemical family, functioning as a binder, resin, and corrosion inhibitor under CASE Ingredients. Targeting automotive and transportation, paints and coatings, and building and construction sectors, it stands out with APEO-free, formaldehyde-free, and VOC-free labeling. This product offers corrosion resistance, a balanced set of properties, low flash rust, and matting features. Suitable for 1K coatings, epoxy coatings, primers, and waterborne coatings, it is compatible with epoxies and adheres well to metal and wood substrates.

BECKOPOX™ EP 140/80SNB is a liquid binder and resin within the epoxy and epoxy derivatives category by CASE Ingredients. Tailored for the automotive and transportation and paints and coatings markets, it finds specific applications in automotive OEM coatings, marine coatings, and industrial coatings. This product is compatible with metal substrates and is available in epoxy and solvent-borne coating forms.

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

BECKOPOX™ EP 147W is a liquid binder and resin belonging to the epoxy and epoxy derivatives family from CASE Ingredients. This product is distinguished by its APEO-free, formaldehyde-free, isocyanates-free, solvent-free, and VOC-free labeling claims. Designed for automotive, transportation, and paints and coatings sectors, it offers improved chemical resistance, flexibility, hardness, and a low odor. It serves applications such as automotive OEM coatings, marine coatings, decorative paints, and industrial coatings on metal substrates. Additionally, its formulation allows emulsification in water, making it suitable for primer and waterborne coating types.

Catana™ EPOX 2015 is a distilled min. 98% grade of 2-ethylhexylglycidylether. Catana™ EPOX 2015 main use is as reactive diluent for high viscosity epoxy resins applied in high solids coatings, tooling, flooring, adhesives, etc.

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

BECKOPOX™ VEM 2448/50EEP is a self-crosslinking, modified, carboxylated epoxy resin serving as the exclusive binder in can-coating systems for both interior and exterior applications. It is particularly well-suited for white and clear coatings, including stamping enamels, capsule lacquers, foil lacquers, and coil-coating primers. This resin excels at providing outstanding resistance. Its versatility extends to epoxy coatings, solvent-borne coatings, and primers. Widely applicable, it finds use in marine coatings, vehicle refinish, and other packaging coatings.

BECKOPOX™ EP 384W/53WAMP is an epoxy- and epoxy derivative-based binder and resin by CASE Ingredients. Tailored for diverse markets such as automotive and transportation and paints and coatings, it offers corrosion resistance and enhanced chemical resistance. This liquid dispersion, known for its multi-substrate adhesion, is suitable for various applications, including automotive OEM coatings, marine coatings, and industrial coatings on metal surfaces.

EC-1190 is an epoxy encapsulating system with a very low density for use in the aerospace and medical industries. EC-1190 is low viscosity and can cure at room temperature when used with catalyst EH-21. EC-1190 has excellent chemical resistance and a low coefficient of thermal expansion (CTE).

BECKOPOX™ EP 140, a liquid binder and resin in the epoxy and epoxy derivatives family by CASE Ingredients, is recognized for its excellent moisture and solvent resistance. Serving the automotive and transportation, building and construction, industrial, and paints and coatings sectors, it offers good adhesion and low shrinkage. This product finds applications in automotive OEM coatings, marine coatings, and industrial settings like tooling and moldmaking. Compatible with metal substrates, its specialized uses encompass adhesives, trowelling, casting, laminating compounds, and coatings demanding high chemical resistance.

BECKOPOX™ EP 2392W/70MP, a liquid binder and resin from the epoxy and epoxy derivatives family by CASE Ingredients, stands out with its corrosion resistance and high pigment loading features. Designed for automotive and transportation paints and coatings markets, it serves automotive OEM coatings, marine coatings, and transportation finishes. This epoxy coating, compatible with epoxies, functions as a top coat and waterborne coating, specifically tailored for metal substrates. Notably, its emulsifiable nature in water enhances application versatility.

BECKOPOX™ EP 386W/52WA is an epoxy and epoxy derivative binder and resin from CASE Ingredients, featuring benzyl alcohol-free and VOC-free labeling. Designed with corrosion resistance, improved flexibility, and matte gloss capability, it caters to the automotive, construction, and coatings markets. Ideal applications include automotive OEM coatings, marine coatings, and industrial finishes on metal and plastic substrates.

