Products in Building Materials: Tubing

SLL118 is a Linear Low Density Polyethylene, copolymer of butene-1. This product is specifically designed for blown film extrusion in blends with other polyethylenes. The resulting films exhibit excellent processing performance, balanced optical and mechanical properties, and superior sealability. SLL118 boasts a very low gel amount and includes oxidant additives. Notably, this grade contains a minimum biobased carbon content of 87%, as determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

ELASTOSIL® R 420/60 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

ELASTOSIL® R 401/30 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

ELASTOSIL® R 401/80 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 401/70 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 420/40 S is a high-consistency silicone rubber (HCR) that features outstanding tear resistance and high transparency. The peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is known for its good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and demonstrate good processing characteristics.

ELASTOSIL® R 401/90 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 420/70 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

ELASTOSIL® R 401/60 KX is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 401/60 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 401/40 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 401/30 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 401/55 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

ELASTOSIL® R 420/50 S silicone rubbers feature outstanding tear resistance and high transparency. Peroxide-cured vulcanizates made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compounds are easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics.

ELASTOSIL® R 401/20 OH is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. They are known for their good flexibility, high transparency, and mechanical properties. The compounds can be easily pigmented with ELASTOSIL® Color Paste PT and have good processing characteristics. ELASTOSIL® R 401/20 OH serves as a low-duro base, offering acceptable to good mechanical properties and good processing properties. It is also suitable as a blending component to soften ELASTOSIL® silicone rubber compounds.

ELASTOSIL® R 401/50 S is a high-consistency silicone rubber (HCR). Vulcanizates cured with peroxide made from this compound exhibit a unique combination of characteristics. It is noted for its good flexibility, high transparency, and mechanical properties. The compound is easily pigmented with ELASTOSIL® Color Paste PT and has good processing characteristics.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® PTFE CD127E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD127E do not use ammonium salts of perfluorooctanoic acid (PFOA), making them an environmentally friendly option. They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires, making them ideal for a wide range of industrial applications.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® HR-907 Heat Resistant LM-ETFE is a specially designed low-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® PTFE CD123E are white, free-flowing powders made by coagulating aqueous dispersions of polytetrafluoroethylene. These grades are high molecular-weight homopolymers with excellent thermal stability. The processes used to make CD123E do not use ammonium salts of perfluorooctanoic acid (PFOA). They have been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.

AGC Chemicals Americas, Inc. Fluon® HR-930 Heat Resistant LM-ETFE is a specially designed high-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-720A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-720A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has better stress crack resistance compared to LM-730A.

AGC Chemicals Americas, Inc. Fluon® PTFE G163 is a virgin granular PTFE homopolymer. It is a fine powder grade used for molding but also intended as a feedstock for making filled PTFE compounds. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-740A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-740A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has a higher flow rate than LM-730A.

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

0.118"+/- .008_(3.00+/-.21 MM) 75 D_BRN_FKM_O-RING CORD

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.