Products in Transportation: Industrial Applications

EB 1001 is a Ethyle Propylene Diene monomer with wire mesh. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].

Nitrile 0209-70 is a high ACN content with low plasticizer level provides excellent resistance to petroleum oils, automatic transmission fluid (ATF), and crude oil; formulated as a transfer-moldable variant of Parco general-purpose nitrile 4200-70 for producing thick cross-section custom molded parts; used extensively in oil tool seals and packing elements for pressures to 1,500 psi.

RL 7542 is silicone fiberglass with aramid. 0.0625" ; 1 Ply Aramid Inserted Silicone Belt.

Polyether Sulfone Resin - Medium Viscosity, un-reinforced standard grade for easy injection molding.

Da/Pro Rubber TPE elastomers add soft-touch grips, high tech looks, multiple color capability, scents, surface textures and more to a variety of components. TPE elastomer molding is being used in consumer products, industrial products, medical device components, electrical products and in almost every other industry.

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers

Thermec™ S 4150RC65 by DOMO Chemicals is comprised of Polyphenylsulfone. It is commonly used

Nitrile 4457-65 is nitrile seal ideal for use in low temperatures and hydraulic fluids.Parco 4457-65 seals are suitable for applications ranging from -65 to +200°F.

Thermec™ N 4314R35H by DOMO Chemicals is comprised of Polyphthalamide. It is commonly used

Thermec™ N 4350R35H by DOMO Chemicals is comprised of Polyphthalamide. It is commonly used

BDT KR3752 has an excellent mold flow, hot tear resistance, bonding adhesion, good resistance to the fuel containing alcohols.

Viton® 3/32" Rubber was originally introduced over 50 years ago to meet the needs of the aerospace industry for a high-performance elastomer. Since then, the use of Viton® has spread to many other industries, including the automotive, fluid power, appliance and chemical industries. Viton® fluoroelastomer has developed a reputation for its outstanding performance in very hot and extremely corrosive environments. Viton® fluoroelastomer is particularly valued for its excellent heat stability and resistance to aggressive fuels and chemicals. Viton® fluoroelastomer is the most specified fluoroelastomer for fuel systems seals, expansion joints and gaskets.

KODAK ESTAR™ HIGHLY CONDUCTIVE (HCF) FILMS 6RF1-932T is an optically clear and highly conductive flexible film. It is a high-quality polyester film (PET) featuring a proprietary conductive polymer (PEDOT/PSS) coated in-line during the manufacturing process.

KODAK ESTAR™ HIGHLY CONDUCTIVE (HCF) FILMS 6RF1-922T is an optically clear and highly conductive flexible film. It is a high-quality polyester film (PET) featuring a proprietary conductive polymer (PEDOT/PSS) coated in-line during the manufacturing process.

Thermec™ N 4314R45H by DOMO Chemicals is comprised of Polyphthalamide. It is commonly used

Envir® PA6G33-BK1304 is a 33% Glass fiber reinforced Nylon 6 molding resin. PA6G33 is an excellent utility grade compound that is optimized for high properties. It is provided Black in color.

Nitrile 4465-65 is formulated expressly for use in low-temperature aviation fuel systems; low ACN content enables compounds to meet requirements of Aerospace Materials Specification (AMS) 7271, QPL listed, including passing low-temperature fuel seal test at -65°F.

POM copolymer unreinforced, medium viscosity, UV stabilized

Glass reinforced (13 %) High Temperature Polyamide - Blow Molding grade with excellent chemical resistance, improved flow and high HDT.

Resin-SA Pty Ltd SHCP 7110 is Bisphenol A, epoxy modified vinyl ester resin with high strength properties.

Synolite™ 8388-L-7 by Aliancys is comprised of Polyester (unspecified). It is commonly used It is available in Liquid form.

Glass reinforced (30 %) - High Temperature Polyamide Alloy, excellent chemical and electrical resistance, high stiffness, modulus and HDT.

Envir® PA6G33VL-BK0801 is a 33% Glass fiber reinforced Nylon 6 molding resin. It is a Value added “upcycled” compound with a good balance of properties. 6G33VL incorporates a high recycled material content, giving it a truly “green” appeal. It is provided Black in color.

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

Resin-SA Pty Ltd RES GP 002 is a general purpose ortho resin for which is used for spray up/ hand laminating.

Thermec™ S 4160T1 by DOMO Chemicals is comprised of Polyphenylsulfone. It is commonly used

Thermec™ S 4162T2 by DOMO Chemicals is comprised of Polyphenylsulfone. It is commonly used

Thermec™ S 6250RC65 is with 65% glass fiber and mineral reinforced.