BECKOPOX™ EP 385W/56WA, an epoxy and epoxy derivative binder and resin by CASE Ingredients, boasts VOC-free labeling. This dispersion provides corrosion resistance, improved chemical resistance, and enhanced flexibility. Targeting automotive, building and construction, and paints and coatings sectors, it excels in applications like automotive OEM coatings, marine coatings, and decorative finishes on metal surfaces and laminates.

BECKOPOX™ EP 128 is a liquid binder and resin falling within the epoxy and epoxy derivatives category of CASE Ingredients. Noteworthy for its solvent-free and VOC-free attributes, this product excels in automotive and transportation, building and construction, industrial, and paints and coatings sectors. It offers exceptional chemical and moisture resistance, good adhesion, and low shrinkage. Tailored for applications like automotive OEM coatings, marine coatings, and industrial castings, it is compatible with metal substrates and various coating types, including solvent-borne and high-solids coatings.

Catana™ EPOX 2474 is a distilled min. 98% grade of normal-butylglycidylether. Catana™ EPOX 2474 is most efficient viscosity reducing reactive diluent for high viscosity epoxy resins such are applied in adhesives, laminating, tooling, etc.

EPOXIBOND™ EB-135LP is a clear epoxy adhesive designed for electronic, optical, medical, and general applications and for casting of small electrical components. This epoxy system has 2 to 1 mixing ratio by volume & cure fast at moderate temperature. The cured adhesive gives high impact and bond strength. It can be used for bonding glass, metals, woods and some plastics.

Catana™ EPOX 2360 is a clear viscous liquid consisting of polypropyleneglycol diglycidylether. It has a higher epoxy group content than the Catana™ EPOX 2361. Catana™ EPOX 2360 main use is as reactive diluent or flexibilizing resin for high viscosity epoxy resins applied in coatings, casting, adhesives, sealants, etc.

BECKOPOX™ EP 2384W/57WA is a dispersion and liquid binder and resin classified under the epoxy and epoxy derivatives family by CASE Ingredients. Notably benzyl alcohol-free, solvent-free, tin-free, and VOC-free, it offers a good balance of properties with features like high film thickness, low odor, matting, multi-substrate adhesion, and reduced surface preparation. Catering to automotive and transportation and paints and coatings sectors, it finds applications in automotive OEM coatings, marine coatings, vehicle refinish, decorative paints, industrial coatings, and metal coatings. This product, compatible with epoxies, is formulated as both epoxy and waterborne coatings suitable for various substrates, particularly metal.

SETAQUA® 8556, a waterborne coating with a long potlife, is compatible with are wood ones. This product's versatility allows it to be used in a wide range of industries, such as industrial coatings, building and construction coatings, vehicle refinishing, automotive and transportation coatings, and marine coatings. SETAQUA® 8556's physical state as a dispersion facilitates handling and incorporation into formulations. Discover the benefits of a coating that has a longer pot life, providing ease of application and versatility. Enhance your automotive, marine, and industrial applications with SETAQUA® 8556, a dependable aqueous solution that produces excellent wood surface finishes.

BECKOPOX™ EP 2688/80MEK stands as an internally flexible solid epoxy resin, well-suited for high-solid solvent-based anticorrosion primers. Its preferred curing agents include polyamines, polyamidoamines, or amine adducts. This versatile product functions as both a hardener and a binder. Specifically compatible with metal surfaces, BECKOPOX™ EP 2688/80MEK is designed for use in various coating applications such as marine coatings, furniture coatings, and industrial coatings, particularly in the realm of metal coatings.

Life-Kote 98 Series is a two-component, high solids, polyamide-cured, epoxy primer designed for use on interior or exterior substrates that require both extra flexibility as well as an extra corrosion resistant base for high performance topcoats. This product offers excellent adhesion to both the surface and the topcoats that follow. Highly resistant to many alkalis, solvents, and other active chemicals and provides excellent substrate protection in chemical and atmospheric environments. 98 Series can be top coated with converted epoxy topcoats, acrylic urethanes, and other high performance coatings.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes