Products in Commercial: Reinforcement

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Owens Corning M123 chopped strand mat represents a versatile solution for a wide range of applications, including open and closed mold, continuous and discontinuous lamination, filament winding, and other processes. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium-Tex multi-chop strands randomly dispersed and bonded together by a highly-soluble polyester powder binder. Certified by Lloyd’s Register of Shipping.

Owens Corning P213 is a multi-end roving represents a compelling solution for the manufacture of glass mat reinforced thermoplastic (GMT) applications. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with polypropylene resin systems.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC225 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Owens Corning SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required. Manufactured using state-of-the-art Owens Corning® Type 30™ Single-End-Roving technology. It has excellent compatibility with polypropylene. It is produced via statistical process control in manufacturing facilities certified to ISO 9001. It is produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning..

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC600 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

When high modulus fibers are combined with Innegra IS-940 fiber, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

FlexForm® MT is used in a contact oven with optional forced hot air preheat, for 3D applications. Available in roll goods or sheets. Made from Bast Fibers, an annually grown crop unlike wood products that take years to replace and fiber glass that is destructive to the environment, difficult to handle and uses significant fossil fuels to produce.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC300 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

When high modulus fibers are combined with Innegra IS-1250, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

When high modulus fibers are combined with Innegra IS-1880, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

Innegra™ H fibers are hybrid fibers containing Innegra H fibers and high modulus fibers including, but not limited to basalt, carbon, and glass. These fibers are intermingled at the filament level with a variety of combinations.

When high modulus fibers are combined with Innegra IS-2800, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

When high modulus fibers are combined with Innegra IS-625, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

Owens Corning P215 multi-end roving represents a compelling solution for sheet molding compound and headliner applications. It is produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning and is compatible with polyester, vinyl ester and polyurethane resin systems.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC450 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC900 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Owens Corning M715 chopped strand mat represents a compelling solution in contact molding applications where quick wetting, rapid air release, good conformability and low resin consumption are desired. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium tex multi-chop strands randomly dispersed and bonded together with a highly soluble polyester powder binder. Compatible with polyester, vinyl ester, and epoxy resins.