Products in Building Envelope & Roofing: Epoxy & Epoxy Derivatives

Circa 1850® NU-LUSTRE-55 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-55 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-55 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-27 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-27 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-27 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-57 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-57 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-57 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

Circa 1850® NU-LUSTRE-66 cures to a thick, high gloss coat in about 24 hours. One coat is usually all that is needed to produce the desired finish. Additional coats may be applied after previous coats have cured for a minimum of 24 hours, lightly sanding in between coats. NU-LUSTRE-66 may be applied over almost any surface, rough or smooth. It may be applied over leather, wood, varnish, ceramics, rocks, stones, dried flowers, shells, and many others. It is ideal as a gap/cavity/crack filler. If in doubt, test a small sample of the item you wish to cover. NU-LUSTRE-66 will NOT ADHERE to silicone or wax. Before starting on your project, we strongly suggest you do a TEST PIECE to help you become familiar with this type of product, and for you to decide whether this will be the right product for the type of project you are doing.

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

BECKOPOX™ EP 2340W/56WA is a liquid binder and resin within the epoxy and epoxy derivatives family, provided by CASE Ingredients. Notably APEO-free, formaldehyde-free, solvent-free, and VOC-free, it showcases enhanced chemical resistance and hardness. Tailored for the building and construction and paints and coatings sectors, its applications span decorative paints, building envelopes and roofing, and EIFS and insulation. This product, compatible with epoxies, is available as both an epoxy and waterborne coating, eliminating the need for a primer due to its primerless feature.

BECKOPOX™ EP 387W/52WA is an epoxy and epoxy derivative binder and resin by CASE Ingredients, labeled benzyl alcohol-free and VOC-free. Noted for its corrosion resistance, improved flexibility, and matte gloss capability, it serves the building and construction and paints and coatings sectors. Applications encompass decorative paints, EIFS, insulation, and industrial coatings on both metal and plastic substrates.

EBECRYL® 600, the diacrylate ester of bisphenol A epoxy resin, is distinguished by its light color and rapid cure response. Widely utilized in UV/EB applications, including inks, coatings, and overprint varnishes, EBECRYL® 600 stands out for its versatile performance. This product is particularly suitable for applications involving metal and wood substrates. Key features encompass faster cycle time, low energy consumption, long pot life, improved hardness, high gloss, improved chemical resistance, and low-temperature curing. It finds applications in decorative paints, wood coatings and finishes, EIFS, and insulation, utilizing radiation cure methods.

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Kemperol® 022 is a two-component, high performance, cold-liquid applied, solvent-free, low VOC, crack-spanning resin for waterproofing beneath tile and stone applications.

Polyglass Coatings EP HiBuild Primer is a high solid, high build, twocomponent epoxy primer. EP HiBuild Primer is ideally suited for heavy industrial uses and/or waterproofing requirements.

DURACLAD ECS C-307 is a tile adhesive.

Black Swan® Stik-It Epoxy Putty is a kneadable fast curing epoxy putty that mixes in one minute to provide permanent repairs to many surfaces including metals, wood, glass, concrete ceramics and numerous plastics. One hour after mixing, Black Swan® Stik-It Epoxy Putty can be drilled, sawed, sanded, filed, tapped, machined or painted. It comes in a handy tootsie roll form with the curing agent encapsulated in the contrasting color base material. Its remodeling clay-like consistency eliminated drips and runs, provides no mess application with no tools required for use. Stik-It Epoxy Putty is a general purpose epoxy putty.

EPOXYPLUS is the latest advancement in non-staining technology. Specially formulated with 100% solid epoxy resins and hardeners, EPOXYPLUS uses integrally colored quartz fillers, which eliminates pigment staining of tiles, typical of traditional cement and epoxy grouts and joint filters. It can be used for setting and grouting ceramic tile, pavers, marble and stone over a variety of substrates.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Polin EP 9115 is a two component water based epoxy paint primer.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

CHS-EPOXY 572 is a Bisphenol A/F epoxy resin

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Anchor Paint Manufacturing Ancorpoxy Series 6900 is a high-solids modified polyamine cure epoxy coating that provides a low temperature cure with excellent chemical and solvent resistance. Anchorpoxy 6900 is recommended for civil engineering, building and construction applications. Anchorpoxy 6900 is excellent where hi-gloss, smooth, non-yellowing properties are required.

CHS-EPOXY 514 is a Bisphenol A/F resin modified by monofunctional reactive diluent.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

APCM DA 409U/S2-glass is a tough, versatile, modified epoxy resin prepreg that cures at 250ºF. The S-2 glass is a Zentron High Strength fiber. Standard weight is 260g/m2 with a 38% resin content. Other weights and resin contents available upon request.

Duropoxi F is a two-component, 100% solids, chemical resistant, exterior grade epoxy adhesive. Non-sag gel epoxy. Flexible.

Biresin® CR141 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

CHS-EPOXY 571 is a Bisphenol A/F epoxy resin.

APCM DA 4092 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

The TE06 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

Polygem 1004 Fast Set Wearing Compound is a very fast setting epoxy paste specially formulated for the sealing of cracked concrete prior to injection with epoxy or urethane resin systems. Polygem 1004 Fast Set Wearing Compound is an easy to mix 1 to 1 by volume ratio and will be ready for injection in as little as 35 minutes. is the preferred epoxy for use in occupied areas such as residential or institutional work areas. Polygem 1004 Fast Set Wearing Compound is a thick non-sag paste compound that will allow for vertical and overhead patching.

Polygem 580FS Fast Set Tile Adhesive is a specially formulated epoxy paste to provide a fast setting patching compound for immediate protection of surfaces subject to wear and abrasion. Polygem 580FS is an easy to mix 1 to 1 by volume ratio and will cure in as little as 15 minutes. Polygem 580FS is ideal for emergency repairs and will minimize down-time of critical equipment and process lines. Polygem 580FS is waterproof and resistant to most chemicals and solvents. Polygem 580FS is a thick non-sag paste compound that will allow for vertical and overhead patching.

IBA Kimya San. ve Tic. A.S. FF20 is a thermosetting matt and semimat powder coatings based on epoxy and polyester resins designed for interior applications. It has excellent yellowing resistance.

The TE02 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

CHS-EPOXY 501 is a Bisphenol A/F resin modified by monofunctional reactive diluent.