Products in Building Materials: Light Weight

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).

Peerless Plastics & Coatings Hard Coated PETG is an enhancement to the normal PETG Sheet and offers enhanced abrasion resistance to an otherwise soft base material. The low comparable cost of PET & PETG ensure it is very popular for en-masse applications such as bus shelters or bathroom splash backs. Whilst the coated side will of lost it’s FDA Approval (as found with many PETG products), the coating can be applied single sided or coated in our MicroGuard™ Anti-Microbial Hard Coating for the ultimate in anti-bacterial protection.

From classical man-made fibers to man-made fibers on cellulose base to high performance fibers. Kevlar 220 dtex can be used custom-designed for BAFA®-laid scrims.

VITROFLEX TRANSPARENT MCA467NN is the acrylic pouring plate with transparent colors that allow vision through.

P.J. Murphy Forest Products 200-mesh is the finest particle size that offer in our website.

C-LT 1800 is a carbon fiber type.

Plastazote® is a closed cell, cross-linked polyethylene block foam manufactured using Zotefoams unique production process.Plastazote® 5SHD30BK-0220 is a high density polyethylene foam.

P.J. Murphy Forest Products 100-mesh can be manufactured coarser or finer as required.

Kayco Composites R25 is a rigid, closed-cell, high-density polyurethane foam core panel. The reinforced panel is a sandwich construction with fiberglass reinforcements. The fiberglass reinforcements are offered in several schedules.

L & L Products L-9060 Part A is a fire, smoke, and toxicity (FST) compliant, two-component light weight epoxy formulation designed for panel finishing and reinforcement of aircraft interiors.

ACM C800P is a Unidirectional Woven Fabrics with Standard fabric width of 300 mm and Custom width range of 120—1600 mm having EP/VE Resin compatibility. Unidirectional carbon tapes are carbon fabric with at least 85% of the filaments arranged in the same direction. Thin glass, aramid, or hot melt fibers are used as weft (cross fibers). This structure supports the high tensile strength of the carbon tape and makes it a relevant material in demand for construction and many other applications.

TYCOR® W7.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

Barracuda Advanced Composites Divinycell H45 DCI is a rigid PVC foam 45 kg/m³ with DCI cut for vacuum infusion ideal for sandwich structures with high rigidity (80 x 60 cm).

Soric® XF 6 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Flax 500 dtex is a natural fiber yarn that grows again, fibers fibers that decompose. Requirements that are easy to please, BAFA®-laid scrims.

Soric® XF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

AKSACA™ 12K A-42 is a High Quality Carbon Fiber.

RE-FLEX® 585A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

FC-3733 is made up of a Plain Weave with a Soft Typical Finish.

E-QX 9000 is a E-Glass fiber type.

T430 Fulcrum Thermoplastic Composite Tube is produced with a proprietary rigid engineering thermoplastic polyurethane matrix. The combination of ductile thermoplastic matrix with high strength continuous fibers results in excellent strength and stiffness combined with superior toughness. The resin offers excellent resistance to a broad range of chemicals, including acids, bases and organic liquids.

ArmaPET™ Struct FR100 is self-extinguishing version of ArmaPET Struct, we offer a structural foam core designed for applications with particularly stringent fire protection requirements.

Abdullah Al Barrak Plastic Products Polycarbonate Plain Sheet 1220 x 2440 is basically a formless resin possessing a perfect blend of mechanical, optical, thermal, and electrical properties as compared to other materials like metals, glass and other plastics. Polycarbonate Plain sheets are virtually unbreakable in nature and at the same time reflecting an unmatched combination of visual appeal, durability and excellent light transmission. With its high impact strength, polycarbonate Plain Sheet can stand up to anything and everything from stones to hammers, from rough handling during transportation to deliberate damage, without shattering or breaking. Due to its outstanding impact resistance feature in summers and winters, it has completely replaced to other plastic sheets.

Natex UD 220 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Uni-directional Natex® Fabrics with Laize 1000 mm and as 220 g/m2.

Bicell® is an extruded polypropylene sheet, consisting of several layers. The cell structure is the core of this sheet. Its main characteristics are high flexural resistance and a high compression strength.

T76 Fulcrum Thermoplastic Composite Tube is produced with a proprietary rigid engineering thermoplastic polyurethane matrix. The combination of ductile thermoplastic matrix with high strength continuous fibers results in excellent strength and stiffness combined with superior toughness. The resin offers excellent resistance to a broad range of chemicals, including acids, bases and organic liquids.

Policril® Standard 1290 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

THINPREG™ TP 513 is a prepreg resin matrix used for the manufacture of light weight prepreg molding materials. ThinPreg™ 513 is a versatile system that is used most often with carbon fiber, but can also be impregnated into a wide range of reinforcing fibers including quartz, glass, aramid etc.

R46 Fulcrum Thermoplastic Composite Rod is produced with a proprietary rigid engineering thermoplastic polyurethane matrix. The combination of ductile thermoplastic matrix with high strength continuous fibers results in excellent strength and stiffness combined with superior toughness. The resin offers excellent resistance to a broad range of chemicals, including acids, bases and organic liquids.

PTSCPH5-G900 is a thermoplastic polymer, made by the chemical industry and used in a wide variety of applications, including packaging, ropes, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.

Fiberglass Epoxy Tubing (CL) Commercial Carbon is constructed of fiber reinforced thermoset epoxy resin, fiberglass epoxy tubing (CL) is a lightweight, high strength, corrosion resistant material that can replace carbon steel, chromed steel, stainless steel, aluminum or brass in a variety of applications. General Purpose Fiberglass Epoxy Tubing.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

Abdullah Al Barrak Plastic Products Polycarbonate Textured Sheet 1220 x 2440 has a texture or pattern which is embossed on its surfaces. By the texture diffuses the natural light, which streams in and ensures uniform dispersion of light over a large scale area that can prevent glare. It is more used mainly in the partition with beautiful decoration effects. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Kayco Composites U30 is a rigid, closed-cell, high-density polyurethane foam core panel. It is a foam with no reinforcement.

GRANOC YARN XN-80-A2S used for industrial and sports application.

C-LT 1100 is a carbon fiber type.