Products in Other Transportation Applications: Automotive Applications

High heat resistance ABS. Benefits: Increased flow; Good process ability behavior; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance ABS. ISO shortname: ISO 2580-1 ABS 1-M, MG, 105-15-16-20. Benefits: Excellent balance of impact strength and flowability; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI)

Improved heat, chemical and dynamical resistance. Major Benefits: Low emission; Medium heat resistance; Chemical resistance. Typical Applications: Mirror housing, Door components, Instrument panel parts, Pipes & fittings.

High impact strength, high gloss, low emission. Applications: Center console, door components, instrument panel parts.

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

High heat resistance, PC-modified, low emission, increased flow. Typical Applications: Radiator grille, Rear light housing, Tailgate cover, Door components, Instrument panel parts.

Very high heat resistance ABS with extreme impact resistance. Benefits: Extreme impact resistance with low temperature ductility; Very high impact up to -30°C; Well balanced flowability and heat resistance; Lower density than PC/ABS; Low emission and odor grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with polycarbonate and poly(styrene-co-maleimide). ISO shortname: ISO 2580-1 ABS 2-X, MG, 115-15-35-20.

Medium/high heat grade with superior impact resistance, PC-modified, low emission. Major Benefits: Low emission; Very high impact (PC modified). Typical Applications: Radiator grille, Tailgate cover, Glove box, Instrument panel parts.

PPS, linear, unreinforced, impact modified

PPS, cross-linked, GF 40, with improved hydrolysis resistance for applications in the automotive engine compartment.

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

Endumax® Film TA23 is made from a special type of Ultra High Molecular Weight Polyethylene (UHMWPE) raises performance when performance counts.

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

Plain bearing material based on PPS, PPS + carbon fiber + graphite

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

POM copolymer unreinforced, dry blend with color masterbatch green, medium viscosity for injection molding

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

POM copolymer unreinforced, medium viscosity, UV stabilized

POM copolymer unreinforced, medium viscosity, optimized crystallization behavior

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

POM copolymer unreinforced, medium viscosity for injection molding