Products in Building Envelope & Roofing: Dimensional Stability

Crystic® Polyester Resin 125PA is a quality orthophthalic-based unsaturated polyester resin developed specifically for the manufacture of GRP moldings. This medium-viscosity polyester resin meets the requirements of BS 3532:1990 as a type "A" resin and can be used for flat surface laminations. Laminates made with this product have good mechanical strength, high rigidity and impact resistance, and excellent dimensional stability. When used with the recommended curing system, its curing properties make it especially suitable for fast production processes.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

Next PC CX-01BK is PC UnFilled Black Compound.

TF-07-T is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

TC-06-T is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

UA-05-P is a Aramid fiber have one of the highest strength to weight ratio compared to other commercially available fibers. Aramid fiber properties depend on the manufacturing process and can vary quite a lot depending on the intended end use.

Divinycell PN is a structural thermoplastic core material perfectly suited in a variety of sandwich applications to increase performance and reduce weight. Divinycell PN is used in industrial, transportation, marine and wind applications. It is easy to machine and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and press bonding. The material has a stable closed cell structure and is insensitive to moisture, decay or rot, making it an excellent substitute for organic materials such as balsa and plywood. High density Divinycell PN (PN200 and PN250) is particularly suited for flooring, decking, local inserts in the way of fittings; either tapped or bolted through and has very good screw retention. Divinycell PN is 100% recyclable.

TX-10-P is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

Thermo-Cor™ FR 7.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

D10060 is EPDM based compound that is medium hard with dimension stability.

TG-06-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

US-16-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

ArmaPET™ Struct GR100 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.