Products in Transportation: Glass Beads & Fibers

G-PLY™ BX300S C4 is a biaxial +45°/-45° 332 gsm stitched glass NCF. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

HexForce™ 1526 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Conformat N751 is a continuous strand, glass fiber reinforcing mat. N751 is a semi-porous mat most frequently used for structural strength in flat or slightly contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. N751 functions equally well as reinforcement in both Pultrusion and Continuous Lamination processes. With the addition of an optional extra surface veil, N751 provides an outstanding surface finish.

E-glass 1080 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

FC-104 is made up of a Plain Weave and a Medium Typical Finish.

HexForce™ 1620 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Polyform Veil Mat PVM/300/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.

Saint-Gobain Vetrotex America EC7 24 mmis a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

Hesgon Company Polyester-Glass Heat Shrink Tape 48-72PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

Polyform UD is a unidirectional fabric where the majority of fibers are orientated in one single axis. This allows for maximum mechanical properties to be gained in a single direction making it an ideal solution for long aspect ratio parts such as wind blades.

Glass Microspheres HGT60 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

Style 1076 is 0.98 oz. per square yard (33.0 g/m2 ) plain weave fiberglass fabric.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

HexForce™ 6781 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

3733 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.

512 Assembled Roving is specifically designed for powder and emulsion chopped strand mat applications in unsaturated polyester resin. It offers good choppability and dispersion. It can be used in soft chopped strand mats. 512’s main end-use applications are boat hulls and sanitary apparatus.

G-BOND 60P 40THC is a 60gsm thermoreactive glass mesh combined with a 40gsm EVA coating. G-BOND is used to stabilize core materials (balsa, PVC, PET).

Carbon-Core M110E200-1T is Chopped Strand Mat.

Eurocarbon BV Glass Fiber GL 020-018 is made of A-grade Eglass yarns. To cover a whole range of thicknesses, the program is made of a light, medium and heavy construction. Each range will have a specific range areal weights.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

US-16-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Polyform Biaxial 0/90 is a bidirectional fabric with warp and weft plies orientated at 0° and 90°. This allows for maximum mechanical properties to be gained in both directions for strategic placement in a structure such as structural panels

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

HexForce™ 2313 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

E-LT 2400 is a E-Glass fiber type.

Superior Huntingdon Composites M8643X4 is this is a family of continuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling properties and good weight uniformity.

E-glass 104 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

C-TAPE™ U600P 24K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 651 gsm. It is made using 24K HS carbon fiber; This carbon tape is used primarily for local reinforcement with epoxy resin. *Disponible également en fiber FOE

HexForce™ 7715 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

HexForce™ 1938 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

TG-15-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Carbon-Core M110E300-1T is Chopped Strand Mat.

This reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and betier porosity.

FC-1610 is made up of a Plain Weave with a Soft Typical Finish.

AeroWindTech AWTFGC 1597 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.

AeroWindTech AWTFGC 7587 is fiberglass fabric have many unique and outstanding properties, which provide design opportunities for the improvement of existing products and the development of new, lightweight, and cost-efficient products. Inorganic fiberglass textile fibers will not rot, mildew, or deteriorate. They resist most acids, have excellent thermal properties, and high tensile strength ideal for the transportation industry. When choosing your fiberglass, you must consider thickness, weight, construction, yarn size and finish desired. All fiberglass products offered are supported with BMS specification 9-3, AMS or Mil specifications to fulfill all rigid requirements within aerospace manufacturing requirements.