Products in Rail & Mass Transit: Pipes

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Crystic® Transfer Moulding Resin 785PA is apre-accelerated, DCPD based, polyester resin designed for use in RTM (Resin Transfer Molding). It has a lower styrene content than conventional RTM resins and can significantly reduce the occurrence of print through, to produce moldings with an enhanced surface finish.

ELFOAM® P200 is a 2.0 lb/ft3 (32 kg/m3 ), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

ELFOAM® P600 is a 6.0 lb/ft3 (96 kg/m3), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

ELFOAM® P300 is a 3.0 lb/ft3 (48 kg/m3), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

ELFOAM® P400 is a 4.0 lb/ft3 (64 kg/m3), rigid, unfaced, closed cell polyisocyanurate foam supplied as blocks, sheets and fabricated shapes for a variety of insulation, core material and carving applications. Polyisocyanurate foam (polyiso) is similar to polyurethane foam but offers greater dimensional stability over a wider service temperature range.

Norsodyne® BR-270HV - multicolor application, high viscosity, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

SMCarbon® 80CF60-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

ENYDYNE® H 88222 TA - Unsaturated polyester resin in styrene,DCPD. It is used to produce parts with high resistance to fire through hand lay up and spray up,injection molding,rtm method.

Stypol® 040-2989 - isophthalic laminating tooling resin. Main applications areas are automotive, composites, industrial sector, marine, mass transports, mold manufactur etc.

NORSODYNE® M 01070 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding,injection molding,rtm method.

Polynt Group BMC 580 is a bulk molding compound based on an unsaturated polyester resin reinforced with natural fibers. This BMC has been developed for industrial application BMC 580 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Norsodyne® 3338W has general purpose, good water resistance, promoted and wax version of Norsodyne® 3338. Main applications areas are automotive, building and construction, industrial sector, marine etc.

SMCarbon® 24CF40-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Enydyne® C40-8161CT is filled resin, NF P92-507 standard approved: M2 F1 and it is generally used in industrial sector, mass transports, railway sector applicatons.

Stypol® RHPS1221 - pre-promoted unsaturated polyester resin, high performance RTM laminating. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® 3338 has general purpose, good water resistance, promoted and non-waxed. Main applications areas are automotive, building and construction, industrial sector, marine etc.

SMCarbon® 80CF60-12K/2 is generally used in automotive, industrial sector, leisure and clothing applications.

Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Norsodyne® BN-595Y - excellent pearl dispersion and surface gloss, thin button. Main applications areas are leisure and clothing etc.

Polynt Group BMC RF 18 VE is a bulk molding compound based on a vinylester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Excellent mechanical properties, mainly impact resistance, and good fire protection grade are combined into the BMC RF 18 ve.. BMC RF 18 VE is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Stypol® APMV4000 - polymethylmethacrylate low profile additive. For use in SMC, BMC and wet molding applications. Excellent mechanical properties and heat resistance. Main applications areas are electronic and electrical, home and domestic applications, industrial sector etc.

Norsodyne® 3318FR - non-promoted and non-wax. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

Norsodyne® 2625TI - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 737-6755 is general purpose RTM resin with rapid cure rate for increased mold turnover; good profile. Main applications areas are aeolian, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.