Products in Building Materials: Polyamides

SINTERLINE® Unfilled are the first polyamide 6 powder range designed for selective laser sintering (SLS). This solution yields the mechanical and thermal performance required to make 3D parts printing a compelling option for prototyping and low to medium volume production.

Tarnamid® T- 27 GF20 FRV2 is a polyamide 6 containing 20% glass reinforced, heat stabilized, flame retardant, halogens and phosphorus free.

NBF-170 is a highly flexible multilayer nylon vacuum bagging film designed for processing of advanced composite structures and laminated security glass. The film is ideal for use in both oven and autoclave cures, up to a maximum recommended temperature of 335°F. Key benefits of this film are its high elongation and flexibility.

Badamid® B70 SM-Z2 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

Remo Polytechnik PRA6 G15 GR B is a black Polyamide 6 which is 15% glass bead reinforced.

Nylon 6 A1022GFL60(A) is a glass fiber-reinforced grade with low viscosity. It is used for injection molding applications.

JN Technologies Pte. Nylon Rod commonly known as polyamide rod or PA rod (PA), are a semi-crystalline polymers with very good mechanical properties, extreme toughness and excellent sliding and wear properties. The properties vary from hard, tough PA66 to soft, flexible PA12. Depending on the type, polyamides absorb different amounts of moisture, so influencing the mechanical properties and dimensional accuracy.

BONTAMIDE 2050 is a resin which has long pot life, excellent toughness

Next Nylon 6 Prime Series NM40-01BK is PA6 Mineral Fillled Black compound.

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties

Promyde® BF933 L is a high viscosity polyamide lubricated specially formulated for the production of films with a high transparency and improved elongation, tear and puncture resistance. Promyde® BF933 L can be processed in cast and blown film extruders. Promyde® BF933 L is specially recommended in asymmetric estructures to minimize curling, specific recommendations are available on request.

Sollamid B 2740 FV 15 features low viscosity Polyamide 6, reinforced with fiberglass and UV protected, intended for injection molding. Sollamid B 2740 FV features formulas with fiber percentages ranging from 10 to 50% in natural, black and custom colors.

Nylon 6 A1030BRL is a standard Nylon 6 grade with medium viscosity. It is used for injection molding applications.

Next Nylon 6 Prime Series NX-01NC is PA6 UnFilled Natural Compound.

Nylene Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die

RUGOPPA® P17-105 is a PPA/PA %35 glass fiber white (Heat aging) for injection applications.

Nylene Designed for very fast cycle time molding and parts requiring high flow rates, such as long thin parts or high cavitation tools Low viscosity nylon 6 with special nucleation for rapid part set-up and special flow enhancers to aid in molding Excellent choice for parts such as wire ties, clips, fasteners, bushings and bearings

Tarnamid® T-27 GF25 MT15 is a 25% glass fibers and 15% mineral filled polyamide 6 compound, heat stabilized.

Dissipative product based on Polyamide 6 (PA6). Unfilled.

PA66 GF 35% reinforced

PA 6 reinforced with graphite

SINTERLINE® 40 % GLASS FILLED are the first polyamide 6 powder range designed for selective laser sintering (SLS). This solution yields the mechanical and thermal performance required to make 3D parts printing a compelling option for prototyping and low to medium volume production.

Tarnamid® T-27 GF 25 is a 25% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

ROMILOY® 4010/02 UV GF8 is PA/ABS, extrusion and injection molding grade, 8% glass fiber reinforced, UV stabilized.

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

Nylene Unreinforced nucleated heat-stabilized nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with nucleation for faster part set-up Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

BONTAMIDE 2080 is a resin which has good adhesive properties, resin mortar.

NIRETAN B 27 M AE/V2 contains special characteristics such as high impact or impact modified, Flame retardant.

Nylon 6 A1030TF is a Lubricant grade with medium viscosity. It is used for injection molding applications.

Polifil® NYLON 6/6 combines good abrasion and chemical resistance. These properties have been proven to work in the following applications: valves, bearings and bearing cases. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

CENTROMID 6 E FG / PA 6 E FG is a high crystalline thermoplastic, which is comprised of one basic unit. The number 6 indicates the number of C-atoms of the basic molecular structure. PA 6 E FG possesses high toughness and heat stability. A high elastic-module is reached through hydrogen binding. PA 6 E FG is applicable within a temperature range of -40 to +160 °C. PA 6 E FG-parts are often used as bearings, gear wheels, rollers or seals. The EU-VO 10/2011-/FDA approval assures physiological safety. PA 6 E FG is available in the color natural.

LiNNOTAM with oil finely distributed in the material. LiNNOTAMGLiDE has the added Lubricant self-lubricating properties and has excellent wear resistance low coefficient of friction.

PA66 GF 15% reinforced

Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

RUGOPPA® P60 003 NC00 is a PPA %40 glass fiber natural (Heat Stb.) for injection application.

UNI-REZ 2671 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2671 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.