Products in Transportation: Polyurethanes (PU)

Lechler S39080 Glasstop Bucciato Versilia is a 2 Component semi-glossy polyurethane topcoat with orange peel effect. It has good weather resistance. Especially suitable in the yachting field to hide some substrates’ defects, it is used for boat internal surfaces or for painting of the deck and superstructure.

CORAFOAM® U 280 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

Polyglass Coatings EX-2C Low VOC Topcoat is a two component highly cross-linked, high performance polyester polyurethane coating providing a high gloss surface finish.

Z-SEMIFLEX is a material characterized by a minimal shrinkage level and resistance to greases and chemicals. It is based on TPU 98A which gives your models unique characteristics, including high elasticity and rubber-like properties. Z-SEMIFLEX also exhibits high impact strength which allows you to apply force to a 3D printed model with little risk of damage. These unparalleled qualities make Z-SEMIFLEX ideal not only for prototypes tested in adverse industrial environments, but also for models resembling organs used in medical assessment processes.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Thermo-Lite Board®Tough is manufactured with polymer foam and a heavy-weight woven fiberglass lay-up, this product is acceptable for standard structural loading applications. Available in a density range of 24 to 44 lbs/ft³ depending upon the thickness required.

High molecular weight polymeric dispersant for deflocculation of all type of pigments

Miller-Stephenson Chemical MS-472C Urethane Coating is a non-flammable, solvent-based, one-component polyurethane conformal coating that be applied by brush, spray or dip methods. Our coating provides excellent electrical and barrier properties in a thin-film applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-472C will maintain its properties even after long exposure to the elements with minimal color change.

Brandonite® 1700-70D contains features such as Excellent low temperature flexibility and elasticity.

MB 1300 is a Mahogany colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1300 is medium low density foam of approximately 30lbs/ft³ board. Easily cut using CNC machining equipment the MB 1300 is perfectly suited for visual master models, architectural design models as well as design verification and prototype tools.

Hempel A/S Hempel's Polyenamel 55102 is a two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and color retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

CORAFOAM® U 60 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

RE-FLEX® 1588AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Foam Partner B 55 N is a polyester PUR foam which are versatile materials and useful for a variety of applications. The defining characteristics of our polyester PUR products include their impact-absorbing properties, excellent resistance to aging, and high compression load deflection.

RE-FLEX® 580AXL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Sopero Lacktechnik Active_O works as simply as it does efficiently. If light (illumination or sunlight) hits an Active_O paint surface, 99.99% of germs as well as bacteria, viruses, fungi and spores are killed. And that without harmful biocides or finely divided metals such as e.g. B. isothiazolinones or silver. Active_O not only reduces disinfection costs by ensuring automated basic hygiene, but also helps to close hygiene gaps between cleaning processes. This prevents germs from being carried over and spreading further.

FINIGARD 301 is a water based, PUD Sealer for Chrome (III) passivated, Zinc- and Zinc-alloy electroplated surfaces. It was developed to meet the demands of the automotive, window fitting and construction industry. It provides increased corrosion protection and improved optical appearance. The iridescence of passivated surfaces can be effectively reduced, leading to a homogeneous color tone and appearance.

SAERfoam 80 has been developed to improve the handling of structures such as boat hulls and decks and large industrial parts made in infusion.

High molecular weight polymeric dispersant for deflocculation of all type of pigments.

Rigid Thermoplastic Polyurethane (TPU)

RE-FLEX® 795AS is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

High molecular weight polymeric dispersant for deflocculation of all type of pigments

C-RAM FLX Urethane FLX-1.0 has excellent abrasion resistance and tear, good weather resistance, excellent tensile strength and elongation.

Anchortech® Premium Fast Dry Adhesive Sealant Black is a fast dry, paintable, hybrid polyurethane adhesive sealant provides excellent permanent adhesion to fiberglass, plastic, wood, teak, aluminum, steel, boat hardware and other substrates in or out of the water. Forms 100% waterproof seal and approved for permanent water submersion. Provides excellent flexibility with superior resilience for joint movement +/- 25%. This product has excellent “green strength” meaning it exhibits instant grab-and-hold characteristics. High elongation of 350% provides flexibility and extends product life.

GlueDevil PU Marine Grade Wood Glue is one component, polyurethane-based wood adhesive which cures when exposed to moisture in the air and creates waterproof bonds making it ideal for construction or repairs to ships or yachts. Also ideal for waterproof bonding's of exterior furniture, door frames, window frames, Formica and hardwoods such as sleeper wood.

Rigid Thermoplastic Polyurethane (TPU)

Sogel Hybrathan™ Gel coats are developed from special unsaturated polyester resins combined with special additives. These gel coats provide an exceptional class A surface for products manufactured using polyurethane substrates in close-up molds (compressed and heated molds) and open-molding processes (spraying). Our Hybrathan ™ Gel coats are easy to use. They can be used with any manual spray equipment. Unlike polyurethane gel coats, these gel coats have a better gloss retention (over 80%), no porosity and an affordable price.

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and color retention. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.

JFoam™ BX-450 is a two component, water blown polyurethane modified polyisocyanurate foam designed for structural core applications. BX-450 exhibits excellent high temperature properties and can operate continuously at temperatures up to 350°F.

Foam Partner B 20 NF/H is a polyester PUR foam which are versatile materials and useful for a variety of applications. The defining characteristics of our polyester PUR products include their impact-absorbing properties, excellent resistance to aging, and high compression load deflection.

POLYQuik® HPU-1227 is a two-component, 100% solids, aromatic spray elastomer, which cures quickly to create a monolithic coating. It has excellent abrasion resistance, and adhesion to wood, concrete or metal. It can be applied under a wide range of climate conditions, and is resistant to blistering under high humidity conditions.

Polyglass Coatings EX-2C Low VOC Topcoat (with A.C.T. B) is a two component highly cross-linked, high performance polyester polyurethane coating providing a high gloss surface finish.

Lechler S65302 Vernice Clipper Lucida U.V. is a 1 Component glossy varnish, of polyurethane nature. The high light fastness and the excellent resistance in the marine environment make it especially suitable for a finish with a 1 Component paint process in the yachting field. It is suitable for painting above the waterline (upper works).