Products in Building Envelope & Roofing: Asphalt

Oppanol® B 12 SFN is used in the manufacturing of adhesives, sealants, lubricating oils, coating compounds, and chewing gum. It consists of medium-molecular-weight polyisobutenes, which are soluble in aliphatic, aromatic, cyclic, and halogenated hydrocarbons. Their solvation tendency increases with the length of the hydrocarbon chain.

SILRES® BS 68 is a solvent-thinnable silane/siloxane mixture. It is used in diluted form for the hydrophobic impregnation of mineral construction materials and as a primer for mineral substrates. The concentrated product is also employed in the manufacturing of bitumen-bound minerals or as a binder for mineral systems. The product develops its hydrophobic effect through a reaction with atmospheric moisture or water adsorbed onto the pores and capillary walls of the construction material. SILRES® BS 68 is characterized by higher alkali resistance compared to pure methyl silicone resins, and the water vapor permeability of the construction material is only slightly affected.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Redicote E-62 is a emulsifier for the production of rapid- and medium-setting anionic bitumen emulsions for use in chip seal (surface dressing), tack coat and open-graded cold mix

Diamine OLBS is an active adhesion agent for hot bitumen, cut back bitumens, soft bitumens and emulsions used in surface dressing (chipseal), and cold and warm mixes including those using reclaimed materials.

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-16 is a liquid emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal, tack coat and open graded cold mix. Active adhesion promoter for pre-coated chips, cutback or soft bitumen.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Diamine HBG Pellets is an active adhesion agent in solid (pellet) form for hot bitumen, cut back bitumen, and soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Redicote E-9 is a emulsifier for cationic rapid- and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Wetfix 312 is a liquid adhesion promoter for hot and warm mix. It is an adhesion promoter for cold and warm mix based on cut-back bitumen. Adhesion promoter and coating aid for foamed bitumen cold mix.

Redicote EM22 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat.

Redicote 75TX is a emulsifier for coal tar pitch and bitumen based sealers in clay stabilized recipes. Adhesion promoter for cutbacks and industrial products based on bitumen,

Wetfix BE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cut-backs. It is an adhesion promoter and coating aid for foamed asphalt cold mix.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Redicote EM44 is a liquid emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat. Emulsifier for phosphoric acid slurry and micro surfacing systems.

Redicote EM-44A is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal, tack coat and open-graded cold mix. Emulsifier for slurry surfacing and cold mix when used with phosphoric acid.

ETONIS® 7145 A is a surfactant stabilized vinyl acetate-ethylene copolymer dispersion designed for cold asphalt applications. It has a glass transition temperature (Tg) of 0 °C, providing optimal performance in low-temperature environments. ETONIS® 7145 A offers outstanding film flexibility, wet track abrasion resistance, and superior adhesion properties, making it a reliable choice for cold asphalt formulations.

ETONIS® 7245 A is a vinyl acetate-ethylene copolymer dispersion stabilized with poly(vinyl alcohol). It has a glass transition temperature (Tg) of +23 °C and is specifically designed for asphalt emulsion-based applications. ETONIS® 7245 A offers exceptional adhesion, abrasion resistance, tensile strength, film flexibility, and shorter drying time.

ETONIS® 7142 A is a dispersion of vinyl acetate-ethylene copolymer. It possesses a glass transition temperature (Tg) of -15 °C and is specifically designed for use in asphalt emulsion-based applications. This product enhances various properties such as film flexibility, adhesion, and drying time. ETONIS® 7142 A is suitable for modifying both anionic and cationic asphalt emulsions, offering advantages like rapid setting speeds, easy machining, and effortless clean-up.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 791 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SIS 1105 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SBS 791H is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SIS 1126 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 16% and 50% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1124 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 14% and 25% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1209 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 29% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1106 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 15% and 17% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Calumet PG 58-28 is used in road construction and roofing application as well as a wide range of specialty products. Calumet produces asphalt at three refineries, Princeton, LA, Shreveport, LA and Great Falls, MT. Our Princeton refinery produces materials used in the roofing industry, primarily coating asphalt used in the manufacture of shingles. Our predictable crude slate means our asphalt has consistent properties.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Calumet Shingle Coating is used in road construction and roofing application as well as a wide range of specialty products. Calumet produces asphalt at three refineries, Princeton, LA, Shreveport, LA and Great Falls, MT. Our Princeton refinery produces materials used in the roofing industry, primarily coating asphalt used in the manufacture of shingles. Our predictable crude slate means our asphalt has consistent properties.