Products in Marine: Reinforcement

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

BB 2100 is a standard modulus carbon fiber precision cut from tow, with typical mechanical properties. These fibers are ideal for introduction into Bulk Molding Compound (BMC) materials, injection molding and pellet production for a wide range of end-use applications. Fibers come with standard epoxy-based sizing chemistry, optimized for use with most thermoset and thermoplastic resin systems. BB 2100 fibers are available as first quality certified materials as well as at discount without certifications. BB 2100 fiber is precision cut according to each customer specified length (e.g. 0.125, 0.25, 0.50 through 2.75" fiber lengths).

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

AKSACA™ AC 2101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.